RENOVATION DEVELOPMENT OF MALPURA GATE NEAR SANGANER ZONE

Amount

Site clearance by uprooting of trunk vegetation, bush, wood, trees and sapplings of girth upto 15cms and disposal of rubbish with in 50mtr. Including leveling and dressing of ground as per direction of Engineer incharge.

Add extra for decorative/ornamental Lime surkhi 1:2 plaster work with fine finish making kangoora, flowers, geometrical designs upto (khat) including preparation of Lime surkhi mortar 1:2 as per tradititional practice adding gur,methi,gugal etc. Above 25mmand upto 40mm thick

Making Gardana under ceiling/ chajja with katla stone and grinded Lime surkhi mortar 1:2 including moulding work and fine finishing with grinded Lime surkhi mortar 1:2 as per existing matching/ traditional practice completev in all respect;. - Size 25cm X 25cm.

Making Bend -patta, Cornice, Gola & String course with katla stone and Lime surkhi mortar 1:2 (projected ) and finishing with grinded Lime surkhi mortar 1:2 including moulding/ design work as per existing matching at site complete in all respect. - Size 15cm X 10cm.

Providing & applying Lime kara 1:2 (1lime cream : 2 Zikki powder) grinding mortar with grinding mill/manually (on lime surkhi/sand plaster base) on decorative/ornamental lime plaster in two coats.First coat applying 3mm to 4mm thick and curing properly at least 7 days,second finishing coat done after 7days of previous coat as per traditional practice.(thickness not more than 6 mm.)

Providing & fixing ashlar "Rain water Spouts" (3) lines dressed as per traditional practice / existing design / approved design size 60 x 30 x 25 cm, fixing the rain water spout with lime surkhi mortar 1:2, with proper slope complete in all respect.

Providing & fixing in lime surkhi mortar 1:2, single paitam (rebated) store doors, window and ventilator frames as per existing matching or approved quarry including removing of damaged parts of frame, the cuting of corner as per drawing complete in all respect. size 125mm x 100mm

Providing & fixing fine dressed machine cut sand stone Stone steps (Treads & risers) with round nising as per existing matching fixing in lime surkhi mortar 1:2 including pointing in lime cream and stone dust 1:1 with an admixture (50mm to 60mm thick)

Providing and Fixing fine dressed sand stone approved stone" Railing" as per existing design and matching with thambli, fixing of railing with proper adhesive /clips complete in all respect (thambli & clips paid seperately.) (a) 50 mm. thick with moulding/lining.

Providing and Fixing fine dressed sand stone /approved stone "Thambli" (katahara pillers including) kalash on top,fixing on dasa as per existing design for fixing of stone jalies/railings including making grooves as per required size. (a) Size 100x100x750mm including kalash with moulding.

Stone flooring work with chisel dressed surface of approved shade and quarry in irregular shape as per existing pattern on a base of grinded lime sand mortar 30mm thick and jointing with masaldar lime putty and stone dust mixed in 1:1 ratio with admixture of pigment (75mm thick) stone as per existing matching.

Providing and fixing fine dressed 35mm to 40mm thick " flooring " with white/light pink sand stone (machine grinded surface) machine cut of approved shade set in pattern over 30mm thick base of lime surkhi mortar 1:2 including jointing finished flush with lime putty and stone powder with an admixture of pigment complete in all respect.

Random Rubble stone masonary for foundation and plinth in Lime surkhi mortar 1:2 above 30cm. thick walls in : ( 1 Lime putty : 2 Surkhi including adding admixture like gur, methi etc. in mortar.)

Random Rubble stone masonary for superstructure, 4.50mtr. Height above plinth level/ one storey height above 30cm. thick walls in : Lime surkhi mortar 1:2 ( 1 Lime putty : 2 Surkhi including adding admixture like gur, methi etc. in mortar.)

Providing and laying lime concrete in foundation and plinth using 40% lime mortar and 20mm nominal size graded aggregate (crusher broken ) including ramming and watering complete in all respect comprising of : ( 1 Lime putty : 2 Surkhi mortar.)

Providing and spray/brushing of Gur, gugal & methi solution for bonding of lime work as per specification (200gm gugal, 200gm belgiri powder, 200gm methi powder and 1 kg. Gur mixed in 20litre water and boiled and sttired till the solution volume reduce upto 3/4th) using 15.00litre solution in 10.00sqm. area.

Steel-rod stitching incracked stone patties, beam,and lintels.Providing and fixing stainless steel rods of 90cms length of which 15cm on either side and cold bending at 90degrees. The stainless steel clamps to be fixed perpendicular to the crack by drilling in stone and fixing with cement and aradite mixture in such a way that the entire length of the rod is in complete contact of the stone and the bent ends are fully inserted in the cracked stone. Use 316 grade stainless steel charge per hole.steel rod charges are counted per kg.Holes with 6mm, 8mm, 10mm or 12mm dia.as per requirement of position.

Crack filling in masonry walls with grinded masaldar lime surkhi mortar 1:2 (adding gugal, gugal, methi, belgiri ) including cleaning the crack properly complete in all respect. Crack thickness above 25mm and up to 50mm (average)

Providing and fixing "Corrugated" surface sand stone/approved stone flooring for ramp-way with fine dressed corrugation work as per approved design and size over a base of of grinded Lime surkhi mortar 1:2 and jointed with masaldar lime putty and stone powder 1:1 with an adixure of pigment, complete in all respect, as per direction of Engineer Incharge. (a) 75 mm. thick stone slab

Providing/Carving/Fixing of Bansipaharpur or approved sand stone 2 Mt long benches with 75 mm thick pan patta dasa top fixed in stone pair as per detail drawings, design and as directed by engineer in charge complete in all respect.

Supplying & fixing fine dressed sand "STONE DUSTBIN" as per traditional design made of dholpur -white / Banshi paharpur / Sarmathura stone as per approved design ( size of dustbin inner dia 50cm , outer dia 65 cm & inner depth 67 cm ,outer height 75 cm.) including top rim with moulding work as per approved design ,complete in all respect.

Providing,carving and Fixing of interpretive signages in Bansi paharpur stone of size 1000x1300x50 mm on inclined plane .Engraving,painting of latters as per drawing and design.The signage stone shall be fixed on the post of same stone of size 300x 300 x 1050 above ground and 1/3 of total heigt of post shall be embedded in ground with neccesary earthwork and concreting etc.complete as per details and drawings and as directed by engineer incharge.

Painting with Stone color lining work in ceiling with approved shade & as directed by Engineer in charge

Pressure grouting with thin lime mortar slurry with added traditional admixture in cracks and joints which includes cleaning of joints / cracks with air blower or vacuum cleaner to remove loose particle, cleaning with water jet and then grouting to be done in voids in cycles till the complete filling of surrounding cracks and voids, this includes masonry repair work to consolidate the loose decayed stone masonry, complete in all respect as directed by Engineer in Charge.

Restoration & structural consolidation of stone masonry cracks of width 50mm and above by cleaning & widening of the existing cracks & filling bed plats or S.S. bars @ distance 450 mm c/c perpendicular to cracking line. Crack should be scaled with lime slurry & wedged key stones complete in all respect as per direction of Engineer in charge (crack filling should be done upto full depth of crack)