GE(S) BTD 41 OF 20-21 REPAIR MAINT OF WOODEN/STEEL FURNITURE ARTICLES AT BATHINDA MIL STN UNDER GE (S) BATHINDA

Amount

M&L to repairs Bed plywood top by replacing the following unserviceable parts with first class teakwood.Rest all as per drawings and directed by Engr-in-charge.(DRG NO. FD-246/247/213)

Long leg.

Short leg.

Long rail.

Short rail.

Stiffener.

Top of head rest.

Bottom of head rest.

Top of foot rest.

Bottom of foot rest.

Complete Head rest with 3.5 thick OSTF plywood.

3.5 thick teak face plywood, including half round teakwood beading if broken, of both side of head rest complete.

Complete foot rest with 3.5 thick OSTF plywood.

3.5 thick teak face plywood, including half round teakwood beading if broken, of both side of foot rest complete.

Plywood 12mm thick(9 ply) BWR Gde of suitable size in single piece.

M&L to repair Table Peg by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde).Rest all as per drawings and directed by engr-in-charge. (DRG NO. FD-384/277/236)

Top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing white lamination on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings and directed by Engr-in-charge.

Leg made out of first class teakwood.

Front rail made out of first class teakwood.

Side rail made out of first class teakwood.

Bottom rail made out of first class teakwood.

S&F PVC shoe 15mm dia of approved quality.

M&L to repair Teapoy by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde).Rest all as per drawings and directed by engr-in-charge. (DRG NO. FD-382/278/232/34)

Top made out of 18/19mm thick pre-laminated exterior grade MDF board OSL ( Designation PLMDF-11 ) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings and directed by Engr-in-charge.

Leg made out of first class teakwood.

Front rail made out of first class teakwood.

Side rail made out of first class teakwood.

Bottom rail made out of first class teakwood.

S&F PVC shoe 20mm dia of approved quality.

M&L to repair Table centre by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawings and directed by engr-in-charge. (DRG NO. FD-134/235/ 274)

Top made out of 18/19mm thick pre-laminated exterior grade MDF board OSL Designation-11 ) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings and directed by Engr-in-charge.

Leg made out of first class teakwood.

Front rail made out of first class teakwood.

Side rail made out of first class teakwood.

Bottom rail made out of first class teakwood.

S&F PVC shoe 20mm dia of approved quality.

M&L to repair Table 900mm x600mm without drawer by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde).Rest all as per drawings and directed by engr-in-charge. (DRG NO. FD-284/231/223/55/42(M))

Top made out of 18/19mm thick pre-laminated exterior grade MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge.

Leg made out of first class teakwood.

Front/rear rail made out of first class teakwood.

Side rail made out of first class teakwood.

Stiffener made out of first class teakwood.

S&F PVC shoe 20mm dia of approved quality.

M&L to repair Table 900mm x600mm with drawer by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawings and directed by engr-in-charge. (DRG NO. FD-283/224/41)

Top made out of 18/19mm thick pre-laminated exterior grade MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge.

Leg made out of first class teakwood.

Front/side rail made out of first class teakwood.

Stiffener made out of first class teakwood.

Back rail made out of first class teakwood.

Drawer complete excluding knob.

Front of drawer made out of 18/19mm thick prelaminated paticle board and 4mmx18mm teakwood beading complete excluding knob.

Bottom of drawer made out of plywood 6mm thick BWR Gde complete.

Side/back of drawer made out of 12 mm thick plywood BWR Gde complete.

S&F PVC shoe 20 mm dia of approved quality.

M&L to repair Table 900mm x900mm by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawing and directed. (DRG NO. FD-291)

Top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL ( Designation PLMDF-11 ) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish. Rest all as per the drawing and directed by Engr-in-charge.

Leg made out of first class teakwood.

Rail made out of first class teakwood.

S&F PVC shoe 25mm dia of approved quality.

M&L to repair Hat stand with mirror by replacing the following parts with approved ones. Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-233/361)

Plywood 4mm thick OSTF.

First class TW beading at all around of frame.

Mirror 5mm thick.

Brass peg 115-120mm long.

Aluminium nail hook 50mm long.

M&L to repair Table dinning (1200mm x900mm) by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawing and directed by engr-in-charge. (DRG NO. FD/MAP-II/03)

Top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11 ) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawing and directed by Engr-in-charge.

Leg made out of first class teakwood.

Front/rear rail made out of first class teakwood.

Side rail made out of first class teakwood.

Stiffener made out of first class teakwood.

S&F PVC shoe 25mm dia of approved quality.

M&L to repair Table dinning 6 person by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawings and directed by engr-in-charge. (DRG NO. FD-273/239/30(M)/FD/MAP-II/03)

Top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge.

Leg made out of first class teakwood.

Front rail made out of first class teakwood.

Side rail made out of first class teakwood.

Stiffener made out of first class teakwood.

S&F PVC shoe 25mm dia of approved quality.

M&L to repair Table dinning 8 person by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawings and directed by engr-in-charge. (DRG NO. FD-273/239/30(M))

Top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11 ) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge.

Leg made out of first class teakwood.

Front rail made out of first class teakwood.

Side rail made out of first class teakwood.

Stiffener made out of first class teakwood.

S&F PVC shoe 25mm dia of approved quality.

M&L to repair Table bed side by replacing the following parts with first class teakwood/ prelaminated particle board (exterior gde). Rest all as per drawings and directed by engr-in-charge. (DRG NO. FD-276/248/210)

Top made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL(Designation PLMDF-11) one side with approved shade and balancing white on other side duly provided teakwood beading infront of suitable size.

All as per item No. 12.01 above, but side complete.

All as per item No. 12.01 above, but bottom complete.

All as per item No. 12.01 above, but shelf 12mm thick complete..

Back ply 6mm thick BWR Gde complete.

M&L to repair Table dressing gents with mirror by replacing the following unserviceable parts with first class /teakwood/prelaminated MDF board (exterior gde)/plywood BWR gde.Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-230/31(M))

Top made out of 18/19mm thick pre-laminated MDF board exterior gde OSL (Designation PLMDF-11) one side with approved shade and balancing white on other side duly provided teakwood beading infront of suitable size.

All as per item no 13.01 but bottom complete.

All as per item no 13.01 but side complete.

Back ply of base made out of plywood 12mm thick( 9 ply) BWR gde complete.

Only Mirror 5mm thick of suitable size.

Back of mirror made out of plywood 6mm thick BWR Gde complete.

Drawer complete excluding knob.

Front of drawer made out of 18/19mm thick prelaminated paticle board and teakwood beading complete excluding knob.

Bottom of drawer made out of plywood 6mm thick BWR Gde complete.

Side/back of drawer made out of 12 mm thick (9ply) plywood BWR Gde complete.

M&L to repair Table dressing ladies with mirror by replacing the following unserviceable parts with first class teakwood/prelaminated MDF board (exterior gde)/plywood MR gde.Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-251/32(M))

Top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing white lamination on other side duly provided teakwood beading infront.

All as per item no 14.01 but bottom complete.

All as per item no 14.01 but side complete.

Back ply of base made out of plywood 12mm thick (9ply) BWR gde complete.

Only Mirror 5mm thick of suitable size.

Back of mirror made out of 6mm thick BWR Gde plywood.

Plain glass 5 mm thick for sliding.

Aluminium channel complete of suitable size for sliding of glass.

Drawer complete excluding knob.

Front of drawer made out of 18/19mm thick prelaminated paticle board and 4mmx18mm teakwood beading complete excluding knob.

Bottom of drawer made out of plywood 6mm thick BWR Gde complete.

Side/back of drawer made out of 12 mm thick (9ply) plywood BWR Gde complete.

Leg with frame made out of first class teakwood.

M&L to repair Side board by replacing the following items with teakwood /prelaminated MDF board (exterior gde)/ plywood BWR Gde.Rest all as per drawings and directed by Engineer-in-Charge. (DRG NO. FD-241/371)

Top made out of 18/19mm thick pre-laminated MDF board exterior grade OSL grade I, Type I, Designation PLMDF-11, one side with approved shade and balancing white lamination on other side duly provided first class teakwood beading infront of suitable size.

All as per item No 15.01 but bottom complete.

All as per item No 15.01 but side complete.

All as per item No 15.01 but partition complete.

All as per item No 15.01 but single shutter duly provided teakwood beading on edges complete excluding knob.

All as per item No 15.01 but shelf 12mm thick complete.

Back ply 6mm thick BWR gde complete.

Legs with complete frame made out from first class teak wood.

Drawer complete excluding knob.

Front of drawer made out of 18/19mm thick prelaminated particle board and 4mm x 18mm teakwood beading excluding knob.

Bottom of drawer made out of plywood 6mm thick BWR Gde complete.

Side/back of drawer made out of 12mm thick (9 ply) plywood BWR gde complete.

M&L to repair Bin linen multipurpose by replacing the following items with teakwood /prelaminated MDF board (exterior gde)/ plywood BWR gde. Rest all as per drawings and directed by Engineer-in-Charge. (DRG NO. FD/E6/MAP/09)

Top made out of 18/19mm thick pre-laminated MDF board exterior grade OSL grade I, Type I, Designation PLMDF-11, one side with approved shade and balancing white lamination on other side duly provided first class teakwood beading infront of suitable size.

All as per item No 16.01 but bottom complete.

All as per item No 16.01 but side complete.

All as per item No 16.01 but partition complete.

All as per item No 16.01 but single shutter (left) duly provided teakwood beading on edges complete excluding knob.

All as per item No 16.01 but single shutter (right) duly provided teakwood beading on edges complete excluding knob.

All as per item No 16.01 but shelf (left) complete.

All as per item No 16.01 but shelf (right) complete.

Back ply 12mm thick (9 ply) BWR gde.

Legs with complete frame made out from first class teak wood.

Drawer complete excluding handle.

Front of drawer made out of 18/19mm thick prelaminated MDF board and teakwood beading of suitable size excluding handle.

Bottom of drawer made out of 18/19mm thick prelaminated MDF board complete.

Side/back of drawer made out of 18/19mm thick prelaminated MDF board and PVC beading of suitable size.

CP handle 100mm long of approved quality.

M&L to repair Table writing by replacing the following unserviceable parts with first class teakwood/prelaminated MDF board (exterior gde)/plywood BWR gde.Rest all as per drawings and directed.(DRG NO. FD-275/249/33(M))

Top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing white lamination on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge.

Leg made out of first class teakwood complete.

All as per item no 17.02 but front rail complete.

All as per item no 17.02 but side rail complete.

All as per item no 17.02 but side stiffener complete.

All as per item no 17.02 but center stiffener complete.

All as per item no 17.01 but side of cabinet complete.

All as per item no 17.01 but bottom of cabinet complete.

All as per item no 17.01 but shutter of cabinet complete.

Back of cabinet made out of plywood 6mm thick BWR gde.

Shelf of cabinet made out of plywood 12 mm thick BWR gde complete.

Drawer complete excluding knob.

Front of drawer made out of 18/19mm thick prelaminated paticle board and 4mmx18mm teakwood beading complete excluding knob.

Bottom of drawer made out of plywood 6mm thick BWR Gde complete.

Side/back of drawer made out of 12 mm thick (9ply) plywood BWR Gde complete.

Brass lock of suitable size with duplicate key complete.

M&L to repair Sofa set 5/4 seater by replacing the following unserviceable parts with first class teakwood.Rest all as per drawings and directed by engr-in-charge. (DRG NO. FD-281/373)

Side rail.

Batton seat/back.

Front rail of single seater.

Front rail of three seater.

Back rest rail top/side of single.

Back rest rail side of three seater.

Back rest rail top of three seater.

Removing old foam cushion with tapestry cloth and S&F new P.U.Foam cushion of size 530mmx560mmx100mm (40 density) duly covered with approved quality of tapestry cloth.Make of foam cushion:- sleepwell/kurlon. Note:- Cost of tapestry cloth shall be between Rs 180/- to Rs 220/- per mtr.

Removing worn out tapestry cloth from old cushion and replacing the same with new tapestry cloth of approved quality. Note:- cost of tapestry cloth shall shall be between Rs 180/- to Rs 220/- per mtr.

Taking out carefully old existing Knob from side board, table dressing gents, table dressing ladies etc and S&F new decorative Knob 32mm dia of approved quality. Rest all as directed by Eng-in-charge.

Taking out u/s Bearer of suitable Size from different type of tables likes side board, table writing, table 900 x 600mm with drawer etc and S&F new Bearer of suitable size, made out of first class teakwood complete. Rest all as directed by Eng-in-charge.

M & L for preparation of old wooden polish from complete surfaces of Bed Hard FD- 246/247/213 Cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) adding colour (Raw siena/turkey amber) of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and directed by Engr-in-charge.

M & L for preparation of old wooden polish from complete surfaces of Table Peg FD- 384/277/236 Cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) adding colour (Raw siena/turkey amber) of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and directed by Engr-in-charge.

M & L for preparation of old wooden polish from complete surfaces of Teapoy FD- 382/278/232/34 Cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) adding colour (Raw siena/turkey amber) of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and directed by Engr-in-charge.

M & L for preparation of old wooden polish from complete surfaces of Table Centre FD- 134/235/ 274 Cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) adding colour (Raw siena/turkey amber) of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and directed by Engr-in-charge.

M & L for preparation of old wooden polish from complete surfaces of Table 900x600mm without drawer FD-284/231/223/55/42(M) Cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) adding colour (Raw siena/turkey amber) of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and directed by Engr-in-charge.

M & L for preparation of old wooden polish from complete surfaces of Table 900x600mm with drawer FD-283/224/41 Cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) adding colour (Raw siena/turkey amber) of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and directed by Engr-in-charge.

M & L for preparation of old wooden polish from complete surfaces of Table 900x900mm FD- 291 Cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) adding colour (Raw siena/turkey amber) of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and directed by Engr-in-charge.

M & L for preparation of old wooden polish from complete surfaces of Table 1200x900mm FD-FD/MAP-II/03 Cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) adding colour (Raw siena/turkey amber) of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and directed by Engr-in-charge.

M & L for preparation of old wooden polish from complete surfaces of Table dining 6 pers FD-273/239/30(M)/FD/MAP-II/03 Cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) adding colour (Raw siena/turkey amber) of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and directed by Engr-in-charge.

M & L for preparation of old wooden polish from complete surfaces of Table dining 8 pers FD- 273/239/30(M) Cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) adding colour (Raw siena/turkey amber) of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and directed by Engr-in-charge.

M & L for preparation of old wooden polish from complete surfaces of Table bed side FD- 276/248/210 Cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) adding colour (Raw siena/turkey amber) of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and directed by Engr-in-charge.

M & L for preparation of old wooden polish from complete surfaces of Hat stand with mirror FD-233/361 Cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) adding colour (Raw siena/turkey amber) of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and directed by Engr-in-charge.

M & L for preparation of old wooden polish from complete surfaces of Table dressing gents with mirror FD-230/31(M) Cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) adding colour (Raw siena/turkey amber) of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and directed by Engr-in-charge.

M & L for preparation of old wooden polish from complete surfaces of Table dressing ladies with mirror FD-251/32(M) Cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) adding colour (Raw siena/turkey amber) of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and directed by Engr-in-charge.

M & L for preparation of old wooden polish from complete surfaces of Side board FD- 241/371 Cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) adding colour (Raw siena/turkey amber) of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and directed by Engr-in-charge.

M & L for preparation of old wooden polish from complete surfaces of Bin linen multipurpose FD-FD/E6/MAP/09 Cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) adding colour (Raw siena/turkey amber) of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and directed by Engr-in-charge.

M & L for preparation of old wooden polish from complete surfaces of Table writing FD-275/249/33(M) Cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) adding colour (Raw siena/turkey amber) of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and directed by Engr-in-charge.

M & L for preparation of old wooden polish from complete surfaces of Sofa set 5 seater FD-281/373 Cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) adding colour (Raw siena/turkey amber) of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and directed by Engr-in-charge.

M & L for preparation of old wooden polish from complete surfaces of Sofa set 4 seater FD-281/373 Cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) adding colour (Raw siena/turkey amber) of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and directed by Engr-in-charge.

Preparation of old painted iron and steel surface (Externally & internally complete) of Almirah large steel/Almirah steel 1/2H 1/2shelf FD-1031/67(M)/FD/E6/MAP/18 by scraping & rubbing down with sand paper, removing dents & scratches, if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) of approved colour brush or by spray machine complete all as specified and directed by Engr-in-charge.

Preparation of old painted iron and steel surface (Externally & internally complete) of Almirah medium steel FD-1032/243/67(M) by scraping & rubbing down with sand paper, removing dents & scratches, if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) of approved colour by brush or by spray machine complete all as specified and directed by Engr-in-charge.

Preparation of old painted iron and steel surface (Externally & internally complete) of Locker steel FD-1029/257 by scraping & rubbing down with sand paper, removing dents & scratches, if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) of approved colour by brush or by spray machine complete all as specified and directed by Engr-in-charge.

Preparation of old painted iron and steel surface of Table 900x600x760 mm with drawer FD-1008 by scraping & rubbing down with sand paper, removing dents & scratches, if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) of approved colour by brush or by spray machine complete all as specified and directed by Engr-in-charge. Note - Wooden portion of table 900x600x760 shall be french polished with high gloss finish.

Preparation of old painted iron and steel surface (Externally & internally complete) of Table office Clk Steel FD-1004/381/307/84(M) by scraping & rubbing down with sand paper, removing dents & scratches, if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) of approved colour by brush or by spray machine complete all as specified and directed by Engr-in-charge. Note - Wooden portion of table Office Clk Steel shall be french polished with high gloss finish.

Preparation of old painted iron and steel surface (Externally & internally complete) of Table Office offr Steel FD-1002/1003/84(M) by scraping & rubbing down with sand paper, removing dents & scratches, if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) of approved colour by brush or by spray machine complete all as specified and directed by Engr-in-charge. Note - Wooden portion of table Office Offr Steel shall be french polished with high gloss finish.

Preparation of old painted iron and steel surface of Table bed side (MAP) FD/E6/MAP/15, FD/E6/MAP/15(R) by scraping & rubbing down with sand paper, removing dents & scratches, if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) of approved colour by brush or by spray machine complete all as specified and directed by Engr-in-charge. Note - Wooden portion of table bed side (MAP) shall be french polished with high gloss finish.

Preparation of old painted iron and steel surface (Externally & internally complete) of Bed Hard Steel (MAP) FD/E6/MAP/8, FD/E6/MAP/8(R) by scraping & rubbing down with sand paper, removing dents & scratches, if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) of approved colour by brush or by spray machine complete all as specified and directed by Engr-in-charge.

Preparation of old painted iron and steel surface of Table Computer FD/E6/MAP/03 by scraping & rubbing down with sand paper, removing dents & scratches, if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) of approved colour by brush or by spray machine complete all as specified and directed by Engr-in-charge. Note - Wooden portion of table Computer shall be french polished with high gloss finish.

M&L to repair Almirah steel large/Almirah steel 1/2H 1/2shelf by replacing the following unserviceable parts with approved ones.Rest all as per the drawings and directed by engr-in -charge. (DRG NO. FD-1031/ 67(M))/FD/E6/MAP/18)

MS lock 6 lever with duplicate key.

Stainless steel handle 150mm long.

Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.

Shelf made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.

Cover for locking device made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.

Pane glass 3.5/ 4mm thick of almirah glazed large steel.

Note:- Pattern and shape of lock and handle will be determined as per actual requirement at site.

M&L to repair Almirah medium/small steel by replacing the following unserviceable parts with approved ones.Rest all as per the drawings and directed by engr-in-charge.(DRG NO. FD-1032/243/67M))

MS lock 6 lever with duplicate key.

Stainless steel handle 150mm long.

Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer

Shelf made out of 1mm thick MS sheet duly painted with one coat of red oxide primer

Cover for locking device made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.

Pane glass 3.5/ 4mm thick of almirah small glazed steel.

Note:- Pattern and shape of lock and handle will be determined as per actual requirement at site.

M&L to repair Locker steel by replecing the following parts with approved ones.Rest all as per drawings and directed by engr-in-charge. (DRG NO. FD-257/1029)

MS cromium plated hasp and staple 75mm long.

MS cromium plated handle 100mm long.

Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer

MS hinges 75mm long.

M&L to repair Table steel with drawer (900mmx600mmx760mm) by replacing the following parts with approved ones as mentioned below and as per the drawing and directed by Engr-in-charge. (DRG NO. FD-1008 )

MS lock of suitable size with duplicate key.

Drawer made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.

PVC handle of approved quality suitable for drawer.

Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete.

Top made out of 18/19mm thick pre-laminated MDF board (exterior gde) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge.

S&F PVC/hard rubber toe of approved quality and suitable size.

M&L to repair Table 900mm x 600mm without drawer steel by replacing the top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish. Rest all as per the drawing and directed by Engr-in-charge. (DRG NO. FD-1007 )

Preparation of old surface of Table 900mmx600mm Without drawer steel by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) OG colour complete.Rest all as specified and directed.

S&F PVC/hard rubber toe of approved quality and suitable size.

M&L to repair Table 900mm x 900mm steel by replacing the top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish. Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-1009 )

Preparation of old surface of Table 900mmx900mm steel by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) OG colour complete.Rest all as specified and directed.

S&F PVC/hard rubber toe of approved quality and suitable size.

M&L to repair Teapoy verandah by replacing the top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish. Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-255 /208/ 35 )

Preparation of old surface of teapoy verandah by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) white colour complete. Rest all as specified and directed by Engr-in-charge. (DRG NO.FD-255 /208/ 35)

S&F PVC toe for teapoy verandah of approved quality and suitable size.

M&L to repair Teapoy verandah (MAP) by replacing the top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish. Rest all as per the drawing and directed by Engr-in-charge. (DRG NO.FD/E6/MAP/17 )

Preparation of old surface of teapoy verandah MAP by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) black colour complete. Rest all as specified and directed by Engr-in-charge. (DRG NO. FD/E6/MAP/17)

S&F PVC/Hard rubber toe for teapoy verandah (MAP) of approved quality and suitable size.

Spot welding on various items of steel furniture FD/TP

M&L to repair Table clerk (steel) by replacing the following parts with approved ones.Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-1004/381/307/84(M)).

MS lock of suitable size with duplicate key.

Drawer made out of 1mm thick MS sheet duly painted with one coat of red oxide primer

S&F PVC handle of approved quality suitable for drawer.

Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete.

Top made out of 18/19mm thick pre-laminated MDF board exterior gde ( Designation PLMDF 11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings and directed by Engr-in-charge.

S&F PVC/Hard rubber toe of suitable size.

M&L to repair Table officer (steel) by replacing the following parts with approved ones.Rest all as per drawings and directed by engr-in-charge. (DRG NO. FD-1003/84(M)).

MS lock of suitable size with duplicate key.

Drawer made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.

S&F PVC handle of approved quality suitable for drawer.

Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete.

Top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge.

S&F PVC/Hard rubber toe of suitable size.

M&L to repair Table bed side (MAP) by replacing the following parts with prelaminated MDF board(exterior gde)/plywood BWR gde. Rest all as per drawings and directed by engr-in-charge. (DRG NO. FD/E6/MAP/15, FD/E6/MAP/15(R))

Top made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL(Designation PLMDF-11) one side with approved shade and balancing white on other side duly provided with teakwood beading of suitable size.

Side made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL(Designation PLMDF-11) one side with approved shade and balancing white on other side complete.

Back made out of plywood 6mm thick BWR Gde.

All as per item no 60.03 but bottom complete.

Upper drawer complete excluding handle.

Lower drawer complete excluding handle.

CP Handle 100mm long of approved qulity.

S&F PVC/Hard rubber toe of suitable size.

M&L to repair Bed hard (MAP) by replacing the following unserviceable parts with approved ones.Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD/E6/MAP/08,FD/E6/MAP/08®)

Plywood 12mm(9 ply) thick BWR Gde.

Nut and bolt of suitable size complete.

Pre-laminated MDFboard(exterior gde) of Head rest complete.

Pre-laminated MDFboard(exterior gde) of foot rest complete.

S & F PVC/Hard rubber toe of suitable size.

M&L to repair Table computer by replcing the following parts with prelaminated exterior gde MDF board OSL (Designation PLMDF-11).Rest all as per the drawings and as directed by engr-in-charge. (DRG NO.FD/E6/MAP/03,TP)

Top made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing white on other side duly provided with teak wood beading 4x18/19 mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners.

Side made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing white on other side duly provided with teak wood beading 4x18/19 mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners , if any complete.

All as per item no 62.01 but Key board drawer complete.

All as per item no 62.01but mouse drawer complete excluding knob.

All as per item no 62.01 but middle shelf complete.

All as per item no 62.01 but bottom shelf complete.

Telescopic channel of suitable size and approved quality.

Note:- Sample and shade of materials will be determined as per actual requirement at site.

M&L to repair Table dining OR Steel by replacing the top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish. Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-165(M) )

Preparation of old surface of Table dining OR Steel by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) black colour complete.Rest all as specified and directed by Engr-in-charge.

S&F PVC/Hard rubber toe of approved quality and suitable size.

M/s MAKHAN ENTERPRISES

SUNIL TRADERS