Construction of plinth at various capacity distribution transformers under the jurisdiction of EUDD-I, Firozabad.

Construction / Repairing of plinth of size 5’x6’x5’ at various places under the jurisdiction of EUDD-I, Firozabad. The size of plinth shall be of 4’ above the ground level. At the bottom there shall be brick ballast pad of size 5x6’x3” thick in ratio 1:3:6 [Cement, sand and brick ballast]. The first class brick wall work shall be 9” thick in ratio 1:4 [Cement and sand]. The hollow portion among the wall shall be filled up with the brick ballast properly hammered and rammered as per direction of supervising engineer. On the top of the wall there shall be mesh of 12 mm thick iron rod at distance of 9’’ and RCC work in ratio 1:3:6 [Cement, Sand and grit stone] There shall be plastering all over the plinth 12 mm thick in ratio 1:4 [Cement and sand] above the ground level. Proper watering and curing of the plinth shall be carried out as per direction of supervising engineer., and also including the cost of arrangement of labourer, T&P etc required for proper completion of work. 1A- Job work includes all associated works like shifting and Re-placement of the distribution transformer required during construction of plinth.

Repairing less than 50%

Repairing above 50%

ABG ENGINEERS

M/S BALAJI ELECTRICAL & CONTRACTOR