SPECIAL REPAIRS TO CERTAIN BILLETS AT AF STATION HAKIMPET

Amount

SCHEDULE 'A' PART -I (B/R PORTION) :- Demolition of cement concerte in ground floors/ first floor and paving including tiles n exc 15 cm thickness (below or above ground level )unreinforced concrete including removal of spoil/ demolished material out of the premises of the site complete all as specified and as direcetd.

M&L for 25 mm thick Plain Cement Concrete 1:2:4 type B-0 mix (using 12 mm graded stone aggregate) laid in flooring complete all as specified and as direcetd.

M&L for for Non-skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as direcetd.

M&L for for digital coloured glazed ceramic tiles of sizes 300 mm x 450 mm X 7 mm thick jointed in neat cement slurry, laid over including 10 mm thick rendering coat/backing layer in CM (1:4) and pointed in white or coloured cement to match the shade of tile as in vertical surfaces such as dado / skirting complete all as specified and as direcetd.

M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing and including 15 mm thick screed bed / bedding layer in CM (1:6) complete all as specified and as direcetd.

M&L for Machine cut kota stone slab 20-25 mm thick as in riser of steps, skirting, dado and pillar over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 10 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as direcetd.

Taking down cement plaster including tiles if present on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar including removal of spoil/ demolished material out of the premises of the site complete all as specified and as direcetd.

M&L for Brick work with fly ash bricks, straight or curved on plain exc 6 m mean radius, built in cemrent mortar 1:4 complete all as specified and as direcetd.

M&L for rendering to brick masonry surfaces 15 mm thick in cement mortar 1:4, complete all as specified and as directed

M&L for Complete removal of existing treatment on walls complete all as specified and as direcetd.

M&L for applying two coats of Oil bound distempering to walls over 3 mm thick wall care putty with white or tinted complete all as specified and as direcetd.

M&L for three coats of white wash over a coat of primer on newly plastered surfaces of walls complete all as specified and as direcetd.

M&L for two coats of white wash over a coat of primer on old plastered surfaces of ceiling complete all as specified and as direcetd.

Taking down Chowkhats or frames with shutters exc 1.5 sqm but not exc 4 sqm each complete all as specified and as direcetd.

Supply and fix solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as direcetd.

Supply and fix Factory Made wood free EPS Solid PVC Moulded Door Shutter, 28 to 30 mm thick (styles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as direcetd.

S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for PVC door frame complete all as specified and as direcetd.

Supply and fix 150 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as direcetd.

Supply and fix 125 mm size extruded aluminium door handles fabricated type complete all as specified and as direcetd.

Supply and fix Pressed steel frames125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as direcetd.

Supply and fix Flush shutters single leaf/ double leaf,30 mm thck solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as direcetd.

Supply and fix 30 mm thick factory made skeleton shutters, open rebated and preparedto receive gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and as direcetd.

Supply and fix mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and as direcetd.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as direcetd.

M&L for Refixing Shutters of anydescription not exc 1sq. m each complete all as specified and as direcetd.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified and as direcetd.

S&F 100 mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed, for flush pressed steel door frame complete all as specified and as direcetd.

Supply and fix 200 mm size Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed by the Engineer-in-Charge

Supply and fix 150 mm size extruded aluminium door handles fabricated type complete all as specified and as direcetd.

S&F 200 mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as direcetd.

Taking down Chowkhats or frames with shutters not exc 1.5 sq. m each complete all as specified and as direcetd.

S&F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as direcetd.

S&F Powder coated aluminium windows, sliding type three track, two for fixing glass sections and one shutter with wire mesh aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as direcetd. Note : - Glass and Wire cloth will be measured and paid separately under relevant item.

Supply and fix 4 mm thick plain sheet glass glazing any size with rubber packing where ever required complete all as specified and as direcetd.

Supply and fix powder coated aluminium grill any size 8 mm thick complete with frame or channel section including all necessary fittings complete all as specified and as direcetd.

S & F in repair vitreous china, half stall urinal white with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) incl. providing anf fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excluding fixing supply of pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed

S&F in repairs vitreous China wash hand basin of size 580 mm x 450 mm white,oval type including cutting for fixing in the granite platform complete all as specified and as direcetd.

S&F in repair Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.. complete including seat cover for pedstal pan complete all as specified and as direcetd.

Supply fixed in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete all as specified and as direcetd.

S&F in repair angle valves 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as direcetd.

Supply and fix in repairs 15 mm bore LDPE pipe 45 cm long with brass nuts and washers on both ends complete all as specified and as direcetd.

S&F in repair 15 mm bore fancy concealed type,Stop valves,chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as direcetd.

S&F in repair Chromium plated shower roses of size 125 mm with or without swivel joints, any size, including fixing to 15 mm dia steel pipe or union complete all as specified and as direcetd.

S&F in repair 15 mm bore fancy type long body Bib tap crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as direcetd.

S&F in repair 15 mm bore piller taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure complete all as specified and as direcetd.

S&F in repairTubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and as direcetd.

Supply and fix 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin / urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed complete all as specified and as direcetd.

Taking down steel tubing and connections 15 mm bore, including cleaning for refixing or removal complete all as specified and as direcetd.

Description all as per Ser item No.49 here in before but 20 mm bore complete all as specified and as direcetd.

Description all as per Ser item No.49 here in before but 25 mm bore complete all as specified and as direcetd.

Supplying and laying 16 mm of CPVC pipes with SDR 13.5 pipes & plain CPVC SDR 11 fittings fixed complete to walls, ceilings or in floors etc. in repairs including concealed piping after cutting in brick work/ stone masonry walls where ever required complete all as specified and as directed.

Description all as per Ser item No 52 above but 20 mm dia complete all as specified and as directed.

Description all as per Ser item No 52 above but 25 mm dia complete all as specified and as directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) as in platforms, urinal partitions and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as direcetd.

Dismantling 1000 Ltrs capacity water storage tanks and removing to store etc complete all as specified and as direcetd.

S & F 1000 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position complete all as specified and as direcetd.

S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142 gms / 20 mm-210gms) complete all as specified and as direcetd.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe complete all as specified and as direcetd.

S&F PVC (SWR)110 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as direcetd.

S&F PVC (SWR)110 mm pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as direcetd.

S&F PVC (SWR) bends of 110 mm bore complete all as specified and as direcetd.

S&F PVC (SWR) branch piece of 110 mm bore, single (single Y) equal or unequal complete all as specified and as direcetd.

S&F PVC (SWR) vent cowl of 110 mm bore complete all as specified and as direcetd.

S&F PVC (SWR) floor trap of 75 mm, plain with grating including jointing with solvent cement complete all as specified and as direcetd.

S&F in repair sinks with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x160 mm complete all as specified and as direcetd.

M&L for Plain Cement Concrete 1:3:6 type C-2 mix (using 40 mm graded stone aggregate) laid in plinth protection complete all as specified and as direcetd.

Dismantling wrought iron or mild steel work of any description complete all as specified and as direcetd.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as direcetd.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome on complete all as specified and as direcetd.

M&L for two coats of synthetic enamel paint over old painted surfaces of any description including preparation of old surfaces complete all as specified and as direcetd.

Supply and fix in repairs 25 mm dia mild steel, chromium plated curtain rods with fixing brackets, stops, rollers etc.and taking down old pipe complete all as specified and as direcetd.

S&F Powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as direcetd.

SCHEDULE 'A' PART -II (E/M PORTION) :- Taking down copper / aluminum point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, lamp holders, light fittings etc removing materials for taking credit and making good disturbed surfaces of walls, floors etc. including paint tuch up to match with the existing surface as per site requirement complete all as specified and as directed.

Taking down existing unserviceable MCCB (any type and capacity) and making good the disturbed surface of walls including paint touchup to match with the existing surfaces complete all as specified and as directed.

Taking down existing unserviceable distribution board with MCBs, switch fuse unit, enclosureand making good the disturbed surface of walls including paint touchup to match with the existing surfaces complete all as specified and as directed.

Taking down Existing old unserviceable submain wiring of any description /type size and removal of UNSV material from site and making good the disturbed surface of walls / ceiling so as to match with the existing finishes complete all as specified and as directed.

M&L for point wiring with 1.5 sq.mm FRLS insulated multistranded copper conductor ,1100 volts grade single core PVC insulated and unsheathed cable drawn through new PVC conduit/casing capping of suitable size but not less than 20 mm dia on surface of stone/concrete wall /roof etc all as per site requirement including FRLS,PVC insulated and unsheathed cable with copper conductor cable of size 1.50 sqmm as earth conductor as per proper colour coding and pressed steel terminal boxes made out of 1.6 mm thick MS sheet with sink into the wall for mounting, 60mm deep covered including laminated sheet cover 3mm thick laminated hylam sheet fixed with cadmium plated screws/PVC gang box fully enclosed type for mounting switches,sockets,fan regulator, etc including making good the disturbed surfaces of walls and paint tuch up to match with the existing surfaces as per site requirement complete all as specified and as directed for the following :-

(a) One light point controlled by one switch

(b) One 3 pin 6 Amps socket point controlled by one switch on same board

(c) One 3 pin 6 Amps socket point controlled by one switch on independent board

(d) One ceiling fan point controlled by one switch and regulator

Description all as per Ser item No. 78 here-in-before but with 2.5 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 2.5 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and as directed.

S&F in replacement of switch piano flush type, single pole one way 6 Amps 240 volts complete all as specified and as directed.

S&F in replacement of switch socket combination 2 in 1, 3 pin 6 Amps, flush type, universal ,240 volts complete all as specified and as directed

S & F in replacement of switch socket combination 2 in 1, 3 pin , 6 Amps/16 Amps, flush type,universal,240 volts complete all as specified and as directed

S&F in replacement of stepped type electronic fan regulator 100 Watt, 240 Volt, 50 Hz 2 module size in 5 steps flush type complete all as specified and as directed.

S&F in replacement of ceiling rose 6 A, 3 plate,PVC/polycarbonate ,insulated body 240 Volt , 50 Hz complete all as specified and as directed..

M&L for submain wiring alongwith earth wire with 3 x 4.0 Sqmm FRLS PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including PVC Conduit / casing capping maintaning the colour coding as per electric rules and all required accessories of suitable size on wall/roof surfaces complete all as specified and as directed. NOTE :- Three runs of 4.0 Sqmm copper cable and one run of PVC conduit shall be measured as one unit length.

Description all as per Ser item No. 85 here-in-before but with 3 x 6.0 sqmm FRLS PVC insulated copper conductor cable complete all as specified and directed by Engineer-in-Charge. NOTE :- Three runs of 6.0 Sqmm copper cable and one run of PVC conduit/casing capping shall be measured as one unit length.

Description all as per Ser item No. 86 here-in-before but with 4 x 6.0 sqmm FRLS PVC insulated copper conductor cable and 1x 6.0 sqmm copper conductor cable for earth wire complete all as specified and directed by Engineer-in-Charge. NOTE :- Five runs of 6.0 Sqmm copper cable and one run of PVC conduit/casing capping shall be measured as one unit length.

Supply and fix distribution board double door type (for incoming MCCB & outgoing MCBs) TPN 8 way vertical type sheet steel powder painted with bus bar ,neutral link & earth bar etc. with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing cables/circuit wiring complete all as specified and directed by Engineer-in-Charge.

Supply and fix MCB distribution board double door type SPN 12 way sheet steel powder painted with bus bar ,neutral link & earth bar etc.with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing circuit complete all as specified and as directed.

Description all as per Ser item No. 89 above but of SPN 8 way complete all as specified and as directed.

S&F MCB Triple pole and Neutral (TPN) of capacity 40-100 Amps 415 volts ,breaking capacity 10 KA,'C' series ,fixed in proper position complete all as specified and as directed.

Supply and fix MCB, SPN, 40-63 Amps, 240 Volts complete all as specified and as directed.

Supply and fix MCB , SP, 6 - 32 Amps, 240 Volts complete all as specified and as directed.

Supply and fixing MCCB 25-100 Amp Three pole 415 Volt , breaking capacity, 16 KA, with fixed thermal & magnetic setting complete all as specified and as directed.

Supply & fixing wall mounted LED batten fittings extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 22W LED (4ft) complete with all accessories including connecting up with three core twisted flexible copper conductor cable with suitable size complete including taking down unserviceable fittings complete all as specified and as directed.

Fixing only tube light fittings of any type or capacity including all fixing accessories including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply & fixing wall mounted new E-Lite LED Triyca batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 10W LED 6500K (2ft) complete with all accessories including connecting up with three core twisted flexible copper conductor cable with suitable size complete including taking down unserviceable fittings complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers including all fixing accessories complete all as specified and as directed.

M&L for cutting round holes suitable for fixing exhaust fan of size 300 mm into or through stone walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required and plastering in CM 1:4 to external/ internal surfaces and finished to match with the existing surfaces complete all as specified and directed by Engineer-in-Charge.

Disconnecting and removing ceiling fan of any sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, including replacement of wornout/defective parts, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified and as directed.

Disconnecting and removing EXHAUST FAN of any sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of exhust fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified and as directed.

S & F in replacement of louvers with suitable frame work and fixing arrangements for exhaust fan of any size sweep complete including removing the existing unserviceable one complete all as specified and as directed.

Taking Down water heater (Electric Geyser) storage type of any make of 25 / 50 ltr capacity after disconnecting the existing electrical connection, water pipes and deposite to E/M store yard and and refixing in the original place/position duly connecting up water supply and electric supply etc.complete after repair of building complete all as specified and as directed.

S & F in replacement of PVC connection 15 mm dia 450 mm long with PTMT nuts on both sides for cold water connection complete all as specified and as directed.

S & F in replacement of PVC connection 15 mm dia 450 mm long with PTMT nuts on both sides for hot water connection complete all as specified and as directed.

Supply and fix in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and as directed.

M&L for GI Pipe Bracket made out of Galvanised Iron Tubing 40 mm bore (dia), light grade, 1.50 Metre long bent to shape as per specified for fixing Street Light Fitting including suitable size of clamps and applying Two coats of Aluminium Paint over a coat of Aluminium Primer including taking down old unserviceable GI Pipe Bracket with clamps, complete all as specified and as directed.

K LAKSHMAN SINGH AND CO

Thirumala Construction

SAI RUPA CONSTRUCTIONS

Vipin Kumar and Brother

Saiansh Associates

OM INFRA