PROVN OF INDOOR SPORTS COMPLEX WITH ALLIED WORKS AT AFMC PUNE

Amount

NOTE: Schedule ‘A’ Part I (SECTION 'A'), Part II to XII are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-13 only.

Total amount of Sch 'A' Part-I (SECTION 'A') (Building Works)

Total amount of Sch 'A' Part-I (Section 'B) Pre Engineered Building (PEB) works including Annexe building on both sides and RCC Framed Structure, (Design, Fabrication & Construction of foundation, flooring & superstructure of sports complex area including Annex buildings and Steps, etc complete all as given below :- Note :- This schedule is not pre-priced by MES and the rate indicated as "Rs. 0.00" under column 6 signifies this fact only.

(a) Design, Fabrication and Construction of Sports complex of size 83.41m x 44.71m (outer) x 9.75m (height at gutter level), including Annexe buildings (on both sides),Changing room for female, Store rooms, Cadets refreshment room, Stair cases, Lounge, Addl room for Gym, Changing room for male, Visitors rooms, VIP lounge, Reception cum office, Refreshment room ladies toilet, gents toilet, passage etc with Pre-Engineered Building structure (PEB), including Flooring of Sports Complex, Flooring of Annexe buildings and other buildings mentioned above, complete all as specified and as shown on drawings (b) Design and Construction of RCC Framed Structure in RCC M-25 (Design Mix) with flyash brickwork for Annexe Buildings both side complete all as specified and as shown on drawings.

Total amount of Sch 'A' Part-II (Internal water supply)

Total amount of Sch ‘A’ Part III (Internal Electric Supply)

Total amount of Sch ‘A’ Part IV (External Water Supply)

Total amount of Sch ‘A’ Part V (External Electric Supply)

Total amount of Sch 'A' Part-VI (Road, Path, Hardstanding and Culverts)

Total amount of Sch 'A' Part-VII (Sewage Disposal)

Total amount of Sch ‘A’ Part VIII (Area drainage)

Total amount of Sch ‘A’ Part IX (Boundary wall & steel gate)

Total amount of Sch ‘A’ Part X (Rain Water Harvesting)

Total amount of Sch ‘A’ Part XI (Excavation, Earthwork & Site Clearance)

Total amount of Sch ‘A’ Part XII (Demolition of existing building)

SCH 'A PART XIII (Miscellaneous B/R and E/M works) Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 6 signifies this fact only

S&F 15mm dia bore chromium plated 2 way bib cock with wall flange confirming to CAT No LYR-CHR-38041 of Jaquar or equivalent in makes listed in Appendix 'C', complete all as specified and as directed.

S&F health faucet with 8mm dia, 1.2 m long flexible tube and wall hook with NRV confirming to CAT No ALD-CHR-577 of Jaquar or equivalent in makes listed in Appendix 'C', complete all as specified and as directed.

S&F chromium plated Toilet paper holder confirming to CAT No ACN 1151 of Jaquar or equivalent in makes listed in Appendix 'C', complete all as specified and as directed.

S&F 15mm dia bore chromium plated bib cock with wall flange confirming to CAT No LYR-CHR-38037 of Jaquar or equivalent in makes listed in Appendix 'C', complete all as specified and as directed.

S&F 15mm dia bore chromium plated angular stop cock with wall flange confirming to CAT No LYR-CHR-38053 of Jaquar or equivalent in makes listed in Appendix 'C', complete all as specified and as directed.

S&F CP shower rose confirming to CAT No OHS 1709 of Jaquar or equivalent in makes listed in Appendix 'C', complete all as specified and as directed.

Supply and fix popup sockets for fixing in floor to match with floor, surface of 3 module of 6Amps complete all as specified and as directed of make Legrand or equivalent of make listed in Appendix 'C', complete all as specified and as directed.

Supply and fix popup sockets for fixing in floor to match with floor, surface of 4 module of 16Amps of make Legrand or equivalent of make listed in Appendix 'C', complete all as specified and as directed.

S&F LED tube light fitting wall mounted, 18 watt LED 6500K with opal white poly corbonate diffuser provided with high efficent integral constant current driver 230 Volts etc complete with mounting batten including all accessories internally prewired and including connecting up with twin core twisted flexible,copper conductor with suitable size from ceiling rose to connector confirming to Bajaj cat No BLRB DB 118 & BLRB 18 W CW LED of Bajaj or equivalent in makes listed in Appendix 'C', complete all as specified and as directed.

S&F LED wall mouted mirror light fitting, LED 10watt poly corbonate co-extrusion tube for LED light housing with engineering plastic end caps luminaire with constant current output driver, as per cat No.BCLSB 10WH of Bajaj or equivalent in makes listed in Appendix 'C', complete all as specified and as directed.

S&F surface mounted integral, round LED down lighter 18 watt with powder coated spun aluminium housing and dome shape oval diffuser, in built driver suitable for indoor application Cat No BGCML 18 W WH of Bajaj or equivalent in makes listed in Appendix 'C', complete all as specified and as directed.

S&F LED energy efficient security light fitting 25 watt LED, pressure die cast aluminium housing in heat risistance glass covered with IP 65 protection and including GI pipe 32mm dia 1.2 M length, medium grade tube including two Nos of clamps fixed with suitable size screws, Cat No BCLST 25W LED IV2 of Bajaj or equivalent in makes listed in Appendix 'C', complete all as specified and as directed.

S&F LED energy efficient flood light fitting 120 watt luminaire in pressure die cast housing for effecient dissipation of heat and anodised aluminium reflector with IP 66 protection and heat risistance toughened glass with 5 KV inbuilt surge protector and 10KV external surge protector, Cat No BJFL 120W LED I of Bajaj or equivalent in makes listed in Appendix 'C', complete all as specified and as directed.

Supply & fix ceiling fan, 1200 mm (48") sweep, 5 star rating BEE mark (after assembling the same) with the fan hook/box and connecitng up complete with and including electronic fan regulator stepped type, modular type, 2 module flush and with and including three core copper conductor flexible cord of 0.5 sqmm cross sectional area of required length from ceiling rose to porcelain connector block of fan. Make : Bajaj Cat No KASSEL STAR or equivalent in makes listed in Appendix 'C', complete all as specified and as directed.

Supply & fix exhaust fan 300mm sweep, 1400RPM, single phase, light weight, white/ivory plastic rust proof body & blades, self opening louvers for protection from birds and rain water, fixing by means of rugged bolts, nuts and washers etc on the round hole cut in wall, including three core copper conductor flexible cord of 0.5sqmm cross sectional area of required length from ceiling rose to porcelain connector block of exhaust fan suitable on working AC, SP 230 V electric supply. Make Bajaj Cat NO 70068 SUPREME PLUS or equivalent in makes listed in Appendix 'C', complete all as specified and as directed.

Supply & fix exhaust fan 380mm sweep, 1400RPM, single phase, light weight, white/ivory plastic rust proof body & blades, self opening louvers for protection from birds and rain water, fixing by means of rugged bolts, nuts and washers etc on the round hole cut in wall, including three core copper conductor flexible cord of 0.5sqmm cross sectional area of required length from ceiling rose to porcelain connector block of exhaust fan suitable on working AC, SP 230 V electric supply. Make Bajaj cat 70066 SUPREME PLUS or equivalent in makes listed in Appendix 'C', complete all as specified and as directed.

Supply & fix air circulator wall mounted fan of sweep 600mm, 1400RPM, single phase,200 W, with air delivery of capacity 250CMM 3 speed. Make Bajaj cat 250528 SUPREME PLUS or equivalent in makes listed in Appendix 'C', complete all as specified and as directed.

M &L for submain wiring with 4 single core FRLS PVC insulated unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 10.0 Sqmm drawn through concealed conduit and including PVC conduit heavy grade with and including 1 single core 10.0 Sqmm 1100 V grade FRLS PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.

M &L for submain wiring with 2 single core FRLS PVC insulated unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 6.0 Sqmm drawn through concealed conduit and including PVC conduit heavy grade with and including 1 single core 6.0 Sqmm 1100 V grade FRLS PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.

M &L for submain wiring with 2 single core FRLS PVC insulated unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 4.0 Sqmm drawn through consealed conduit and including PVC conduit heavy grade with and including 1 single core 4.0 Sqmm 1100 V grade FRLS PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified &directed.

M &L for submain wiring with 2 single core FRLS PVC insulated unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 2.5 Sqmm drawn through concealed conduit and including PVC conduit heavy grade with and including 1 single core 2.5 Sqmm 1100 V grade FRLS PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed.

M &L for submain wiring with 2 single core FRLS PVC insulated unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 2.5 Sqmm drawn through surface conduit and including PVC conduit heavy grade with and including 1 single core 2.5 Sqmm 1100 V grade FRLS PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed.

S&F vertical 6 way TPN double door, recess mounted /wall mounted MCCBs as incomer in 3 Pole V-Tec of 125 A rating & 16KA rupturing capacity and out going MCB SP/TP, MCCB is pre fitted at factory and including cost of MCCB all as specified and directed.

S&F MCB Single pole 240 volts 6 Amps to 32 Amps 10 KA complete all as specified and directed.

S&F MCB Single pole and neutral 240 volts 32 Amps 10 KA complete all as specified and directed.

S&F MCB Four Pole (TPN) 415 volts 63 Amps 10 KA complete all as specified and directed.

S & F foot valve gun metal assembly complete including suitable check nut etc of size 25mm dia confirming to IS 4038 all as specified and as directed.

S & F non return valve 40mm dia brass heavy duty ISI marked all as specified and as directed.

Supply, install and test and commissioning of self priming centrifugal pump set monoblock on and including base frame as per OEM specifications , electric driven, single phase, 230 volts with a discharge of 1.25LPS at a head of 15m driven by suitable 01 HP single phase motor and all accessories including suitable MS weather proof shelter and suitable single phase starter of make as mentioned in Appendix 'C', complete all as specified and as directed.

Cutting the existing 100mm dia CI line and tapping connection to 40mm dia GI pipe including fixing flange 100x100x80mm CI tee , CI 100mm one end flanged and one end spigot tail piece at both ends, 40mm threaded flange suitable for fixing with 80mm flange, gaskets, bolts, nuts etc for tapping and connecting up 40mm dia GI pipe line, including excavation and earth work and all other CI and GI fittings required, complete all as specified and as directed.

Supply, laying and testing XLPE insulated, screened, PVC bedded galvanised steel strip armoured electric power cable, heavy duty with aluminium conductor, 22000Volts grade earthed, laid in trenches, ducts, along pole, along transformer cross sectional area 95Sqmm 3 Core complete all as specified and as directed.

M & L for HT cable end termination box suitable for 22 KV (Earthed) grade cable 22000Volts grade 95 Sqmm 3 core XLPE for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm all as specified and as directed.

Supply install, testing and commsiioning plinth mounted step-down outdoor type distribution transformer HT 22KV, 3Ph, LT 433V, 4wire, capacity 100KVA copper wound, oil immersed, naturally cooled with external cooling tubes, core type, delta connected on primary (HV) side and star connected on secondary (LV) side in accordance with vector symbol DYN-11(Vector ground -4) with neutral brought on secondary (LV) side & having tapping in equal steps of 2.5% from (+) 5% to (-) 7.5% on primary side by means of hand operated off load tap changing gear, so as to change /correct LT voltage on secondary side including provision of all necessary standard fittings and mainly comprising of the following :- (a) Primary HT side having HT porcelain bushing 3Nos with brass gun metal bushing rods complete with nuts and washers . (b) One cable box on secondary (LT) side consisting of 4Nos porcelain bushing with GM bushing rods complete with GM nuts and washers with one No cable gland suitable for reception of outgoing LT PVC sheathed armoured cable of size 95Sqmm 3 core. (c) Oil conservator with filter type, drain valve and oil level indicator. (d) Dehydrating breather with first fill of dehydreting agent. (e) Explosive vent. (f) Thermometer pocket on tank cover. (g) One No 100mm dia dial typer thermometer vapour pressure type having range 0-120degree centigrade with temp reading pointer, max temp indicator and resetting device. Note: PCC plinth will be measured and paid separately.

Supply, installing, testing and commissioning, weather, dust and vermin proof LT distribution panel board factory made, outdoor type of suitable size so as to accomodate the following accesories, depth not less than 500mm, IP 54, and all as per IE rules, prewired and fabricated with 3.15mm thick CRCA sheet epoxy power coated double door with aprons, duly powder coated mounted on MS angle iron frame 50x50x6mm welded in shape with two coats of synthetic enamel paint over a coat of red oxide primer including necessary grouting in PCC 1:3:6 type C-1 using 20mm graded coarse stone aggregates complete with leg 50cm grouted in ground in PCC at 40cm above ground, including connection cable with cable glands, lugs etc and consisting of the following:- Note: PCC plinth will be measured and paid separately.

(a) Aluminium bus bar 300Amps-03 Nos for phases and 01 Nos for neutral duly colour sleeved mounted on epoxy insulator-01 Set

(b) Incoming

i) MCCB 200 Amps, FP, 415V, 50Hz ICU 35 KA thermally adjustable between 70-100% - 01 No

(c) Outgoing

i) MCCB 63 Amps, TP, 415V, 50Hz ICU, 25 KA thermally adjustable between 70-100% - 4 No.

ii) MCB 32 Amps, FP, 415V, 50Hz , 10 KA -01 No.

iv) LED type indicator lamp (R,Y,B) set of Three. - 01 Nos.

Note: Panel shall be manufactured by the reputed manufacturer who is possession of type test certificate by CPRI not older than ten years.

Supply, installing, testing and commissioning cubical type outdoor APFC panel, 4 stage ( 5+5+5+5) 20KVAR rating, complete with standard power contactors as required suitable for staged operation, heavy duty Gas filled capacitors with 63A, 25KA, 4 Pole,MCCB as incomer and suitable standard controls, factory made, outdoor type, made out of 3mm thick CRCA sheet weatherproof powder coated with IP-54 protection, mounted on angle iron frame and fixed on suitable PCC plinth all as directed. Note: PCC plinth will be measured and paid separately.

M&L for laying of RCC pipes of dia 150mm, class NP 2 with one coller per length of pipe, 2 Nos half round (for bottom and top) and before laying, excavated area shall be levelled all as specified and as directed.

Supply, install and errect in true vertical position steel tubular swaged welded poles swan neck type complete with MS base plate of 6 mm thick of size 300mmx300mm, finial taper plug, pole cap, bolts, nuts, washers and screws, pole made out of ERW MS tubing conforming to IS-2713 (Part II),1980 type 410 SP-31 (9 meters long) poles, painting with one coat red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bitumenous paint for portion embedded in concrete. Painting three black/red/bands at lower portion of pole of 300mm spacing, painting pole No with Black paint at suitable height, complete all as specified and directed. Note:- Excavation, earth work and PCC shall be measured and paid separately under respective item of relevent Schedule.

Dismantling of gang operated air break switch 22KV triple pole horizontal /vertical mounted including insulators and operating mechanism and refixing in same or any other location, connecting up complete all as specified and directed.

Dismantling of DO fuse including insulators 22KV triple pole and refixing in same or any other location, connecting up complete all as specified and directed.

S & F HT 22 KV insulators PIN type, polymer type including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut of standard size complete all as specified and directed.

S & F HT 22 KV insulators DISC type, porcelain, vitreous white/ brown/ green insulator or polymer type including cast iron stud. GI bolt, nuts, washers clamps, etc. suitable for fixing on cross arms complete all as specified and directed.

Supply and install HT 22KV outdoor type gang operated air break switch, triple pole, 3 insulator double stalk type suitable for horizontal or verticle mounting with complete accessories such as mounting channels, bolts & nuts, washers, GI operating rod of suitable length etc of rating upto 200 Amps including locking arrangements including godrej 7 lever lock navtal with 3 keys, connecting up complete all as specified and directed.

Supply and install drop out fuse unit expulsion type outdoor type 200 Amps rating single pole mounted on two insulators fixed to and including MS channels with nut bolts washers etc synthetic bounded fuse carrying tube complete with HT fuse elements 25A capacity for HT 22 KV working pressure all as specified and as directed.

Supply and fixing lightning arrestor non linear type with mounting accessories complete, fixed on cross arms of pole and connected with alluminium conductor with all fittings transmission class earth system, having discharge capacity of 10 kilo amps and suitable for working pressure of 22 KV grade all as specified and as directed.

Supply and fixing aluminium bus bar for 2/4 pole structure made out of aluminiumtube having outer dia 32mm and 6mm thick suitable for 22 KV complete with all suitable joints including all fittings/couplings and stainless steel nut, bolts, washers etc and insulated with colour sleevs as per colour code complete all as specified and as directed.

S & F LED street light fittings 30 W, IP 66 pressure die cast aluminium housing heat resistance toughened glass. IP 66 protection better optics for uniform distribution, complete and connecting flexible copper conductor wire PVC insulated of 2x2.5Sqmm and 1x2.5Sqmm as in earth conductor all as per Bajaj cat No BCLST 30W LED or equivalent of make listed in Appendix 'C', complete all as specified and as directed.

Supply, installing , connecting , testing and commissioning storage type water cooler 80 Litrs capacity and cooling capacity 40 Litrs per Hour, based on eco friendly gas R-134a all as directed at site including extending drain out pipe to the nearest drain system complete of make Blue Star/Usha/Voltas, all as specified and as directed.

M& L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick, buried vertically in ground (Earth pit not less than 2.25 metres deep below normal ground level and top edge of the plate not less than 1.5 m below ground level), connected to and including Galvanised steel earthing wire 4mm dia by means of bolts, nuts & checknuts and washers etc; GI pipe 15 mm dia medium grade pipe for protection of G.I earth strip, both to be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR-2009 Part-I, other end connected to electrical main switch board (inside the bldg) GI protection pipe buried in ground, laid under floors/plinths or fixed on walls or concealed in walls etc; with provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate , including PCC 1: 2 : 4 type B-1 earth pit with M.S angle iron frame, cast iron cover with locking arrangement, with G.I 20 mm dia medium grade pipe and M.S funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of strata & testing on completion.

M& L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick, buried vertically in ground (Earth pit not less than 2.25 metres deep below normal ground level and top edge of the plate not less than 1.5 m below ground level), connected to and including GI strip 32x6 mm by means of bolts, nuts & checknuts and washers etc; GI pipe 40 mm dia medium grade pipe for protection of G.I earth strip, both to be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR-2009 Part-I, other end connected to electrical main switch board (inside the bldg) GI protection pipe buried in ground, laid under floors/plinths or fixed on walls or concealed in walls etc; with provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate , including PCC 1: 2 : 4 type B-1 earth pit with M.S angle iron frame, cast iron cover with locking arrangement, with G.I 20 mm dia medium grade pipe and M.S funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of strata & testing on completion.

Supply, laying, testing and commissionnig of UG LT cables 1100 volts grade, XLPE insulated, screened and PVC sheathed, galvanised steel strip or wire armoured with multi stranded aluminum conductor, ISI marked, heavy duty including cable glands, cable lugs in LT panel/MDB in building etc to suit the cable including material and labour for all jointing/connecting material as required size, cables laid in trenches/ducts/under plinth floors passing through pipes etc, fixed on wall complete of following sizes :-

(a) 95 sqmm x 3.5 core

(b) 35 sqmm x 3.5 core

(c) 25 sqmm x 4 core

(d) 16 sqmm x 4 core

(e) 10 sqmm x 4 core

(f) 10 sqmm x 2 core

M & L for 150mm thick (compacted thickness) Wet Mix Macadam (WMM) laid in two layers 75mm each layer, laying spreading (with paver finisher only) and compacting base course of graded stone aggregates and granular material conforming to MORT&H specifications,(Table 400-II) in layers of equal compacted thickness each, consolidated, including pre-mixing the material with water at OMC in mechanical mixer, carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub base/ base course and compacting with power vibratory roller to achieve the desired density complete as per MORT&H specification clause -406 including material, labour, machinery, lighting, guarding and maintenance of diversion, complete all as specified and as directed.

M&L for 60mm thick machine pressed pre-cast cement concrete interlocking paver blocks with grey cement and pigment, rubber moulded any shape and size confirming to IS 15658-2006, M-35 grade as in floor/pavement laid over and including 30mm thick crushed stone sand complete all as specified and as directed.

Cutting of whole Jungle/badam/Neem/ Mango/Ashoka trees of girth exceeding 30cm and not exceeding 100cm including cutting of branches etc. complete and grubbing up tree trunk including cutting of trunk portion protruding over ground, digging out roots, filling holes and levelling off ground, staking of serviceable material and removing of unserviceable material from site and clearing the site complete, all as specified and as directed.

Cutting of whole Ashoka/Neem/Jungle trees of girth exceeding 100cm and not exceeding 150cm including cutting of branches etc. complete and grubbing up tree trunk including cutting of trunk portion protruding over ground, digging out roots, filling holes and levelling off ground, staking of serviceable material and removing of unserviceable material from site and clearing the site complete, all as specified and as directed.

Cutting of whole Neem/Jungle trees of girth exceeding 150cm and not exceeding 200cm including cutting of branches etc. complete and grubbing up tree trunk including cutting of trunk portion protruding over ground, digging out roots, filling holes and levelling off ground, staking of serviceable material and removing of unserviceable material from site and clearing the site complete, all as specified and as directed.

Cutting of whole Jungle trees of girth exceeding 250cm and not exceeding 300cm including cutting of branches etc. complete and grubbing up tree trunk including cutting of trunk portion protruding over ground, digging out roots, filling holes and levelling off ground, staking of serviceable material and removing of unserviceable material from site and clearing the site complete, all as specified and as directed.

Cutting of whole Neem/Jungle trees of girth not exceeding 10m including cutting of branches etc. complete and grubbing up tree trunk including cutting of trunk portion protruding over ground, digging out roots, filling holes and levelling off ground, staking of serviceable material and removing of unserviceable material from site and clearing the site complete, all as specified and as directed.

VADERAS INTERIORS AND EXTERIORS