PROVISIONING OF SHED AND MODIFICATION TO BLDG NO. P-406 (25 YARDS SMALL ARMS RANGE) AT AF STN FARIDABAD AND AOR OF GE (AF) FARIDABAD

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including floor finishes/tiling work and disposal of debris to outside the station where suitable for contractor complete all as specified and directed by Engineer-in-Charge.

Excavating in post holes each nexc 0.5cum getting out in hard and dence soil,ramming earth filling or broken rubble mixed with earth around in layers nexc 25cm watering and removing surfaces soil to a distance nexc 500m and making good surfaces complete all as specified and directed by Engineer-in-Charge

Excavation in trenches not exceeding 1.5m wide, not exceeding 10 Sq.m on plain area and not exceeding 1.5m deep and getting out in hard/dense soil for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc complete all as specified and directed by Engineer-in-Charge

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed by Engineer-in-Charge

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed by Engineer-in-Charge

S&F in repair solar studs, size 133 x 122 x75 mm, Direction two way acrylic prismatic reflective, reflection solar power LED (3No. Each side) colour yellow & red. Solar cell poly - crystalline silicon/single - crystalline silicon storage of battery super capacitor (50F), light of source super luminosity LED, Luminous mode varying type/contant type, Work of time more than 120 hrs for vaeying type and above 48 hourse for contant type (standard luminiosity intensity), work of circumstance 25 to +75 degree, material aluminium alloy and polycarbonate, IP rating IP68 resist compression 30 tons, service of life 5 year (super capacitor), view distance over 800m complete all as specified and directed by Engineer-in-Charge

M&L for PCC 1:3:6 type C2 (40mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge

M&L for brickwork using old size bricks Sub class B straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed by Engineer-in-Charge

Removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

M & L for vertical posts and Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge

S & F MS steel work in tubular trusses including special shaped washers etc., complete using but ERW or induction butt welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint complete all as specified and directed by Engineer-in-Charge

M & L mild steel plates (Plain or chequred) channel square cut or not chequred (ordinary and counter sunk) ferming holes, sithout any attachment for Fe-410-W Gde-E 250 quality 'A' complete all as specified and directed by Engineer-in-Charge

S&F mild steel screw bolts(Machine made) with hexagonal or square head at one end and screwed the other end n exc 5 cm long and diametre of neck exc 5 mm but n exc 10 mm dia complete all as specified and directed by Engineer-in-Charge

Mild steel framed work such as angles, flats, squre bars, grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; door frame, ladders and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed by Engineer-in-Charge

M&L for prepartion on new surface of steel & iron work of any description not specifically mentioned otherwise over 10 cm width or girth & applying two coat of synthetic enamal paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge

S&F Pre painted GalvaIume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

S&F Pre painted GalvaIume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in ridge of roof covering fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

S&F Mild steel sheet (01 mm thick) eaves guttersof 150 mm dia, galvanised class 3, half round with rounded edges fixed at shed or wall with suitable iron clamps etc complete all as specified and directed by Engineer-in-Charge

S&F Drop ends (for spigot or socket ends) or nozzles suitable to connect the gutter with 100 mm dia outlet pipe complete all as specified and directed by Engineer-in-Charge

S&F PVC(SWR) pipes, 110 mm external dia single socketed in any length with rubber joints, fixed to walls/ Shed poles with PVC brackets/clamps complete all as specified and directed by Engineer-in-Charge

Surface Excavation not exceeding 25 Cm deep and averaging 12 Cm deep and getting out in soft & loose soil complete all as specified and directed by Engineer-in-Charge

M & L 100mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregates in sub base complete all as specified and directed by Engineer-in-Charge

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade,with grey cement and pigment complete all as specified and directed by Engineer-in-Charge

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge

Demolition brick work or stone/boulder masonary,built in cement mortar or cement lime mortar including all quions, arches pillars,etc but ashlar facing dressed stone work and precast concrete articles and disposal of debris to outside the station where suitable for contractor complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and directed by Engineer-in-Charge

M&L for 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement with WPC @ of 3% of weight of cement complete all as specified and as directed by the Engineer-in-Charge.

Supply only Liquid Water Proofing Compound complete all as specified and directed by Engineer-in-Charge

M & L for spreading and leveling the fine sand at firing range complete all as specified and as directed by the Engineer-in-Charge

M & L for spreading and leveling the mixture of fine sand & saw dust in 1:1 ratio at firing range at a specific hight Approx 5 to 6 mtr hight from ground level with slope of 60 to 70 degree complete all as specified and directed by Engineer-in-Charge

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed by Engineer-in-Charge

M&L for complete removal of existing treatment on walls including preparing old plaster surfaces and applying two coats of cement based paint complete all as specified and directed by Engineer-in-Charge

M&L PCC in 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping including weathering round or chamfered and necessary form work required complete all as specified and directed by Engineer-in-Charge

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes, foundation for poles etc., and getting out in hard/dense soil complete all as specified and directed by Engineer-in-Charge

Returning, filling in, including spreading, levelling, watering and well ramming in not exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge

Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge

Supplying and laying un-reinforced precast concrete cable cover, class LV, Type 1 with peak, size 250 mm x 150mm x 40mm complete all as specified and directed by Engineer-in-Charge

Supply, lay, spread in trenches river sand including spreading, levelling, punning for cushioning of cable complete all as specified and directed by Engineer-in-Charge

S& fixing LED flood light luminarie 70 W having temperature color 6000 K ( Day light ) with high pressure die cast housing acting as heat sink in order to ensure better performance having IP66 ingress protection all as specified and as directed at site complete all as specified and directed by Engineer-in-Charge

S& fixing LED flood light luminarie 100 W having temperature color 6000 K ( Day light ) with high pressure die cast housing acting as heat sink in order to ensure better performance having IP66 ingress protection complete all as specified and directed by Engineer-in-Charge

S&F in replacement wall mounting box type LED tube light fitting , extruded aluminium heat sink provided for efficient heat dissipation & Integrated electronic driver 1x20 watt comprising of strong jointless CRCA body complete with all accessories complete all as specified and directed by Engineer-in-Charge

S&F LED high intensity focus light luminarie of capacity 70 W having temperature color 6000 K ( Day light ) with high pressure die cast housing acting as heat sink in order to ensure better performance having IP66 ingress protection complete all as specified and directed by Engineer-in-Charge

Supplying, laying and testing XLPE cable, insulated screened PVC bedded galvanised steel strip or wire armoured LT 1100 volts grade (Heavy Duty) with stranded aluminium conducotr of cross secional area 35 Sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge

Supplying, laying and testing XLPE cable, insulated screened PVC bedded galvanised steel strip or wire armoured LT 1100 volts grade (Heavy Duty) with stranded aluminium conducotr of cross secional area 6 Sqmm 4 core complete all as specified and directed by Engineer-in-Charge

M & L Pre cast cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate for pole pedestal (PCC) including necessary form work etc complete all as specified and directed by Engineer-in-Charge

Supply and fix non-metallic junction box/street light box with three phase aluminium bus bar of suilable for 415 Volt , 50 Hz electric supply conforming to IP65 wall / pedestral mounted and including MCB SP 06 Amps complete all as specified and directed by Engineer-in-Charge

Supply & fixing MCB SP 6 to 32 amps 230 Volt complete all as specified and directed by Engineer-in-Charge.

S/Fix MCB DB TPN 4 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar with provision of MCCB as incomer 240/430V for fixing of MCBs/Isolators/RCCBs etc complete all as specified and directed by Engineer-in-Charge

Supply and install in replacement MCCB TPN fixed type 63 Amps rated with breaking capacity 16 KA complete all as specified and directed by Engineer-in-Charge

B S ENTERPRISES

MAA BHAWANI CONSTRUCTION

Adhunik Builders