SPECIAL REPAIR FOR UPGRADATION TO WASHING POINT AREA OF COOK HOUSE BLDG NO T299A T300A T216A T217A T218A TO T222A T223A TO T227A AND T228A TO T230A AT CAMP AREA OF CPG UNDER GE EAST DELHI CANTT 10

Amount

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for wall sahfts manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed.

Returing filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm thick in soft or loose soil complete all as specified and as directed.

Removing excavated matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed.

Demolition of existing RCC posts or struts or any type and in any position including taking out embedded portion and making good distrubed ground etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Exavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out returning filling in ramming earth or broken rubble in layers not exceeding 25cm watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed.

M & L for PCC 1:2:4 type B-1 using 20mm graded stone agg as in surface channels complete.

M & L for demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.

M&L for brick work with sub class `B' bricks of old size, straight or curved on plan to any radious built in CM 1:4 complete all as specified.

Taking down cement or cement lime plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces & finished even and fair without using extra cement in any position, complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

M & L 18 to 20 mm thick granite (colour as approved by GE) of any type work table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms, water point platforms, floor etc and like in over 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab, notching and moulding complete all as specified and as directed.

M&L for non skid colouired ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6, inluding dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and as directed.

M&L for glazed coloured ceramic tiles in vertical surface 300mm x 600mm x 7-8mm thick (with pattern and border work as required at site) set and jointed in neat cement sluury and pointed in white or coloured cement to match incl 10mm thick rendering in CM 1:4 etc complete all as specified and as directed.

M&L for Hard core of gauge exc 63mm but not exc 100mm(broken bricks) deposited spread and leveling in layers n exc 15cm thick watred and raming to a true surface complete all as specified and directed.

S & F Steel work in tubular trusses, column poles and other similar works including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified.

S&F mild steel framed work as in grills, grating etc with end of bars shouldered and or riveted forged into spikes framed guard bars, barred iron doors ladder framed balusters, ralling ,frame work for water tanks and similar works complete conforming to Fe 290 Gde E-165 complete all as speficied and directed.

Prepainted galvalume aluminium zinc coating GI based corrugagted steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof convering /cladding to wall fixed with self tapping screws including dismantling of plain or corrugated AC sheeting any gauge thickness as in roof covering complete all as speficied and as directed.

S&F Prepainted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof convering /cladding to wall gully trap for rainwater, fixed with self tapping screws including dismantling of plain or corrugated AC sheeting any gauge thickness as in roof covering complete all as specified and as directed..

M&L for 75 mm thick cement concrete 1:4:8 type D-2 (Using 40mm graded agg) as in sub base.

M&L for red sand stone 40mm thick slab for steps , cooking platforms water point platforms , floor over 20mm thick screed bed in CM 1:6, jointedx and pointed in cement mortar 1:3 complete all as specified and as directed.

M&L for pre-polished coloured chequred cement concrrete tiles 300mm x300mm x22-25mm thick set jointed and pointed in neat cement slurry over 20mm thick screed bed in CM 1:6, complete all as directed.

M&L for machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) confirming to IS-15658-2006 if 60mm thick M-35 Grade laid dry in floor/path over 50mm thick sand cushion, complete all as specified and directed. Note:- cost of sand inlcuded.

Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified.

Preparation old painted steel surfaces of any decription over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of new plastered external wall surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/Ltr and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistence exterior paint of required shade (Company Depot Tinted) over and including priming coat of exterior primer applied @ 0.90 Litre /10 Sqm over new surfaces complete all as specified.

M&L preparation of new plastered /unplastered surfaces of walls over 1mm thick wall care putty, again sand papering thus making surface good and applying Two coats of Oil Bound Distemper on wall surfaces over a coat of primer complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces of wall including brooming down or scraping down with steel wire brushes of smoke spots, moulds, moss effocesent salts and treading oil and gressy spots, filling the cracks , holes with POP/Putty and applying one coat of weather shield exterior emulsion paint (ultima luxury of Berger or equivalent)complete all as directed.

M&L for preparation of plastered or unplastered old decorated surfaces of wall including brooming down or scraping down with steel wire brushes of smoke spots, moulds, moss effocerent salts and treading oil and gressy spots, filling the cracks , holes with POP/Putty and applying One coat of oil bound distemper, complete all as directed.

S&F in repairs Bib tap standard of PTMT any colour high pressured screwed for iron pipe and fixed (minimum weight 15mm-90gms/20mm-125gms) complete all as specified and directed.

PVC (SWR) pipes, Floor/Nahani trap, plain with grating including joininting to waste pipe with solvent cement dia of outlet 110mm complete all as specified and directed.

Dismantling of eaves gutters/rain water pipes /PVC Soil waste pipes of any size fixed walls/floors with all fittings, complete all as specified and dirrected.

PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed in walls, complete all as specifed & directed.

PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed in wall, complete all as specified and directed.

PVC (SWR) pipes, 110mm bore junction double ( double T), equal or unequal with access door, complete all as specified and directed.

PVC (SWR) 110mm bore bends with access door, complete all as specified and directed.

PVC (SWR) 75mm bore bends with access door complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections , including cleaning for refixing or removal to store complete all as specified.

Taking up or down 20 mm bore steel tubing and connections , including cleaning for refixing or removal to store complete all as specified.

Taking up or down 25 to 32mm bore steel lubing connections, including cleaning for refixing or removal to store complete all as specified.

Taking up or down 40 to 50mm bore steel tubing and connections, including cleaning for refixing or removal to stores complete all as specified.

S&F 15mm bore tubes medium grade galvanised with all fitting such as Tee, bend, socket, nipple etc. and fixed complete to wall and ceiling or laid in floor.

S&F 20mm bore tubes medium grade galvanised with all fitting such as Tee, bend, socket, nipple etc. and fixed complete to wall and ceiling or laid in floor.

S&F 25mm bore tubes medium grade galvanised with all fitting such as Tee, bend, socket, nipple etc. and fixed complete to wall and ceiling or laid in floor.

S&F 50mm bore tubes medium grade galvanised with all fitting such as Tee, bend, socket, nipple etc. and fixed complete to wall and ceiling or laid in floor.

S&F Rotational moulded polythlene water storage tanks 1000 ltr capacity tripple layered (cylindrical vertical with closed top) hoised and fixed in position including 20mm dia PTMT ball valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S&F Rotational moulded polythlene water storage tanks 2000 ltr capacity tripple layered (cylindrical vertical with closed top) hoised and fixed in position including 20mm dia PTMT ball valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete

S&F in repairs 15mm bore Gun-metal. Globe or gate valves with iron wheel head screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs 20mm bore Gun-metal. Globe or gate valves with iron wheel head screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs 25mm bore Gun-metal. Globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all specified and as directed.

S&F in repairs 50mm bore Gun-metal. Globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all specified and as directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete.

M&L for form work to soffits of suspended slabs such as roof slabs, floor, slabs landings and stair and similar work not exc 20cm thick flat rough to receive plaster all as specified and directred.

M&L for formwork to edges of concrete flats, treads, breaks in floors, windows cills, concrete railings, opening in concrete wall floor and roofs n exc 20cm wide and sides of RCC/PCC bands in wall horizontal or sloping and similar work exc exc 10cm but n exc 20cm wide complete.

M&L for mild steel TMT bar 10mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns booking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for RCC M25 Design mix using 20mm graded agg as in slabs, supporting on wall, landings balconies and in shelves, over drain, washing platform etc and the like complete all as specified and as directed.

S&F for precast RCC manhole covers 75mm thick medium duty conforming to IS-12592 including demolition of existing manhole covers of any type and size complte all as specified and as directed.

Demolition and breaking up drain pipes (SGSW/AC/RCC) including haunching and benching set in cement mortar for above 300mm and upto and including 600mm dia, pipe and removal of debris from site complete all as specified and as directed.

M&Lfor 600mm dia (Internal dia) RCC hume pipe class NP-2 laid and jointed complete with collars complete laid in trenches and tested complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 using 40mm grade stone aggregate as in bed to drain pipe 600mm bore incl forming cradles/haunching complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-2 (Using 40mm graded stone aggregatge) as in foundation filling and mass concrete complete all as specified directed.

M&L for PCC(1:2:4) type B-0 using 12-50 mm gr4aded stone aggregatge as in brenching for manholes , drains, bands, coping, bed plate etc with slightly chamfered or founded angles including necessry form work, if any, and finishing exposed surface even and smooth without using extra cement complete all as specified & directed.

Singh Associates

MINHAS CONSTRUCTIONS

M/S Yamin

Simran construction Company

garnet engineers contractors

imran construction company

The new hut furnitures

V M CONSTRUCTION