CONSTRUCTION of Teen Shed or Platform At Govind Nagar Panki Estith Valmiki Park

Earth work in excavation in foundation in ordinary soil up to 1.5 mtr lift & 30.0 mtr lead etc all complete.

Providing and laying cement concrete 8:4:1 [Stone ballast 8 (40mm normal size) : 4 sand : 1 cement] and curing etc all complete.

Providing & Laying cement concrete 1:1.5:3 with 20 mm nominal size aggregate in retaining walls,return walls,walls including attached pilasters,coloumns piers abutments pillars posts strust buttresses,string or lacing course parapets coping bed blocks anchor blocks plain window sills fillets sunken floor etc up to fillets sunken floor etc.excluding the cost of centering Shuttering and finishing

Providing & Laying cement concrete 1:1.5:3 with 20 mm nominal size aggregate in retaining walls,return walls,walls including attached pilasters,coloumns piers abutments pillars posts strust buttresses,string or lacing course parapets coping bed blocks anchor blocks plain window sills fillets sunken floor etc up to fillets sunken floor etc.excluding the cost of centering Shuttering and finishing.

MS or iron work in plain work such as reinforced concrete wrought to required shape as necessary including bending for proper completion of the work.As Per Analaysis

brick work With common Burnt Clay DSR 1:6…. Complete item

12 mm cement plaster with 1:4 cement & coarse sand mortor in two coats, backing coat 17mm and finishing coat 3mm thick of neat cement.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing and fixing foundation bolts including nuts & washer complete. ( DSR : 10.20)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (DSR : 12.50)