Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.7 LAccepted-AOC VILL SAROT PALLY PO SANKRAIL DIST HOWRAH PIN 711313 WB | SANKRAIL | HOWRAH | WEST BENGAL | 711313 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹34.6 L+₹3.0 L (9.58%)Rejected-Finance 6A BANAMALI GHOSHAL LANE KOLKATA 700034 | KOLKATA | WEST BENGAL | 700034 | L2 | Rejected-Finance Being higher bid value | |
| 3 | L3₹34.7 L+₹3.2 L (10.1%)Rejected-Finance | L3 | Rejected-Finance Being higher bid value | |
| 4 | L4₹36.2 L+₹4.6 L (14.6%)Rejected-Finance | L4 | Rejected-Finance Being higher bid value | |
| 5 | L5₹39.4 L+₹7.8 L (24.8%)Rejected-Finance 0 GANGARAM DHARMKANTA TRUCK UNION JIROTA KALAN DAUSA DAUSA RAJASTHAN 303303 | DAUSA | RAJASTHAN | 303303 | L5 | Rejected-Finance Being higher bid value |
Tender Value
₹29.8 L
EMD Value
₹59,500
Closing Date
11 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ALIPORE KOLKATA
NO 1 NATIONAL LIBRARY AVENUE, ALIPORE, KOLKATA 700027
SPECIAL REPAIR WORKS OF SEWAGE LINE OF COOK HOUSE AND OR LIVING AREA AND REPLACEMENT OF WATER SUPPLY PIPES OF ALL BATHROOM AND TOILET OF EMB HQ KOLKATA, RENOVATION OF BARBER SHOP, WASHERMAN SHOP AND QM STORE BEHIND NO P-1 BLDG OF BSA, PROVN OF RETRAC
2023_MES_574974_1
GE/ALP (8148B) OF KOLKATA 2022-23
Open Tender
Civil Works
Item Rate
120 days
GE ALIPORE KOLKATA
Class D and category a (i)
9 documents required · 9 mandatory
₹500
GARRISON ENGINEER ALIPORE
₹59,500
Yes
GE ALIPORE
21 Feb 2023
14 Jan 2023
13 Feb 2023
14 Jan 2023
11 Feb 2023
28 Jan 2023
14 Jan 2023 - 21 Jan 2023
23 Jan 2023
Amount
Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Demolition of brick work built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed by the Engineer-in-Charge.
Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed.
Dismantiling of floor hearth or wall tiling incl cement mortar (but not backing), and rubbish off the premises (out side of MOD land), complete all as specified and as directed by Engineer-in-charge.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixingor removal to Store (measured overall as fixed along the centre line over fittings and accessories)
Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition and breaking up SGSW drain pipes including PCC bedding and haunching for 150 mm bore complete all as specified and as directed.
All as per item No 7 above but 200mm bore
Dismantling of 100 mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from wall or trenches, if required complete all as specified and directed.
Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal Complete all as specified and directed.
Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal Complete all as specified and directed.
Taking up or down 25mm steel tubing and connections, including cleaning for re-fixing or removal Complete all as specified and directed.
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre depth and getting out in soft / loose soil complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 metre wide and exceeding 1.5 metre depth and getting out in soft / loose soil complete all as specified and as directed.
Returning, filling in, of soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.
Removing exvated material to a distance n.exc 50M and deposited where directed at a level n. exc 1.5 M above the starting point complete all as specified and as directed.
Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of 150 mm bore of Pipe, including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.
All as per item No 17 above but for 200mm bore drain pipes
S&F for Reinforced concrete pipes 150mm bore, class NP2,laid and jointed complete with collars including testing complete all as specified and as directed.
All as per item No19 above but 200mm dia
M&L for brick work with sub class 'B' bricks built in cement mortar 1:4 straight or curved on plan exceeding 6 mtr mean radius and all as directed.
M&L for Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.
M&L for Rendering 15mm thick in CM (1:6) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
M&L for rendering 15 mm thick, set in cement mortatr (1:4), as on brick/concrete surface etc finish even and smooth without using extra cement complete all as directed.
Supply and fixing in repair for 75mm thick precast RCPC drain cover including frame having load bearing capacity of 2MT(conforming to IS12592) with embossing RCCP 2MT of size 600x450mm as per site reqirement complete all as specified and directed by the Engg in charge.
Supply and fixing in repair for 75mm thick precast RCPC drain cover including frame having load bearing capacity of 5MT(conforming to IS12592) with embossing RCCP 5MT of size 900x450mm as per site reqirement complete all as specified and directed by the Engg in charge.
Material and labour for providing precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in cover slabs (for manholes etc) and like set in cement mortar (1:4) including necessary formwork complete all as specified and as directed. Note: Reinforcement shall be measured and paid for separately.
Supply and fixing for 8 mm dia and over TMT bars, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Material and labour for Non-Skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and as directed by the Engr-in-Charge.
Material and labour for Glazed ceramic tiles of size 450x300x7-8mm thick in verticle surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed by the Engr-in-Charge.
M&L for cutting chases, pinning, in making good to facing where required of of brick wall and pointing in cement motrar 1:3 to ends and cutting chases for concealed water tubing and concealed conduit wiring ete and making good surfaces.
S&F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed .
S&F in repair 25mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed .
S&F in repair 15mm bore Brass CP bib cock fancy type with crutch or butterfly handle complete all as specified and as directed.
S&F in repair 15mm bore Brass CP stopcock concealed type fancy type,with crutch or butterfly handle complete all as specified and as directed.
S&F in repair 15mm bore Brass CP angular stopcock type with crutch or butterfly handle complete all as specified and as directed .
S&F in repair PVC connection 15 mm size pipe with PTMT nut of Length 600mm complete all as specified and as directed.
S&F in repair brass CP shower roses with or without swivel joints,with shower arm, 125mm size, including fixing to steel pipes or union complete all as specified and as directed.
S&F in repairs Vitreous China wash basin ( white), flat back, size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and as directed .
S&F in repair 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repair 32mm dia flexible PVC waste pipe for basin etc complete all as specified and as directed.
S&F in repair 32 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.
S&F in repair vitreous china squatting pan of orissa pattern long pan of size 580 mm x 440mm with integral foot rest white with cast iron p or s trap with back inlet including flush pipe of suitable length to connection with existing cistern & make good complete all as specified and as directed .
S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and as directed .
S&F for 75 mm diameter of outlet of PVC(SWR) floor trap,Plain with grating including jointing with solvent cement complete all as specified and as directed.
Supplying and laying for 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all fitting in any grade complete all as specified and directed
Supplying and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all fitting in any grade complete all as specified and directed
Supplying and laying for 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all fitting in any grade complete all as specified and directed
Material and labour for SGSW gully trap of size 150x150mm square or rounded mouthed type 'P' setting and jointing with existing pipe including making pit of size 300 x 300 x 300mm with necessary brick work and PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) complete all as specified and as directed.
S&F 100 mm bore cast iron soil, waste and vent pipes in any length with or without ears with cement joints laid in floors and walls complete all as specified and directed by the Engr-in-Charge.
S&F for CI bend 100 mm bore diminishing pieces or taper complete all as specified and directed by the Engr-in-Charge.
S&F cast iron branch pieces, double (equal or unequal), ordinary or inverted(spigot or socket type) or with parallel branches, bore of pipe 100mm.
S&F for cast iron cowls,bore of pipe 100mm complete all as specified and directed.
Supply and fixing as in repair 100 mm dia Cast Iron Tee complete all as specified and as directed.
M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in surface channel and drains including necessary formwork complete all as specified and as directed.
M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds,mi-tred/stopped ends etc complete all as specified and as directed.
All as per item No 57 above but add or deduct for each 25mm girth or part there of over or under 30cm
M&L for PCC type D-2 1:4:8 (using 40mm graded stone aggregate) as in foundations, filling mass concrete complete all as specfied and directed.
M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed by Engineer-in-charge.
M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement mortar bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling complete all as specified.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engr-in-Charge.
S&F 40mm bore CPVC pipe with fittings complete fixed in wall/laid in floor complete all as specified and as directed by engineer-in-charge.
M&L for 100mm thick PCC type D-2 1:4:8 using 40mm graded stone aggregate, as in sub base for floors, complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4 Type B-1 ( using 20 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed by Engineer-in-charge.
Supplying and fixing Mild Steel framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, railings and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed and design/shap approved by by Engineer-in-charge.
Material & labour preparation of new steel and iron surfaces of any description area exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide and zinc chrome primer, complete all as specified and as directed by Engineer-in-charge.
M&L for cement concrete ( 1:2:4) type B-1( using 20 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges,coping complete all as specified and as directed by Engineer-in-charge.
S&F 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints laid in trenches or in floor complete all as specified and as directed by Engineer-in-charge.
S&F 110mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed by Engineer-in-charge.
S&F 75mm bore PVC(SWR) pipe single socket in any length rubber ring joints laid in trenches or in floor complete all as specified and as directed by Engineer-in-charge.
S&F 75 mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed by Engineer-in-charge.
M&L for Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in in Soft loose soil
Material and labour for hard core of gauge n. exe 63 mm with broken stone deposited spread and levelled in layers n. exe 15 cm thick each layer and rammed to true surface complete all as specified and as directed by the Engr-in-Charge.
M&L for Machine pressed precast concrete coloured interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M 35 Grade complete all as specified and directed.
M&L for cement concrete chequered tiles 20mm thick and area of each tile not exc 0.16 sqm set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed
M&L for 20mm thick screed bed or bedding in cement mortatr (1:6) for laying of floor fishes complete all as specified and directed.
M&L for 50mm thick sand filling under interlock tile flooring complete all as specified and directed.
M&L for 100mm thick PCC 1:2:4 type B-2 (Using 40 mm graded stone aggregate) as in Path and hard standing including finishing cement concrete surface even and smooth without using extra cement complete all as specified & directed.
Taking down chowkhat or frames with shutter not exc. 1.5 Sqm each (without taking of shutters from the frames) complete all as specified and as directed by the Engr-in-Charge.
Taking down chowkat or frames with shutter exc. 1.5 Sqm but n.exc. 4 Sqm each (without taking of shutters from the frames) complete all as specified and as directed by the Engr-in-Charge.
Dismantling ceiling boards any thickness incl cover fillets complete all as specified and as directed by the Engr-in-Charge
M&L for Rendering 5mm thick with CM (1:3) on or concrete surfaces and finished the surface even and smooth as in ceiling complete all as specified and as directed by Engineer-in-charge.
Material and Labour for two coat of weather proof exterior emulsion paint on New surface or previously untreated surface of external walls including 3mm thick wall care putty on wall preparation to remove all foreign materials including necessary working platform complete all as specified and directed.
Material and Labour for complete removal of old surface and appliying two coat of weather proof exterior emulsion paint on old surface of external walls including 3mm thick wall care putty on wall preparation to remove all foreign materials including necessary working platform complete all as specified and directed.
M&L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer 3mm thick wall care putty on wall complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new plastered surface of ceiling and applying two coat of white wash on new surface etc, complete all as specified and as directed by Engineer-in-charge.
M&L for Double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles exceeding 0.36 sqm but not exc 1.00 sqm as in floor Screed bed or bedding layer 15 mm thick in cement mortar (1:6) etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over complete all as specified and directed .
M&L Glazed ceramic coloured wall tiles of size 450x300x6mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles .complete all as specified and as directed by Engineer-in-charge. (Note:- Screed bed shall be measured and paid Seperately under respective items of Sch "A').
S&F for Powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 80mmX25mmX1.55mm and shutter of section 20mm X20mm X1.55mm incl ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including taking down old steel windows with necessary all fittings complete all as per manufacturer's instructions and all as specified and as directed by the Engr-in-Charge.
S&F in repairs power coated aluminium door shutter including door frame fixed including roller machine with rubber gasket, stopper, cleats, handles etc complete incl aluminium door styles of size 80 mm x 38 mm x 2.00 mm and aluminium door section of top, bottom and lock rail shutter frame of 80 mm x 38mm x 3.00 mm taking down old door with necessary all fittingand all necessary fittinngs complete all as specified and as directed by the Engr-in-Charge.
S&F for 25mm curtain rods dicorative aluminium alloy with fixing brackets including taking down old pelmet box complete all as specified.
S&F for bracket dacorative type for curtain rods aluminium alloy complete all as specified.
S&F in repair for 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in cup board including all hardware fitting like hinge, handle, locking arrangement complete all as specified and as directed by Engineer-in-charge.
M&L for 2nd class softwood exc 6 to n.exc 13 Sqcm, Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads.
M&L for 4mm thick non asbestos cement false ceilling tiles of size 595 x 595 mm of approved design fixed with powder coated GI grid consisting of main Tee section of size (15mm x 30mm), cross Tee section of size (15mm x 23mm), and powder coating GI wall angle of size (20mm x 20mm) suitable for mounting tiles of 595 x595 mm with 2 mm dia GI wire suspended including fabrication complete as per manufacturers instructions fixed with steel rawl plug with nut and bolts arrengement with gred size 60 x 120 cm complete all as spd and directer by Enginer in charge.
S & F for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing etc, complete all as specified and directed
S & F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing etc, complete all as specified and directed.
Supply and fixing ceiling Pulley clothing line for Drying of clothes with following specifications:- (a) Pull it 5ft length with 04 Nos rod fixed to ceiling with necessary arrangements. (b) Pulley operated clothes drying system consisting of anodized Aluminium pipes, each of outer dia 22 mm and inner dia 19.8mm (c ) Pulleys made up of Delrin with rope guide mounted on channel pair of length 24(distance between two pipes in adjustable (d) Locking system to hide rope knot (e ) Channel to be mounted or fixed with self-tapping screws provided in kit. (f) Rope will be polyester braided undyed of 4mm dia. Accessories for Pull it Pulley System. (a) 31" L Angle: Made of 20 mm square MS pipe, powder coated with provision for fixing 4 pipes of pull-it system with 4 holes for mounting provided with mounting nails Make : M/s Easydry System Pvt Ltd or equivalent as approved by GE.
S&F for fluted panels of size 121mm x 9' with linear designs made of engineered composites with a natural wood finish while also being water resistance and termite and mould repellent including aluminium frame of size 2' x 1/2'' and all necessary arrangement complete all as specified and directed.
S&F for 12mm thick tuffen glass door of Size 1.30M x 2.40M with aluminium frame including all necessary arrangement like floor door spring ,stainless steel handle and locking arrangement complete all as specified and directed by the Engr-in-Charge.
S&F for mild steel flat iron of size 25x3 mm or equivalent as required for hold fasts and clamps & similar small articles confirming to Fe-410-O or Fe-310-O complete all as specified and as directed by the Engr-in-Charge.
M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in hold fast, bed plates, copings etc. including necessary formwork complete all as specified and as directed by the Engr-in-Charge.
S&F for Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engr-in-Charge.
S&F for 35mm thick factory made flush door shutters solid core construction with block board core and plywood face panels commercial type on both faces complete all as specified and as directed by Engr-in-Charge.
S&F for 100mm size stainless steel butt hinges medium weight, cold rolled complete all as specified and as directed by Engr-in-Charge.
S&F for 150mm long brass barrel tower bolts,with cast or sheet barrel and rolled or cast bolts complete all as specified and as directed by Engr-in-Charge.
S&F for 150mm long extruted brass handles,fabricated type polished complete all as specified and as directed.
S&F for 250mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of french polishing on sufaces including cleaning and preparating the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed by the Engr-in-Charge.
M&L for applying two coats of oil bound distemper over 3mm thick cement base wall care putty in two layer including preparation of new surfaces on wall complete all as specified and directed.
AUTO ELECTRICALS
SOVA ENTERPRISE
R.R.ENTERPRISE
Shanti Construction Company
KT CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .