Spl repair/Renovation to certain Bldgs (Offrs Qtr) at Fort Cantt Allahabad.

Amount

Taking down chowkats or frames exceeding 1.5sq.m but not exceeding 4 sq.m each with shutters (without taking off shutters from the frames) including removing from site, complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5sq.m each with shutters (without taking off shutters from the frames) including removing from site, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store, removing rubbish off the premises, complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded in any mortar, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Taking up or down 15mm bore, steel tubing and connections, , including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 20mm bore, steel tubing and connections, , including cleaning for refixing or removal to store, complete all as specified and directed.

PVC connections 15mm size, of length 450mm, both ends having PTMT nuts, fixed in repair, complete all as specified and directed.

Glazed ceramic premium quality jointfree coloured tiles as in vertical surface of walls such as skirting / dado and risers to steps, size of tile shall be 450mm x 300mm x 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles, laid over and including provison of 10 mm thick rendering as in backing coat of tiles in cement mortar 1:4, complete all as specified and directed.

Granite, 18 to 20mm thick, (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.

Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc, complete all as specified and directed.

Stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed.

Fabrication only of modular kitchen with cabinet/ shelves & wardrobe/ cupboard made out of 18mm thick solid board with solvent adhesive at external faces including providing cabinet for keeping basket/ cutlery basket with handles/ door shutters all as specified and directed. Note : PVC solid sheet and fitting accessories shall measured and paid separately.

Supply only 18mm thick solid prelaminated one side prelaminated and one side plain (any shade) PVC sheet (celuka sheet) suitable for kitchen cabinet and modular kitchen racks complete all as specified and directed. Make: Rajshri plastiwood/ SYNTEX or commercially equivalent make in as approved by GE.

Supply only Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap 30mm, complete all as specified and directed.

Supply only Brass handle cast type, 125 mm size fixed with screw, complete all as specified and directed.

Supply only Ball catcher with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed.

Floor door stopper of brass body and tongue with hard drawn steel spring of cover plate length of 140 mm size, complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed.

Plaster of paris ceiling (Gypsum anhydrous) 10mm thick, to flat surface over and providing Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and applying two coat of oil bond distemper any shade in ceiling, complete all as specified and directed.

Second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and directed.

Complete removal of existing paint surface on wooden joinery by flame torch, cutting grinding of surface, removing all existing painted surface and repair the uneven or damaged surface by wood filler complete all as specified and directed.

French polishing (three coats) on new/ treated wooden surfaces of any description, width or girth including cleaning and preparing the surface, including a coat of wood filler on new works, complete all as specified and directed.

Factory made uPVC white colour Sliding window, three track area not exc 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm (+/- 0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+/- 0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame shall be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system]. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories, complete all as specified and directed. Note: The unit rate quoted shall exclude cost of glass and include all other connected accessories. Net Opening will be measured for payment purpose.

Sheet glass, 5.5 mm thick, ordinary quality and glazing with oil putty or moulded rubber gasket in square exc 0.5 sq. m in each pane, complete as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete as specified & directed.

Sheet glass, 4.0 mm thick, ordinary quality and glazing with oil putty or moulded rubber gasket in square n exc 0.5 sq. m in each pane, complete as specified & directed.

Toughned glass, 10mm thick, as in hinged doors, partitions, automatic doors, railing and similar work including cutting to shape, drilling holes, moulding and fixed with screw, rubber beadings as required, complete all as specified and directed.

Stainless steel drapery rod 30mm inner dia fancy type including curtain ring, brackets and fixed to wall, fixed in repair, complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and directed. MAKE:- Sintex / Rajshree plastic / Wood Forex, Indore

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

Second class hardwood 35mm thick factory made plain, framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both face.The size of rail and style as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated, complete all as specified and directed.

Glazed and skeleton shutters, 35mm thick, second class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), divided into squares with plain, chamfered or rounded mitered beads for securing glass/gauge complete all as specified in SSR Pt- I, section 8, clause 8.24(a) and as directed. Note: Glass or wire cloth, etc. in panels or sash squares shall be measured separately.

Door closer hydraulically regulated, Aluminium die cast, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, in repair, complete all as specified and directed.

Fixing only existing framed pannel shutter any thickness or any description, complete all as specified and directed.

Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11, 100mm size, ISI marked, complete all as specified and directed.

Extruded brass handles, fabricated type polished 150mm long, fixed to door shutter, complete all as specified and directed. .

Brass extruded type 150 mm long barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed, complete all as specified and directed.

Brass, sliding door bolt 300mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and directed.

Brass extruded type 150 mm long barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed, fixed in repair, complete all as specified and directed.

Extruded brass handles, fabricated type polished 150mm long, fixed to door shutter, fixed in repair, complete all as specified and directed.

Brass, sliding door bolt 300mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, fixed in repair, complete all as specified and directed.

Vitreous china white wash down couple closet of size 800mn x 365mm x 650mm including PVC soft seat cover white complete all as specified and directed. Make Jaquar Cat part no. ARS-WHT-0313 or equivalent in Prayag or Cera. .

Vitreous China wash basin, with full pedestal of size 830mm x 560mm x 480mm, white, flat back type, excluding tap but including brackets, fixed in repair, comnplete all as specified and directed. Make: Jaquar Cat Part No ARS-WHT-1509 or techno-commercially equivalent model in Prayag / Cera.

Central hole wash hand basin mixer without popup waste system with 450mm long copper pipes and brass nuts, fixed in repair, complete all as specified and dirceted. Make: Jaquar Cat Part No FLR 5169NB or techno-commerically equivalent model in Prayag / Cera or as approved by GE.

Shower rose with shower arm 20mm dia and 300mm long round shape with 900 bend for wall mounted showers with stainless steel flange, complete all as specified and directed. Make: Jaquar Cat Part No SHA-479L300S or techno-commerically equivalent model in Prayag / Cera or as approved by GE.

Towel ring 200mm dia, Chromium plated, fixed in repair, complete all as specified and directed. MAKE:- Jaquar Cat No. ACCN-1121BN or techno-commercially equivalent model in Prayag or Cera.

Towel rack 600mm long, CP, with bottom hook, fixed in repair, complete all as specified and directed. Make: Jaquar Cat Part No: CAN-1181FHN or techno-commercially equivalent model in Prayag or Cera.

Stop / Angle valve, 15mm dia, fancy type, CP, with long shank and cup (concealed type) etc, complete all as specified and directed. MAKE:- Jaquar Cat No. FLR-5053N or techno-commercially equivalent model in Prayag or Cera.

Toilet paper holder with stainless steel flap fixed to wall etc, fixed in repair, complete all as specified and directed. MAKE:- Jaquar Cat No. CAN-1153S or techno-commercially equivalent model in Prayag or Cera.

Soap dish, fancy type, CP, fixed in repair, complete all as specified and directed. MAKE:- Jaquar Cat No. 1131N techno-commercially equivalent model in Prayag or Cera.

Hand shower (Health faucet) with 8mm dia 1.20m long flexible tube and wall hook with NRV including fixing bracket, fixed in repair, complete all as specified and directed. MAKE:- Jaquar Cat No. ALD-577 or techno-commercially equivalent model in Prayag or Cera.

GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 15mm bore of pipe, complete all as specified and directed.

GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 20mm bore of pipe, complete all as specified and directed.

GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 15mm bore of pipe, complete all as specified and directed. [Except tubing]

GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 20mm bore of pipe, complete all as specified and directed. [Except tubing]

CP wall mixer 3 in 1 system with provision for both telephone shower and overhead complete with 15mm bore bend pipe and wall flange, fixed in repair, complete all as specified and directed. Make: Jaquar Cat part No FLR 5281N or techno-commerically equivalent model in Prayag / Cera as approved by GE.

CP grating, 100mm dia, fixed with coloured cement, joint to match the existing surface of tile, fixed in repair, complete all as specified and directed.

CP fancy type, bib cock, long body, half/ full turn including flange screwed down for iron pipe 15mm bore, fixed in repair, complete all as specified and directed.

PVC (SWR) 110 mm bore pipes single socketed ends, in any length with rubber ring joints, laid in trenches or in floors/ walls, in repair, complete all as specified and directed..

PVC (SWR) 75 mm bore pipes single socketed ends, in any length with rubber ring joints, laid in trenches or in floors/ walls, in repair, complete all as specified and directed..

PVC (SWR) bends / shoe of any radius and 110mm bore, complete all as specified and directed..

PVC (SWR) vent cowl, 110mm bore, complete all as specified and directed..

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed.

Kitchen sinks with drainage board made of stainless steel 1 mm thick in kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm, in repair, complete all as specified and directed.

Providing and fixing E-board Make: Everest, Design "Lake and Hill" of size 605mm x 605mm x 4mm thick white prelaminated set embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section (White powder coated). The framework shall comprise of main runner made from 0.33mm thick GS sheet and of size 24mm x 32mm x 300mm and secured at 1200mm maximum centres securely fixed to structural soffits with hangers of 2mm dia GI wire to be fixed with approved rawl plugs, adjusters and screws. Flush fitting of 1200mmm long cross Tee (with double stiching) to be interlocked between main runners at 600mm centre to form 1200mm x 1600 mm modules cross tee longer than 600mm to be supported independently. 600mm x 600mm doubles to be formed by fittings 600mm long cross tee centrally between the 1200mm cross tee. Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19mm x 19 mm and 300mm long of white colour all as per manufacturers instructions, fixed in reapir, complete all as specified and directed. Make of Frame work : Armstong or equivalent

Aluminum window/ CSW/ Ventilator (Sliding type) with aluminum anodized frame of aluminum section 62.5mm x 37mm x 1.5 mm thick including jointing cleats, glazing clips, rubber packing, aluminum snap beading, screws anodized aluminum fittings such as hinges, tower bolts, handles etc, including both side prelaminated aluminium board, fixed in repair, complete all as specified and directed.

Aluminum door with aluminum anodized frame of aluminum section 62.5mm x 37mm x 1.5 mm thick with shutters having styles & rails of aluminum section 47.62mm x 44.45mm x 1.5 mm thick including jointing cleats, glazing clips, rubber packing, aluminum snap beading, screws anodized aluminum fittings such as hinges, tower bolts, handles etc including 5.5 mm thick frosted glass and prelaminated particle board in lower portion, fixed in repair, complete all as specified and directed.

Aluminium anodised grill with mesh of specified shape and size fixed with beeds and stainless steel screws, in repair, complete all as specified and directed.

Vitrified exterior coloured flooring tiles of 300mm x 300 mm size, laid in floors with cement based adhesives, set and jointed as per manufacturer's instructions over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. Make: Orient Bell Ltd Cat Part No Checkers Teracotta (16513) or equivalent

Vitrified Ceramic tiles 9-10 mm thick, in light shade, area of each tile exceeding 0.42 sqm but not exceeding 1.0 sqm, as in floors/ walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. Make: Marbonite (Series-2) of M/s H&R Johnson Ltd or techno-commercially equivalent model in any make approved by GE.

Vitrified Ceramic tiles 9-10 mm thick, in coloured shade, area of each tile exceeding 0.42 sqm but not exceeding 1.0 sqm, as in floors/ walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. Make: Marbonite (Series-2) of M/s H&R Johnson Ltd or techno-commercially equivalent model in any make approved by GE.

Galvanised mild steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

Galvanised mild steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, fixed in repair, complete all as specified and directed.

Solid PVC Wall Lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, fixed in repair, complete all as specified & directed.

PVC sheet fillet 5mm thick of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing, complete all as specified and directed.

Demolition of cement oncrete (un reinforced) of any description and in any position not specifically provided, complete all as specified and directed.

Plain cement concrete 1:3:6 type C-2 (40mm graded stone aggregate), 75 mm thick, as in foundation filling, sub base and mass concrete etc, and finished the surface even and fair to recieve screed bed, complete all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation of 25mm thickness as in cushion, complete all as specified and directed.

Machine pressed precast concrete interlocking paver block any shape and size and any colour confirming to IS 15658-2006 of 80 mm thickness, M-40 grade with grey cement and pigment over sand cusioning and filling of gap by fine sand, complete all as specified and directed. Note : Sand cushioning to be paid separately under respective item.

Plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates and hold fasts making sides of concrete slightly rounded or chamfered, complete all as specified and directed.

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

Brickwork with flyash bricks, straight or curved on plan exceeding 6 metre mean radius, built in CM 1:6, complete all as specified and directed.

Brickwork with flyash bricks, straight or curved on plan to any radius in half brick walls, built in CM 1:4, complete all as specified and directed.

Taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water including removing of all rubbish off from the site, complete all as specified and directed.

Rendering 15mm thick in CM 1:4, mixed with water proofing compound @ 3.0 % by weight of cement, on brick work or concrete surfaces of walls, finishing the surface even and fair, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

Rendering 10mm thick, on faces of brick work or concrete surfaces in cement mortar 1:6, finished surface even and fair, complete all as specified and directed.

Preparation of newly plastered surfaces on walls and applying two coats of acrylic emulsion paint of approved colour/ shade over and including a coat of chalk whiting including preparation of surfaces and including 2mm thick wall care putty complete all as specified and directed.

Preparation of newly plastered surfaces including filling depressions of scrapped surfaces with BIRLA wall care putty (1 mm thick) and preparation of surfaces for further treatment and applying two coats of weather coat over and including one coat of ready made cement primer (in any colour or tint as approved) complete all as specified and directed.

Complete removal of old plastered surfaces on walls and applying two coats of acrylic emulsion paint of approved colour/ shade over and including a coat of chalk whiting including preparation of surfaces and including 2mm thick wall care putty complete all as specified and directed.

Preparation of old plastered surfaces including filling depressions of scrapped surfaces with BIRLA wall care putty (1 mm thick) and preparation of surfaces for further treatment and applying two coats of weather coat over and including one coat of ready made cement primer (in any colour or tint as approved) complete all as specified and directed.

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and directed.

Preparation of old ceiling surfaces and applying two coats of acrylic emulsion paint over a coat of primer, complete all as specified and directed.

Supply only integral water proofing compound, complete all as specified and directed.

Taking down carefully point wiring of any type and any description / caping or concealed [light point, fan point or socket point] including removal of battens, pipes, plug sockets, switches, shades, ceiling roses, light fittings etc complete and making good disturbed surface to match the exisitng, complete all as specified and directed.

Taking down main switches, distribution boards and cut outs of any capacity along with the exisitng boards and removing the same from site and making good disturbed surface or portion of walls complete all as specified & directed.

Point wiring (concealed) complete with PVC insulated unsheatehd, 1100 volts grade cable 1.5 sq.mm (nominal area) FR type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring, including provision of concealed pressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside and outside with two coats of black bituminous paint over and including a coat of red oxide primer, with 3.0 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc, including 1.5 sq.mm FR type PVC insulated unsheathed cable multi stranded copper conductor of green colour as continuous earth wire and connected to earth dolly as required at site and including chases cutting and making good the disturbed surface and applying finishes to match the existing surface, complete all as specified and directed for the following:-

(a) One light / fan / bell / exhaust fan point, controlled by one one-way 5Amp switch

(b) One 3 pin, 5 Amp socket outlet point on an independent board.

(c) One 3 pin, 5 Amp socket outlet on the same board with other switches

Point wiring complete with PVC insulated unsheatehd, 1100 volts grade cable 2.5 sq.mm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one 6 pin 15/16 Amps socket outlet on an independent board including provision of concealed opressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside and outside with two coats of black bituminous paint over and including a coat of red oxide primer, with 3.0 mm thick top cover of plastic lmainated sheet of required colour for mounting switch, sockets, fan regulator etc, including 2.5 sq.mm FRLS type PVC insulated unsheathed cable multi stranded copper conductor as continuous earth wire and connected to earth dolly as required at site and including chases cutting and making good the disturbed surface and applying finishes to match the existing surface, complete all as specified and directed.

Sub main wiring complete with 2 runs of 6 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of PVC rigid conduit 20mm dia and accessories for concealed wiring connecting terminal ends to DB's including providing 1 run of 6 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly including taking down existing sub main wiring any type and making good disturbed surfaces to match with existing including sinking of boxes , complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, one run of 6 sq.mm copper earth continuity conductor and one run of PVC rigid conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Sheet metal enclosure for MCB DBs SPN, 8 way, double door, vertical type, 240 V with 200 Amps rated bus bar, complete with incoming/ outgoing connection through proper size of lugs and cable glands, fixed in repair, complete all as specified and directed. Make: Legrand/ Schneider/ ABB/ L&T

MCB SPN 6-32 Amp, 240 volts 10 KA, 'B series' complete all as specified and directed. Make: Legrand/ Schneider/ ABB/ L&T

MCB SP 6-32 amps 230 Volts, 10 KA 'B series' complete all as specified and directed. Make: Legrand/ Schneider/ ABB/ L&T

Sheet metal enclosure for DBs TPN, 4 way, double door, vertical type, 415 V with 200 Amps rated bus bar, complete with incoming/ outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs, with provision of 3 pole and 4 pole MCCB as incomer and SP/TP MCB's as outgoing, fixed in repair, complete all as specified and directed. Make: Legrand/ Schneider/ ABB/ L&T

MCCB TPN 100 Amp, 415 V, 10 kA thermal release range,, fixed in repair, complete all as specified and directed. Make: Legrand/ Schneider/ ABB/ L&T

Exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers, including making hole in wall, complete all as specified and directed.

Exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers, including making hole in wall, complete all as specified and directed.

Lamp holder, PVC polycarbonate body with back plate suitable for batten fittings, complete all as specified and directed.

Modular switch 6 Amp, one-way, one module, 240V, fixed in repairs, complete all as specified and directed. Make : Legrand/C&S/Havells

Modular Bell push 6 Amp, one module, 240V, fixed in repairs complete all as specified and directed. Make : Legrand/C&S/Havells

Modular socket outlet, 3-pin, 6 Amp, flush type, 240V, fixed in repairs complete all as specified and directed. Make : Legrand/C&S/Havells

Modular switch 15 Amp, one-way, one module, 240V, flush type, fixed in repairs, complete all as specified and directed. Make : Legrand/C&S/Havells

Modular Socket outlet, 2 in 1, 3 pin, 15 Amps 240 Volts, flush type, fixed in repairs, complete all as specified and directed. Make : Legrand/C&S/Havells

Modular type Stepped type electronic fan regulator flush type duly fixed on the existing phenolic laminated sheet etc. as required, 240V, humming free, 2 module, ISI marked, fixed in repairs complete all as specified and directed. Make : Legrand/C&S/Havells

White modular cover plate with grid frames, 2-module, flush type, fixed in repairs, complete all as specified and directed. Make : Legrand/C&S/Havells

White modular cover plate with grid frames, 4-module, flush type, fixed in repairs, complete all as specified and directed. Make : Legrand/C&S/Havells

White modular cover plate with grid frames,6-module, flush type, fixed in repairs, complete all as specified and directed. Make : Legrand/C&S/Havells

White modular cover plate with grid frames, 8-module, flush type, fixed in repairs, complete all as specified and directed. Make : Legrand/C&S/Havells

LED lamp 9W, suitable for lamp holder, fixed in repairs, complete all as specified and directed. Make: Havells cat part no LHLDBWEB4D8R009 or equivalent model in Philips/ Crompton.

Recess mounted decorative LED downlight fittings of 6 Watt 6000K Lumen white powder coated pressed die cast aluminium housing with high efficiency reflector and spring mounting brackets 6500 K lumen efficiency, high brightness including suitable driver poly carbonate body, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with 23/.0076 flexible copper wire three core, fixed in repairs, complete all as specified & directed. Make : Havells Cat Part No EDGEPRORDDLR6WLED840S or techno-commercially equivalent model in Philips / Crompton / Bajaj as approved by GE

LED tube light fittings 1x20 watt four feet long decorative box type [Ultra slim] linear LED [6000K] with co-extruded polycorbonate body, envoirement friendly, energy efficient prewired and making conection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2mtr, fixed on wall firmly, fixed in repair, complete all as specified and directed.. Make : Havells E Lite Pride Plus Cat Part No LUMILINEPLUSBS20WLED865SPCSS or techno-commercially equivalent model in Philips/ Bajaj/ Crompton as approved by GE.

Aesthetically desigend LED mirror light fitting 1x10 watt LED 6500K, decorative, provided with high output PMMA diffuser for glare free light, with co-extruded polycarbonate body, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with 23/.0076 flexible three core copper wire or fixed to wall firmly, fixed in repairs, complete as specified & directed.

Wall mounting light fitting polycarbonate body, decorative type unbreakable suitable for upto 7.5 Watt LED lamp (Spiral B-22 base), complete all as specified and directed. Make: Havell's Cat Part No: FLORETINE WL 1LS B22 SS or equivalent of Philips/Crompton/Bajaj

Recess mounted decorative CRCA LED light fittings of size 2" x 2", 36 Watt LED 6500 K lumen efficiency, high brightness SMD leds, including suitable driver poly carbonate body, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with flexible copper wire, fixed in repairs, complete all as specified & directed. Make : Havells Cat Part No VENUSNEOHE2X2R36WLED840PIRSENSOR or techno-commercially equivalent model in Bajaj or Philips as approved by GE.

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 to 32 Amp, complete all as specified and directed.

Heavy duty inverter to self sustain UPS 24x7 HYBRID new model, including all accessories and making electrical connections with battery and testing complete all as specified and directed. Make: Microtek UPS 24x7 HB 1875 (24V)or techno-commercially equivalent model in Luminous or Su-Kam as approved by GE.

Inverter tubular battery 180 AH, standard range for normal usage, size of battery 535(L) x 215(W) x 480(H) including all the accessories, complete all as specified and directed. Make: Exide INVA MASTER IMTT-1800 or techno-commercially equivalent model in Amron or Luminous as approved by GE.

Supply, laying and testing XLPE cable insulated, screened, PVC beded galvanised steel strip or wire armoured, electric power cable (Heavy Duty) 1100 Volt grade with stranded aluminium conductor of 3.5 core 50 sq.mm, including taking down, complete all as specified and directed. NOTE:- Excavation, earth work, sand cushioning and brick protection work shall be measured and paid separately under respective items of this Schedule.

Supply, laying and testing XLPE cable insulated, screened, PVC beded galvanised steel strip or wire armoured, electric power cable (Heavy Duty) 1100 Volt grade with stranded aluminium conductor of 4.0 core 6 sq.mm, including taking down, complete all as specified and directed. NOTE:- Excavation, earth work, sand cushioning and brick protection work shall be measured and paid separately under respective items of this Schedule.

Excavation in trenches not exceeding 1.5m deep and not exceeding 1.5m wide or area not exceeding 10 sq.m on plan and depth not exceeding 1.5 m for foundation, for shafts, wells, cesspits, manholes, pier holes etc., and getting out in any type of soil, complete all as specified and directed.

Returning, filling in soils, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.

Spreading of natural, clean and dry river sand in trenches for cable cushioning, including punning the sand upto desired thicknes and consolidated, complete all as specified and directed. NOTE: Punned thickness shall only be measured and paid.

Supply and lay burnt clay bricks class 'B', modular bricks, laid in trenches for cable protection with length of brick equal to width of trench, complete all as specified and directed.

LED bollard light 8W cone NXG series, innovative design with uniformly lit diffuser at the upper portion acting as a beacon of path guidance in a landscape environment to be fixed on cement concrete in foundations filling or mass concrete and making electrical connection with copper cable, complete all as specified and directed. Make: Havells Cat Part No CONENXGBLS8WLED857PSYMTOPCM (1.0M) or techno-commercially equivalent model in Philips/ Bajaj/ Crompton as approved by GE.

Cable junction boxes IP-66 protected 'halogen free and weather proof' suitable for outdoor type (with metric knockouts for cable entry) of size 139mm x 119mm x 70mm including necessary suitable size terminal connector single phase with neutral system mounted on saddles of suitable length and provision of aluminium cable lugs for incoming and outgoing LT cable connections with junction box fitting clamps made of MS flat, nut and bolt on poles, complete all as specified and directed.

Decorative LED post top fitting for 360 degree indirect light of capacity of 15W with IP-65 protection, energy saving and resistant to impact and corrosion, glare free and better uniformity, complete all as specified and directed. Make: Havells model CORAL (OPAL) cat part no CORALMINIPT15WLED830PSYNTOPC or techno-commercially equivalent model in Philips/ Bajaj/ Crompton as approved by GE.

Heavy duty cable PVC insulated stranded aluminium conductor, 2 core 6 sqmm 1100 Volts, served with an inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers an drawn in and including medium grade non metallic rigid PVC conduit as per site requirement, flat or circular, complete all as specified and directed.

M/S A P CONSTRUCTION

KHALSA BUILDER

Channa Brothers and Co.

shweta constructions

creative construction co.

Mohit Enterprises

ms shanti sons