Loading…
Loading…
Tender Value
₹39.6 L
EMD Value
₹4.0 L
Closing Date
29 Jun 2026, 5:00 pm4d left
Similar tender results from the same govt authority in the past 3 years.
Executive Office
Executive Officer Nagar Palika Parishad Bulandshah
3000WorkTender00003
2026_DOLBU_1162882_1
228 Date 22-06-2026
Open Tender
Civil Works
90 days
Executive Officer Nagar Palika Parishad Bulandshah
Please refer Tender documents.
2 documents required · 2 mandatory
₹4,720
Yes
Executive Officer Nagar Palika Parishad Bulandshah
₹4.0 L
Yes
23 Jun 2026
23 Jun 2026
30 Jun 2026
23 Jun 2026
29 Jun 2026
23 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Supply,Laying and Consolidation of 22.40-53 mm gauge stone Ballast | 1 | cum | 4,368 | ₹4,363.63 | 1 |
| 2 | Providing and applying Primer coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning of road surface and spraying primer @ 0.70 Kg/Sqm using mennual means. | - | sqm | 28.5 | - | 2 |
| 3 | Providing and applying tack coat on bituminious surface. @ 0.250 Kg/Sqm. bitumen of grade VG-10, Including heating the bitumen,spraying the bitumen with mechanical operated spray unit fitted on bitumen boiler, cleaning and preparing the the existing road surfce as per specifications | - | Sqm | 13.2 | - | 3 |
| 4 | Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge.50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity. | - | sqm | 10,743.8 | - | 4 |
| 5 | Providing and laying Bituminous concrete using crushed stone
aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in drum Type Hot Mix Plant of 60-90 TPH capacity. | 36.13 | cum | 12,235.2 | ₹4,42,057.78 | 5 |
| 6 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes. | - | sqm | 618 | - | 6 |
| 7 | Reflective Raised Pavement Markers (Cat Eye/Road Stud)
Supply and fixing of raised pavement marker with Made of Plastic body of RPM/ Road Stud shall be moulded from ASA (Acrylic Styrene Acrylonitrite) or HIPS (High-Imoact Polystyrene) or Acryloniitrite Butadien Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shall support a load of 13,635 kg tested in accordance with ASTM D4280.The Reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. Lenses shall be mouled of methyl methecrylate conforming to ASTM D788 of equivalent. The slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro -reflecting surface shall not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm. The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name , trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel , to the Engineer . In addition , a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. In case the markers are displaced , damaged , get worn out or lose their reflectivity compared to stipulated standards , the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer , at his own cost. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all
complete as per direction of the Engineer-in-Charge. | - | each | 324 | - | 7 |
| 8 | Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by various sizes including demolishing of R.C.C. work manually/ by various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. | - | each | 599 | - | 8 |
| 9 | Excevation work for of soil including inft upto 1.50 m and lead upto 30m | - | cum | 110 | - | 9 |
| 10 | First class B/w in 1:4 Cement C'sand mortor in Sub Structure including supply of all meterial labour t&P etc required for proper completion of work | - | cum | 5,170 | - | 10 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.34 MB
BOQ_2179813.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid