REPAIR / MAINTENANCE AND PAINTING OF STEEL FURNITURE ITEMS UNDER BSO OF GE SUKNA

Amount

Supply & replacement of following unserviceable items of Almirah steel large complete all as shown in drawing and as directed. (Drg No. - FD-67 & FD-1031)

Chromium plated handle

Base made out of 1mm thick MS sheet channel with ends covered and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Lock 50 mm, 4 lever with duplicate keys

Shelf made out of 1 mm thick MS sheet and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Refixing of existing shutter / shelf with necessary welding as required

75 mm MS hinges and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Supply & replacement of following unserviceable items of Chair CB with / without arms complete all as shown in drawing and as directed. (Drg No. - FD-75)

Welding of seat frame with legs of chair CB without arms.

MS flat iron 25 x 3 mm of 50 mm length and including welding & spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Seat frame made out of teak wood and including two coats french polish and canning for chair CB with arms complete.

Back frame made out of teak wood and including two coats french polish and canning for chair CB with arms complete.

Seat frame made out of teak wood and including two coats french polish and canning for chair CB without arms complete.

Back frame made out of teak wood and including two coats french polish and canning for chair CB without arms complete.

Hand rest made out of teak wood and fixed with screws and including two coats french polish for chair CB with arms complete.

Fixing only existing serviceable arms with new screws and including one coat french polish for chair CB with arms complete.

Hard rubber shoes

Supply & replacement of following unserviceable items of Chair verandah complete all as shown in drawing and as directed. (Drg No. - FD-19 & FD-256)

Welding in joint of the seat frame with legs

Removing unserviceable plastic cane & including re-canning in true Godrej pattern with 1st quality 4 mm wide and half round oval shape virgin plastic cane of white colour. The border of seat / back shall be weaved with 4 mm wide 1st quality virgin plastic cane (white colour) complete all as specified and directed:- Note: The re-canning shall be carried out only after finishing painting of item as required.

Hard plastic shoes

Supply & replacement of following unserviceable items of Teapoy verandah complete all as shown in drawing and as directed. (Drg No. - FD-383)

Top made of 18 mm thick prelaminated particle board, one side prelaminated with decorative choice lamination and other side balancing white lamination with teak wood edging all round and including two coats french polish complete.

Hard rubber shoes

Welding in joint of the legs and frame including supply and fixing of new MS cleat

Supply & replacement of following unserviceable items of Chair CB with arms (Cushion padded seat & back) complete all as shown in drawing and as directed. (Drg No. - FD-75)

Seat made out of padded cushion with rexine cover.

Back made out of padded cushion with rexine cover.

Hand rest made of 2nd class hard wood frame & padded cushion with rexine cover.

Supply & replacement of following unserviceable items of Locker steel complete all as shown in drawing and as directed. (Drg No. - FD-257 & FD-1029)

Chromium plated handle (set of two)

Legs made out of 1mm thick MS sheet and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Chromium plated hasp and staple of size 100 mm

300 mm long chromium plated hanging rod of 20 mm dia & 1.6 mm wall thickness

Supply & replacement of following unserviceable items of Almirah small steel (1/2 Hanging & 1/2 Shelving) complete all as shown in drawing and as directed. (Drg No. - FD-114 & FD-1034)

Chromium plated handle

Base made out of 1mm thick MS sheet channel with ends covered and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Lock 50 mm, 4 lever with duplicate keys

Supply & replacement of following unserviceable items of Almirah small steel complete all as shown in drawing and as directed. (Drg No. - FD-1032)

Chromium plated handle

Base made out of 1mm thick MS sheet channel with ends covered and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Lock 50 mm, 4 lever with duplicate keys

Shelf made out of 1 mm thick MS sheet and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Supply & replacement of following unserviceable items of table officers steel complete all as shown in drawing and as directed. (Drg No. - FD-1003)

Leg made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Long rail made out of 25 x 40 x 1 mm mild steel 'U' section and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Short rail made out of 25 x 40 x 1 mm mild steel 'U' section and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Drawer small and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Top made of 18 mm thick prelaminated particle board, one side prelaminated with decorative choice lamination and other side balancing white lamination with teak wood edging all round and including two coats french polish complete.

Lock with duplicate keys

Hard plastic shoes.

Supply & replacement of following unserviceable items of Table clerk complete all as shown in drawing and as directed. (Drg No. - FD- 84 & FD-381):-

Leg made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Long rail made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Short rail made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Drawer and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Top made of 18 mm thick prelaminated particle board, one side prelaminated with decorative choice lamination and other side balancing white lamination with teak wood edging all round and including two coats french polish complete.

Locks with duplicate keys

Hard plastic shoes

Supply & replacement of following unserviceable items of Table Steel (900 x 900 x 760) complete all as shown in drawing and as directed (Drg No. FD-1009)

Top made of 18 mm thick prelaminated particle board, one side prelaminated with decorative choice lamination and other side balancing white lamination with teak wood edging all round and including two coats french polish complete.

Hard rubber shoes

Supply & replacement of following unserviceable items of Table with drawer steel (900 x 600 x 760) / Table for Hav's and OR's (steel) complete all as shown in drawing and as directed (Drg No. FD-1008 & FD-1007)

Top made of 18 mm thick prelaminated particle board, one side prelaminated with decorative choice lamination and other side balancing white lamination with teak wood edging all round and including two coats french polish complete.

Leg made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Long rail made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Short rail made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Drawer and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Lock with duplicate keys

Hard rubber shoes

Supply & replacement of following unserviceable items of Charpoy foldinng IP with hardtop complete all as shown in drawing and as directed. (Drg No. - FD-388(R))

Charpoy top made out of 12 mm thick plywood, BWR grade

Welding of MS conduits of legs with frame

Supply & replacement of following unserviceable items of Table Dining ORs Aluminium Top complete all as shown in drawing and as directed (Drg No. FD 165 (M))

Leg made out of 25 mm MS hollow square tube of 1.6 mm wall thickness and including spray paint with 2 coats of synthetic enamel paint over a coat of primer.

Welding of broken joints

Top made out of 18mm thick plywood BWR with 22 gauge aluminium sheet on top

Hard rubber shoes

Supply & replacement of following unserviceable items of Chair Revolviing Executive High Backcomplete all as shown in drawing and as directed. (Trade Pattern)

Maintenance free gas lift for all type of chairs revolving.

Padestal assembly, Injection moulded in black 30% glass filled nylon , 50mm MS castor pin of press fitted to each prong for holding the castor for all type of chairs revolving.

Twin wheel castors for all type of chairs revolving rest.

PU/Fabric seat & back duly upholstered with best quality Acrylic / polyester febric complete for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge. Note:- Set of 1 seat and 1 back shall be measured as 1 unit

Handles of chair revolving made of black integeral skin polyurethane reinforced with MS insert scratch proof complete for all type of chairs revolving with arm rest all as directed by Engr-in-Charge.

Supply & replacement of following unserviceable items of School Chair with hand board complete all as shown in drawing and as directed. (Trade Pattern)

Top made out of 18mm thick prelaminated particle board with PVC edging all around

Hinges made of 75x50mm MS flat welded with 100mm long pipe of 20mm dia

PVC Seat and back Note:- Set of Each PVC seat and back shall be measured as one unit

Supply & replacement of following unserviceable items of charpoy GI pipe complete all as shown in drawing and as directed. (Drg No. - FD-220)

Charpoy top made out of 12 mm thick plywood of size 6'6" x 3', BWR grade

Stiffner made out of 40 x 6 mm MS flat iron of 85 cm (+/- 2 cm) length with three holes of required size and including necessary screws / nuts, bolts & including spray paint with 2 coats of synthetic enamel paint over a coat of primer complete.

long rail made out from 32 mm bore GI pipe, medium grade, length as shown on drawing, both end threaded and including dismantling old long rail from charpoy.

Fixing only short rail made out from 32 mm bore GI pipe, cutting to length as shown on drawing, both ends threaded and including dismantling old short rail from charpoy Note:- Serviceable quantity of GI pipe obtained from dismantling of long rail shall be reused under this item by cutting the same to length of short rail.

Fixing only legs made out from 32 mm bore GI pipe, cutting to length as shown on drawing, one end threaded, supply and welding of 3 mm thick and 50 mm dia MS base plate at bottom of leg, 2 Nos. 25 x 3 mm flat iron made to shape of 15 mm dia clamp & welded to face of leg, one 16 gauge washer welded to bottom of lower clamp for fixing MNF set and including painting clamp & base plate with two coats of synthetic enamel paint over a coat of red oxide primer & dismantling old leg from charpoy Note:- Serviceable quantity of GI pipe obtained from dismantling of short rail shall be reused under this item by cutting the same to length of legs.

3 way GI elbow, medium grade, ISI marked, suitable for 32 mm bore GI pipe rails and including taking down.

6 mm thick GI check nut suitable for 32 mm bore GI pipe rails and including taking down

Wooden block at bottom of legs. made out of 2nd class hardwood.

M&L preparation of old painted steel surfaces of any description, width or girth, and including spray paint with one coat of synthetic enamel paint of approved colour for the following furniture items complete all as specified and directed:-

Almirah large steel with shelves (Drg No. - FD-67 & FD-1031)

Almirah small steel (1/2 Hanging & 1/2 Shelving) (Drg No. - FD-114 & FD-1034)

Book case steel (Drg No. - FD-90, FD-1028)

Book shelf open (small) steel (Drg No. - FD-69)

Book shelves open (large) steel (Drg No. - FD-69)

Locker steel (Drg No. - FD-257, FD-1029)

Rack steel 1830 x 760 x 1905 (Drg No. - FD-129)

Table with drawer steel 900 x 600 x 760 (Drg No. - FD-1008)

Table for Hav's and OR's (steel) (Drg No. - FD-1007)

Table clerk (Drg No. - FD-381)

Table officers steel (Drg No. - FD-84, FD-1003)

Chair CB without arms (Drg No. - FD-75)

Chair CB with arms (Drg No. - FD-75)

Chair CB with arms (Cushion padded seat & back) (Drg No. - FD-75)

Chair Verandah (Drg No. - FD-19, FD-256)

Teapoy verandah (Drg No. - FD-383)

Almirah steel (1270 x 765 x 440 mm) (Drg No. - FD-67, FD-243 & FD-1032)

Table Dining ORs Aluminium Top (Drg No. - FD-156(M))

Table Steel (900 x 900 x 760) (Drg No. - FD-1009)

Charpoy foldinng IP with hardtop (Drg No. - FD-388(R))

Trestle store room steel (Drg No. - FD-86(M))

Side Rack with tray (Steel) (Drg No. - FD-1023)

School Chair with hand board (Trade Pattern)

SHRI M K SAHA

M/S B K ROY

M. K. ENTERPRISES