Maintenance of Civil Carpentry and Plumbing Works at DEED complex and R-5 Shed, North Site, BARC, Trombay, Mumbai for the Year 2025-27.

Amount

Providing wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing, making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge. - Second class teak wood

Providing and fixing 35 mm thick flush door shutters conforming to IS : 2202 non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. woodscrews complete.

Extra over for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Commercial flush door shutters

Extra over for providing vision panel not exceeding 0.1 sqm in all type of flush door including fixing 4 mm clear glass with necessary teak wood beadings complete all as per specifications and as per drawings.

Providing and fixing C.P teak wood moulded beading (Architrave) of size 50 X 12 mm using 2nd class teak wood to door and window frames with necessary screws and painting with a coat of approved primer etc. complete

Supply of skilled manpower for carrying out various Plumbing maintenance works with necessary tools such as spanners, die of various diameters, pipe wrench etc. to attend pipe leakages at toilet, basin, urinalas, floor trap chock up, laying pipes, fixing of various plumbing fittings & fixtures and also carry out seasonable departmetal work, alloted by the Engineer-In-charge from time to time.

Providing and fixing 25 mm thick Colour PVC Integral Sheet door shutters flush door of approved colour, of approved make or equivalent, design, colour and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges, Fixing of Stoppers, tower bolts, baby latch, aldrop, handles etc.wherever required with S.S. screws (Stopper, Tower bolt, Baby latch, Aldrop, Handels etc Shall be supplied by department) etc. complete as per specifications and as directed by Engineer-in-charge. Note : The door should satisy the following technical parameters as under: 1. Density : 0.475 to 0.55 g/cc, 2. Hardness (Shore 'D'): min. 55, 3. Water absorption : max. 1 %, 4. Tensile strength : min. 13 MPa, 5. Elongation : min. 15 %, 6. Flextural Strength min. 30 MPa, 7. Compressive Strength at 10% Deformation : min. 3 MPa, 8. Vicat Softening Temperature: more than 75 Deg Celcius 9. Flammability: classification B : S3 : D0 (to be tested as per NF EN 13501-1 standard)

Providing and fixing IS:12817 marked stainless steel butt hinges of size 125 x 64 x 2.5 mm (heavy weight) of approved make with suitable stainless steel screws etc. including removing & re-fixing of existing door shutter complete as directed by the Engineer-in-charge

Providing and fixing aluminium aldrops of size 250 X 16 mm ISI marked anodised transparent or dyed to requried colour or shade with necessary screws, bolting from rear side complete as per specifications and as directed by the Engineer-in-charge

Providing and fixing anodised aluminium tower bolts of size 250 X 12 mm ISI marked of approved make, transparent or dyed to requried colour or shade with necessary screws etc.

Providing and fixing anodised aluminium baby latch of size 75 X 12 mm ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc.

Providing and fixing mortice latch and lock of approved make with 6 levers and a pair of handles Inside opening LEFT / Right with necessary screws etc complete suitable for fixing in wooden /steel/ FRP/ doors as per specifications.

Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer of approved make with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specificationsand as directed by the Engineer-in-charge.

Providing and fixing pair of stainless steel "C" type door handles 10 mm dia, 250 mm long SS 304 grade solid rod, of specified size in steel doors/ wooden doors including screws / bolts etc. all as per drawings and specifications complete.

Providing and fixing aluminium hanging heavy quality floor door stopper ISI marked with twin rubber stoppers, anodised transparent or dyed to required. colour or shade with necessary screws etc. complete.

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately).- Anodised Aluminium sections (Minimum anodizing thickness of 15 micron) NOTES : 1) The rates for aluminium is inclusive of all fastners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints. 3) A long M.S. rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for.

Extra for colour anodizing

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

With clear float glass panes of 4.00 mm thickness

With clear float glass panes of 5.00 mm thickness

With clear float glass panes of 6.00 mm thickness

Providing and fixing double action hydraulic floor spring of approved brand and manufacturer (conforming to relevant Indian Standard) for doors including cost of removing & re-fixing of existing door shutter, cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass/SS cover plate.

Providing and fixing 4 Lever Mortice Lock of approved make suitable for aluminium sections

Providing and fixing approved quality and shape locks cum handle of approved make for sliding shutters

Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters

Taking out doors, windlows and clear storey openings (steel / wood) shutter including stacking within 100 m lead (only shutters) Of area 3.00 Sq.M and below

Taking out doors, windlows and clear storey openings (steel / wood) shutter including stacking within 100 m lead (only shutters) Of area beyond 3.00 Sq.M

Making the opening in brick masonry for door / window / clear story opening including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface including disposal of mulba/rubbish to the nearest dumping ground.

Providng and fixing Aluminium Grill 10 mm thick in natural Silver anodising of min 15 Microns with a opening size of 80 mm x 66 mm and Minimum weight of 3.13 Kg/ Sq.M including providing and fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-Charge .Aluminium alloy shall be of 6063-T6 with Yield strength of minimum 6.5 kg/ sq.mm.

Extra for providing Aluminium Grill 10 mm thick with colour anodised by the manufacturer (Champagne, black, Bronze, Gold colours) complete all as per specifications and as directed at site by the Engineer-in-charge

Providing and fixing single point lock cum handle for aluminium openable windows/top hung shutters of approved equivalent quality and make complete all as per specifications and as directed by the Engineer-in-charge

Providing and painting TWO coats of synthetic enamel paint on new wooden surfaces of approved brand and manufacturer of required colour to give an even shade over an under coat of suitable shade primer of approved brand and manufacturer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and applying wall painting two coats on new work with premium plastic emulsion paint of approved brand to give an even shade, including a coat of approved cement primer, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge

Providing LOUVERED OPENING in door shutters including making the opening, providing & fixing teak wood louver blades with necessary teak wood framework & beading & applying one coat of approved wood primer etc. complete.

Removing carefully the existing damaged Aluminium frame / shutter with full size glass panel from its existing location without damaging any glass, Aluminium members, lock, floor spring etc. Resizing the same for smooth operation to make floor touch free including cutting the full size glass panel in two parts as directed, strengthening the aluminium shutter by providing & fixing 10 mm dia M.S. tie rods at both ends of the shutter, reshaping & refixing of existing board panel/glass sheet as required, re-erecting and repositioning the frame/shutter at the same place, re-fixing all fitting shch as pull/ push handle, hydraulic door clooser, floor springs, hinges, locking arrangement,tower bolt, replacing the existing damaged rubber gasket lining, aluminum cleats, clips with new ones etc. complete as required and as directed by the Engineer-in-charge. Note: 1. The contractor shall provide the sundry materials such as rubber gaskets, screws, MS tie rods etc. No extra payment will be made for it. 2. Door closer, lock, if required will be measured & paid separately under relevant item.

Providing and fixing stainless steel (SS 304 Grade) adjustable friction windows stays of approved quality with necessary stainless steel screws to the side hung windows as per specifications and as directed by the Engineer-in-charge - Size 255 X 19 mm

Providing and fixing mirror of superior glass of approved quality and of required shape and size with 6 mm thick Plain A.C sheet backing fixed to walls with consealed Brass C.P Mirror screws and consealed washers etc.complete all as per specifications and as directed by Enginner-in-Charge

Designing, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings.The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification (Aluminium frame work will be paid under relevant item)Note: ACMP shall be measured to the actual visible area of the ACP sheet including silicon joints as fixed on site

Filling the gap between aluminium frame & adjacent RCC / Brickwork / Stone work by providing weather silicon sealant of approved quality as per architectural drawings and directionof Engineer-in-charge complete Up to 5 mm depth and 5 mm width.

Providing and constructing Half brick masonry using bricks of approved quality/class, make/brand in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications and as directed by the Engineer-in-charge but excluding reinforcement up to 20 m height. (Reinforcement will be paid under relevant item)

Providing and constructing brick work in cement mortar using Standard bricks of approved quality / class, make / brand in super structure above plinth up to Floor-II level in all shapes and sizes including curing, raking out joints complete as per specifications and as directed by the Engineer-in-charge - Brick work in Super structure with standard bricks in C.M 1:6 Using crushed Sand

Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings.Steel supplied by the contractor. - Using TMT bars of specified grades all dia bars. TMT bars to be supplied by the contract confirming to IS: 1786(Latest edition) and BARC specification Note: 1)The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers and also testing third party from approved laboratories without any extra cost. 2) Binding wire required for the work will have to be supplied by the contractor at their own cost and will not be measured for payment. 3) Cover blocks shall be of same grade of concrete.

Providing 15 mm thick plastering using Readymix internal plastering compound of approved make for internal faces of brickwork /concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge

Providing and fixing Minimum 15-17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Telephonic Black colour for kitchen platforms, vanitiy counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels

Providing and fixing at all levels precast members using cement concrete of Grade M-30 in copings and / or bed blocks, plain window sills, shelves, louvers, steps, staircases, trench covers, drain covers etc. including hoisting and setting in position with C.M 1:3 (using crushed sand) cost of required centering, shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (using crushed sand) on exposed surfaces complete as per specifications and as directed by the Engineer-in-charge

Providing and fixing double Tubular scaffolding system using H- Frames or (cup lock type) on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding.

Lead charges for lead exceeding 2 Km but not exceeding 3 Km, by mechanical transport including loading, unloading, stacking/levelling etc.The rate in respect of this item is applicable for the NET Quantity arrived at after making deductions for voids @ 30% for debris & 20% in respect of soil from the corresponding STACK/TRUCK measurements

Debris

Supplying man power along with necessary pans, spades, shovels pickaxe, punjas, ropes, small special spade, raincoats, safety shoes, etc. minimum two number of labour per day upto maximum any number of labour as and when decided by Project Engineer to work for eight hours per day or monsoon period to carry out the cleaning of choked drains grating grills/hume pipes /footpath by removing the dry leaves, silt etc. and also carry out seasonable departmental work allotted by Project Engineer from time to time.

Providing, supplying and fixing Venetian Roller Blinds of approved make with all accessories and fabticating to required sizes etc as per approved design and approved Fabric complete all as directed by the Engineer in charge.

Removing the damaged PVC Flooring carefully including removing the resins sticking on the floor, cleaning the floor carefully stacking the serviceable materials at places shown and disposing the unserviceable materials within 50 m lead at places shown complete as directed by the Engineer-in-charge.

Providing and Fixing Homogeneous 2.00 mm thick PVC sheet / tile in flooring and skirting of approved make in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer including, levelling small undulations with plaster of paris if required, rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-charge in approved colour and shade

Carring out manual misc carpenrty work like minor repairs, fixing departmental fitting & fixures etc. as and when required and as directed by project engineer. Note: 1. Labour should carry necessary carpentry tools 2. The payment shall be made as per the log book duly approved by the Engineer In-charge - Skilled carpenter

Providing and fixing Lay in False Ceiling 600 x 600mm unperforated corrosion resistant aluminium magnesium alloy metal panel fixed in 24 mm 'T' Frame work of Module 600 x 600 mm. Panels shall be of approved make and size 575 mm x 575 mm and of approved colour in 0.70 mm thick Aluminium Alloy 3105 with square edges Tiles to be stove enamelled on a continuous application for pre-treatment. The coils to be go through 4 stages of pre treatment Three times of oven baked through conversion coating, priming and finish coat ensuring superior adhesion, high corrosion resistance and good colour stability.The coils to be painted on both sides after degreasing. Inside surface to have a primer of 5 microns and a coat of natural colour of 5 microns, exposed surface to have a primer of 5 microns, binder of 5 microns and a top coat of approved colour 15 microns. Grid system for fixing ceiling tiles shall comprise of tees. The 24 mm main tee runers shall be suspended at an interval of 1200 mm centre to centre. The 24 mm cross tee runner shall be suspended at an interval of 600 mm centre to centre and further supported with 24 mm cross tee with inter locking arrangements to form a Grid of 600 mm x 600 mm. The main tee shall be supported by means of 4 mm G.I.rod from slab / roof. The suspension shall be provided at 1200 to 1500 mm centre to centre.provision for lights, diffusers etc to be made including extra supports wherever necessary. Measurements shall be as per actual area of false ceiling with out deductions for lights and diffusers.

Providing and applying French spirit polishing for wooden sufaces with two coats on new works including a coat of wood filler to form a uniform neat finish as directed by the Engineer -in-charge and / or as per the specifications complete as directed by the Engieer-in-charge

Dismantling Plain Cement concrete manually / by mechanical means carefully with out damaging adjecent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge

Dismantling of RCC works carefully manually with out damaging adjecent structures excluding cutting of reinforcement including stacking of steel reinforcement bars and disposal of unserviceable materials within 200 m lead as per direction of Engineer-in-charge

Dismantling brick work in Cement mortar carefully with out damaging adjecent structures including stacking of materials and dispoal of unserviceable materials within 200 m lead as per direction of Engineer-in-charge.

Dismantling old plaster/skirting carefully, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead For thickness of tiles above 25 mm and up to 40 mm.

Removing/dismantling the sanitary appliances along with all connections, chiselling the embedded portions, screwing out all inter connections and proper plugging of the inlets and outlets to avoid leakages/water spilling etc.from all the floor level stacking the dismantled materials within 50 mtr. lead and as directed by Engineer-in-charge.

Dismantling Water closet, bowl type/flat back urinals with cisterns, Wash basin, flushing cistern of any size, sinks etc., including stacking of useful materials near the site and disposal of unserviceable materials within 200 m lead.

Existing GI/CI/PVC etc. pipelines along with all fixtures & resurfacing the surface if required with existing finish etc. complete as directed.

Shower, Bib tap, stop cock, piller tap, gate valve, ball cock, Nahani trap, bottle trap, urinal spreader, Flush cock.

Providing and laying in position cement concrete of 1:3:6 (1 cement, 3 coarse sand, 6 graded stone aggregate of maximum size 20 mm) including consolidation, finishing curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete.Up to PLINTH LEVEL.

Providing, centering, shuttering Form work using steel plates, planks for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings and specifications at all levels.

For Sub Structure

For Super Structure

Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge

Providing and Laying cement concrete 1:2:4 in Super structute (1 cement, 2 coarse sand, 4 Brick aggregates 20 mm to 40 mm) for filling Sunken floors of Toilet bath & kitchens admixed with proprietary water proofing compound confirming to IS 2645 and approved by Engineer-in-charge including scaffolding, consolidation, finishing curing etc.

Providing and fixing Cast Iron Nahani Trap / Floor Trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kgs each), jointing with Lead with the connection pipes, placing as per the drawings, embedding in Cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kgs / sq.cm pressure and fixing 1 No 125 mm dia C. P Brass Grating , complete all as specifications and drawings and as directed at site.

Providing and fixing square mouth S.W. gully trap grade 'A' complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design - 150 x 100 mm size Gully Trap "P" type.

Providing, Laying, jointing, fixing and testing Heavy quality (C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions nipples, reducers etc. as required for the work, including testing the pipes and fittings for 10.00Kg/Sq. Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting, threading, jointing with hempyarn, whitelead, jointing Teflontape, exposed/concealed by chasing walls and making good by filling with concrete1:3:6, complete all as per specifications and drawings, including two coats of anticorrosive bitumastic paint for all concealed lines /two coats of synthetic ename paint for all exposed lines all as directed by the Engineer-in-charge.

15 mm dia G.I pipe

20 mm dia G.I pipe

40 mm dia G.I pipe

50 mm dia G.I pipe

Providing, supplying, fixing in position, under floors or in walls Centrifugally cast iron pipes including required specials like bends, tees, 'Y' collers, cowl etc for Soil, waste and ventilation pipes Confirming to IS.3989 including cost of Jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes,painting with primer , fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site.

75 mm dia Centrifugally cast (spun) iron socketed pipe as per IS:3989 using 0.90 kg lead / joint or Cast Iron hubless pipes confirming to IS 15905

100 mm dia Centrifugally cast (spun) iron socketed pipe as per IS:3989 using 1.00 kg lead / joint or Cast Iron hubless pipes confirming to IS 15905

Providing & fixing in position heavy pattern screw down gun metal Gate Valve with handles and wheels conforming to IS:778 including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge.

Providing and fixing white vitreous china laboratory sink of size 530 x 430 x 180 mm with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass trap with C.P. brass unions complete including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever required complete as per specifications and as directed by the Engineer-in-Charge

Providing and fixing vitreous China washbasin of approved make and colour with C.I. brackets, 15mm C.P. brass pillar tap of approved make, 15mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge

White vitreous China wash basin size 630 x 4450 mm and equivalent sizes with single 15 mm C.P. brass pillar tap

Providing and fixing Heavy Quality CP Brass Bottle trap 31 / 32 mm of approved make single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal,of approved make for wash basins / urinal etc all as per specifications and directed by the Engineer in Charge.

Providing and fixing Heavy Quality 15mm C.P brass swan neck pillar cock of approved make as per specifications and as directed by the Engineer-in-charge.

Providing and fixing C.P brass bib cock of heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge

15 mm dia Bib cock of approved type and make .

Providing and fixing 15mm C.P brass pillar cock of heavy Quality of approved make and specied type as per specifications and as directed by the Engineer-in-charge.

Providing and fixing C.P Brass Angle cock of Heavy Quality of specified / approved make, for wash basin inlet / flush cistern etc. as per specifications and as directed by the Project Engineer (Samples to be got approved by the Project Engineer)

15 mm n.b CP Brass Angle cock of approved equivalent make and type

Providing and fixing PVC low level / high level flushing cistern 10 litre capacity of approved make in white colour with flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures etc. complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing PVC inlet connection pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15 mm dia 600 mm long

Providing and fixing Heavy Quality C.P .Brass waste coupling of following dia for wash basin and sink, of approved make, size and quality all as directed complete

C.P Brass Waste coupling 32 mm Dia of approved make Half threaded or Full threaded as per requirement.

Providing and fixing Heavy Quality Stainless Steel / C.P Brass Grating of approved make as specified for Floor traps / Nahani Traps all as directed

SS Grating 125 mm dia

Providing and fixing Brass 15mm C.P presstomatic series auto shut urinal flush cock of approved make and quality

Providing and fixing white vitreous china European type Water Closet with 'P' or 'S' Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing, commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge.

E.W.C. pan in White colour with ISI marked white solid plastic seat and lid.

Providing and fixing Indian water closet (Orissa pan) of approved make with 100 mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge.

White Vitreous china Orissa pattern W.C. pan of size 580 x 440 mm.

Providing and Fixing C.P. Brass towel rail 600 mm long of approved make with 30 mm CP brass screws with concealed fitting arrangement.

Providing and fixing white vitreous china flat back half stall urinal size 580 x 380 x 350 mm/610 mm of approved make with Push cock of approved make, with CP brass flush pipe unions, heavy quality C.P. brass spreaders, C.P waste coupling with dome grating, clamps complete all as per specifications drawings and as directed by the Engineer-in-charge

Providing and laying/fixing in position Minimum 15 mm thick double side machine polished granite slabs of size 75 x 50 cm or approved size and shape of approved colour & quality including machine/hand cut, polishing, buffing the edges all in line, level, (curvature corners if required) in cement mortar 1:3 with best workmanship, finishing, curing completefor Urinal partition in telephonic black shade by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase and finished smooth as per direction of Engineer-in-Charge.

Providing and fixing Vertical type, wall mounted, heavy duty stainless steel liquid soap dispenser of approved make (500 ml).

Providing and fixing Heavy Quality C.P Brass Health Faucet with 1.50 metres flexible hose (Hand Shower) of approved make with wall brackets or approved equivalent make and type as per specifications and as directed by the Project Engineer (Samples to be got approved by the Project Engineer)

Providing and Fixing CP brass 100 mm dia shower rose with Shower arm of Specified make as per specifications and as directed by Engineer-in-charge complete

Providing and fixing 1st quality ceramic glazed floor tiles of minimum 300-600 mm long and 300-600 mm wide and thickness not less than 6mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mmt hick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge.

Providing and fixing 1st quality ceramic glazed wall tiles confirming to IS 15622 of approved make in approved shade and colour of any size( 320x 480mm / 300x600mm/ 300x450mm and equivalent sizes) as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using coarse sand), setting the tiles in Cement slurry and pointing the joints with matching colour Tile grout compound of approved make of matching shade including using PVC Tile Trim in the exposed corners, complete as per drawings, patterns and specifications complete.

Providing and fixing Chlorinated PVC (CPVC) pipes having thermal stability for hot & cold water supply (as ASTM Standard 2846 & SDR - 11 Grade) including all CPVC Plain & Brass threaded fittings, fixing the pipe with clamps including chasing the walls, concealing the pipes and making good the same etc. This includeds jointing of pipes & fittings with CPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Project Engineer.

40 mm outer dia CPVC pipe (Concealed).

Raising of Inspection chambers of Internal size clear dimention of 900 x 600 mm/Circular manhole 0.9 m dia in 230 thick brick masonry with Cement mortar 1:4 Plastering of 20 mm thick cement mortar 1:4 on inside & out side and all exposed sufaces finished with a floating coat of neat cement, brick corbelling at top to provide opening of 900 X 450 mm/circular manhole 0.56m dia, Fixing of C.I Frame and cover with CC 1:2:4 concrete, and fixing Cast Iron Steps if necessary at 300mm intervals complete.(C.I steps will be paid separately under relevant item)

Taking out C.I cover with frame from R.C.C Top slab of inspection chambers of various sizes including demolishing of R.C.C work manually/by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 200 m lead as per direction of Engineer-in-Charge

Providing and constructing Inspection chambers of Internal size clear dimention of 900 x 600 mm in 230 thick brick masonry with Cement mortat 1:4 over a bed of 150 mm thick 1:4:8 cement concrete foundation, Plastering with cement mortar 1:4 & 20 mm thick on inside, out side and all exposed sufaces finished with a floating coat of neat cement, brick corbelling at top to provide opening of 900 X 450 mm, embedding the Frame and cover with CC 1:2:4 concrete, and fixing Cast Iron Steps if necessary at 300mm intervals complete. Depth of Chamber not exceeding 900 mm. (Excavation, Soling, Cast Iron Cover and C.I steps will be paid separately under relevant item)

Extra Depth over initial Depth of 900 mm for Chambers of 900 x 600 mm internal size.including fixing Cast Iron Steps (C.I steps shall be paid under relevant item)

Supplying and fixing Cast Iron Man hole or Cast Iron Steps cover of approved make of weight specified in the drawings or as directed by the Engineer in charge.

Dismantling roofing including ridges, valleys and gutter etc and stacking the material within 50 m lead

G.S Sheet / FRP Sheet / AC Sheet

Supplying, transporting, handling, storing the following heavy quality plumbing fittings/materials confirming to relevant IS specification all complete as per specification and as directed by Engineer-in-charge.

15 mm dia CP Brass Bib cock of approved type and make.

15 mm n.b. CP Brass Angle cock of approved make and type for inlet of wash basin / flush cistern etc.

Heavy Quality CP Brass Bottle trap 31 / 32 mm of approved make for wash basins / urinal etc.

Heavy Quality 32 mm Dia and CP Brass waste coupling for wash basin and sink of approved make, size and quality.

PVC inlet connection pipes heavy quality for hot and cold including CP brass unions and nuts 15 mm dia 450 mm long.

Tefflon tape (12 m length )

Supply of 31/32 dia PVC bottle trap

32 mm dia PVC flexible waste pipe

Black/white solid seat with lid of approved make including CP Brass / SS bolts, screws etc. for pedestal type W.C./Anglo Indian type.

Supplying, transporting, handling, storing the following heavy quality GI fitings conforming to relevant IS specification all complete as per specification and as directed by Engineer-in-charge - G.I. Union

15 mm dia

20 mm dia

25 mm dia

40 mm dia

50 mm dia

Supplying, transporting, handling, storing the following heavy quality GI fitings conforming to relevant IS specification all complete as per specification and as directed by Engineer-in-charge -G.I. elbow

15 mm dia

20 mm dia

25 mm dia

50 mm dia

Supplying, transporting, handling, storing the following heavy quality GI fitings conforming to relevant IS specification all complete as per specification and as directed by Engineer-in-charge - Reducer elbow

20 mm dia

25 mm dia

40 mm dia

50 mm dia

Supplying, transporting, handling, storing the following heavy quality GI fitings conforming to relevant IS specification all complete as per specification and as directed by Engineer-in-charge - G.I. Tee

15 mm dia

20 mm dia

25 mm dia

40 mm dia

50 mm dia

Supplying, transporting, handling, storing the following heavy quality GI fitings conforming to relevant IS specification all complete as per specification and as directed by Engineer-in-charge - G.I. socket

15 mm dia

20 mm dia

25 mm dia

50 mm dia

Supplying, transporting, handling, storing the following heavy quality GI fitings conforming to relevant IS specification all complete as per specification and as directed by Engineer-in-charge - G.I. Nipple 100 mm length

15 mm dia

20 mm dia

25 mm dia

50 mm dia

Providing and fixing brass ball cock of approved make heavy quality of following sizes with arm rod and Plastic Ball floats complete as per specifications and as directed by the Project Engineer.

20 mm dia

25 mm dia

40 mm dia

50 mm dia

Providing and fixing stainless steel movable hinged grab (confirming to grade SS 304, satin finish) consisting of 38 mm dia. 18 SWG stainless steel pipe duly bended in required shape and size, hinged with 3mm thick stainless steel rectangular sheet of required size having 6 nos. holes and u shaped stainless steel clamp for holding the grab bar including cutting, bending welding grinding, polishing and fixing with suitable sized and nos. of dash fasteners complete as required. All bends to be neatly finished miter joints complete etc. as required.

Providing and fixing stainless steel urinal grab bar/wash basin Grab bar (confirming to grade SS 304, satin finish) consisting of 38 mm dia. 18 SWG stainless steel pipe duly bended in required shape and size, hinged with 3mm thick stainless steel rectangular sheet of required size having 6 nos holes and u shaped stainless steel clamp for holding the grab bar including cutting, bending welding grinding, polishing and fixing with suitable sized and nos. of dash fasteners complete as required. All bends to be neatly finished miter joints complete etc. as required.

M/S A.M CONSTRUCTIONS (BID ID -3328798)