MAINT OF PERIMETER/EXTERNAL LIGHTING SYSTEM IN AKHNOOR MIL STN UNDER GE (S) AKHNOOR

Amount

Disconnecting and taking down the existing street light fittings from poles and gate light of any type or any wattage for cleaning by removing the dusts, insects from the inside of the light, repair/replacement and re- fixing the same complete all on the direction of Engineer-in-Charge all as specified and as directed. Note - Spare parts will be measured and paid for seperately.

Supply only electronic driver , as per existing sample suitable for street light fitting 30 Watt

Supply only PVC insulated and PVC sheathed copper flexible cable stranded of 1.5 sqmm twin core flat or circular with connection from light fittings to OH conductor or upto junction box all as directed

Supply only PVC insulated and PVC sheathed Aluminium flexible cable stranded of 6 sqmm twin core flat or circular with connection from light fittings to OH conductor or upto junction box all as directed

Supply and fix in replacement 1 x 45 Watt, LED street light fittings, powder coated pressure die cast aluminium compact High power with heat resistant toughened glass with lens, priple locked with built in short circuit protection, over load protection, and surge protection, High/low voltage cut off all as specified and as directed by EIC.

Supply and fix in replacement 1 x 60 Watt, LED street light fittings, powder coated pressure die cast aluminium compact High power with heat resistant toughened glass with lens, priple locked with built in short circuit protection, over load protection, and surge protection, High/low voltage cut off all as specified and as directed by EIC.

Supply and fix in replacement of 1 x 30 watt Circular or square LED Flood with innovative finless design and excellent thermal management and light distribution along with IP66 protection all as directed

Disconnecting and taking down the existing unserviceable post top lantern/ gate/ garden light fittings from gates/ poles of any type or any make for cleaning by removing the dusts, insects from the inside of compartment, repair/replacement of unsv spares and re- fixing the same complete all on the directed by Engr-in-Charge Note - (a) Spare parts will be measured and paid for seperately. (b) Necessary dismantling and new PCC work /touch up work if required to make existing surface as existing etc shall deemed to be included in the quoted rates.

Supply and fix in replacement of gate light / LED Post Top lantern moonlight effect and efficient light distribution with IP65 protection of capacity 40 watt mounted on existing Pipe 40/50 mm dia all as directed Make : Crompton, Philips and Havells

Supply and fix in replacement of Integral pole mounted decorative LED post top of capacity 25 watt with spherical shade polycarbonate diffuser and IP65 protection. All as directed Make : Bajaj , Havells & Philips

Supply and fix in replacement of LED Bollard light fittings 10 W IP65 protection with robust design and efficient light distribution complete including PCC foundation 30x30x30 cm all as directed .Make : Crompton/ Philips/Havells

Disconnecting and taking down the existing street light timer from poles of any type or any make for cleaning by removing the dusts, insects from the inside of compartment, repair/replacement of unsv spares and re- fixing the same complete all on the directed by Engr-in-Charge Note - Spare parts will be measured and paid for seperately.

Supply only Nature time switch, 230 V automatically switching ON/OFF as per seasonal changes single phase upto 5 KW capacity Make : Kakatiya/ Indoasian/Legrand

Supply only Time switch 3 phase with 48 hours back-up charge programmable and operated within 5 minutes of preset time of current rating 32 amps Make Schneider/Legrand/BCH

Supply only Power contractor TP 415 volts, 32 amps without aux relay suitable for operating of timer switch Make : L&T / C&S/ BCH

Supply only MCB SP 32 Amps 240 volts 10 KA all as directed.

Supply only MCB DP upto 40 Amps complete all as directed .

Supply and errection in repair and replacment of Prestressed concrete poles size 9 Mtr long 102 mm x 172 mm at top and 102 mm x 279 mm at bottoms class-10 including painting 5 Nos of strips in white and black colour 30 cm wide above PCC couping on ground level and numbering complete all as specified and as directed.

Supply and fix in repair and replacment switch fuse iron clad of sheet metal SP fused and neutral link 32 Amps 240 volts.

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,conected to and including galvanised iron earth wire 32 X 6 mm by means of nut, bolts, check nuts and washers of galvanised iron or steel and provision of charcoal dust and common salt packed all around the earth plate including necessary excavation and earth work in any type of soil and testing complete all as specified and directed and shown in electrical plate number 5 of MES SSR part-I(1991)

Dismantling and taking down deffective high mast light fittings with complete assembly by engaging suitable heavy duty crane/ Hydra machine from pole upto 20 mtr height using electrically operated winch, repairing and refixing after replacing all unserviceable parts including internal wiring complete all as specified and directed by Engineer-in-Charge. (Note : (a) Light fittings shall be measured and paid for separately. (b) Spares such as steel wire, winch motor, cable etc shall be measured and paid for separately. c) The entire work shall be carried out by well experienced professionals who has already carried out the high mast poles dismantling /repair works and similar works. d) Cost Minor fittings/fixtures such as screws, bolt/nuts, grease etc shall provided by the contractor without any extra cost to the Govt to make fucntional lights and nothing shall be admissible on this ground.

Supply only stainless steel rope twisted of size 10 mm dia with necessary connections proper binding on both sides from bottom drum to high mast top connection hook , complete all as specified and directed by Engineer-in-Charge.

Supply only fractional 1.5 HP motor 415 volts suitable for electrically operated high mast light, complete all as specified and directed by Engineer-in-Charge.

Supply only PVC insulated and PVC sheathed Aluminium flexible cable stranded of 4 sqmm twin core flat or circular with connection from light fittings to OH conductor or upto junction box all as directed

Supply only Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting along with connected accessories complete all as specified and directed Make :- Havells /Crompton or Philips.

Supply only Integral LED aviation light fittings Integral LED aviation light comprising of aluminium housing with polycarbonate enclosure Make : Bajaj/Crompton/ Havells/Philips

Supply only electronic LED driver for LED light fittings, capacity 45/ 50 Watt, 50Hz, complete all as specified and directed by Engineer-In-Charge. Make: Havells/ Crompton Greaves/ Bajaj/ Wipro/ Phillips/ Surya/ Bajaj/ C&S.

Supply only electronic LED driver for LED light fittings, capacity 60 Watt, 50Hz, complete all as specified and directed by Engineer-In-Charge. Make: Havells/ Crompton Greaves/ Bajaj/ Wipro/ Phillips/ Surya/ Bajaj/ C&S.

Supply and fixing in repalcement bracket made out of GI pipe 1.5 Mtr long, 40 mm dia light grade bent to shape as directed including clamps made out of 40 mm x 6 mm flat for fixing bracket suitable for PCC poles including nuts and bolts, washers and other connected items of required size including painting with one coat of aluminium paint over a coat of red oxide/primer all as specified and as directed.

Replacement of XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area of size 6 Sq mm, 2 core all as directed

Replacement of XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area of size 10 Sq mm, 2 core all as directed

M & L for XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area of size 16 Sq mm, 4 core all as directed

Replacement of XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area of size 25 Sq mm, 2 core all as directed

Replacement of XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area of size 35 Sq mm, 2 core all as directed

M & L for XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area of size 50 Sq mm, 3.5 core all as directed

Excavation in trenches in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable,erection of poles, stays, pipes etc and not exceeding 10sqm on plan and getting out all as directed.

Excavation in trenches, not exceeding 1.50 mtr wide and exceeding 1.50mtr but not exceeding 3.0mtrs in depth, not exceeding 10 Sqm on plan and getting out, in any type of soil, for laying electric cables or foundation of poles/ stays etc, complete all as specified and as directed by Engineer-In-Charge.

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm all as specified.

Removal of excavated material n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above in starting point.

Sand cushioning to protection of underground cables, laid 8 Cm before laying and 15 Cm after laying of cable, and punned to form an overall layer of 18 Cm thick, complete all as specified and directed by Engineer-In-Charge. Note: Punned thickness shall be measured.

Sub class ‘B’ bricks, modular size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning for mechanical protection of cable, with width equal to the length of the brick, complete all as specified and directed by Engineer-In-Charge.

M&L PCC 1:4:8 type D-2 using 40 mm graded aggrgate for filling in foundations of LT poles/garden light fittings all as directed.

M&L for providing cement concrete 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) for coping of poles including necessary form work and finished the surface complete all as specified and directed by Engr in charge.

Replacement of PVC junction box of size 200MMx2500MMx95MM mounted on GI pipe with MS clamp made out of 40 mm x 6 mm flat for fixing box on pole/wall including four poles terminal points mounted on epoxy insulator for cable connection with 01 No MCB SP 0-32 amp complete all as directed

Supply and fixing in replacement of GI pipe light grade of size 40 mm dia of any height mounted on PCC fdn at existing position all as directed by Engr-in-Charge

Earthing complete with galvanised iron earth plate electrode 600x600x6mm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected with 4.0mm dia GI wire as earth lead, by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 20mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1 (using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test point etc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, complete all as specified and as directed by Engineer-In-Charge. Note: Earth pit chamber and RCC pit cover shall be painted with two coats of red synthetic enamel paint over one coat of primer including preparing of surfaces.

Amount of Schedule of credit of for Rs 1,16,662.00 shall be deducted from quoted amount.

CHOPRA CONSTRUCTIONS (BID ID -3192373)

M/S DC CONSTRUCTIONS (BID ID -3192206)

Usha Engineering Co. (BID ID -3193546)

M/S Chib Engineers (BID ID -3191951)

M/S A K ENGINEERS & CO. (BID ID -3198234)

Dhani Builders (BID ID -3198271)

RAJINDER ELECTRICAL WORKS (BID ID -3198375)