REPAIR TO FENCING , GATES, SECURITY WALL AND COMPOUND WALL ETC UNDER AGE (B/R) AT GE (U) E/M MEERUT CANTT

Amount

Dismantling post or struts ( wood steel, RCC ) any section including taking out embeded portion in concrete etc and making good disturbed ground.

Excavation in any type of soil as in post holes ( or similar holes) getting out and removing surplus soil to a distance n.exc 1.50 m making good disturbed portion of the surfaces, complete all as specified and directed.

M&L PCC 1:3:6 type D2 ( using 40mm graded crushed stone aggregate) as in foundation filling sub base and mass concrete all as specified.

Dismantling of Chain link fencing any type including necessary flat iron , round steel bars etc all as directed

Supply only Chain link MS galvanisd fencing of any dia wire, any mesh size made into mattresses laped wired laid in position all as specified and as directed by Engr in Charge.(Weight of per sqm of chainlink fence as determined by BOO shall be considered)

Fixing only chain link fencing including line wires, any mesh size and any type of standards rails straining bolts etc including provision of binding wire any size or type (weight n exc 4 Kg per Sqm metre) as directed by Engineer- in-Charge

M&L Steel screw bolt (machine made) with hexagonal or square head at one end and screwed other end to be fitted with with washeres and one hexagonal head nut 5 to 10mm dia and n,exc 10cm long, complete all as specified and directed.

M&L MS round bars 10mm dia and over cut to length bent to shape required cranking bending hooking and as required for link in chain link fencing, complete all as specified and directed.

S&F Hand rail, half round or other section or core for wooden hand rail straight portion drilled and countershunk for baluster,nosing to steps including embeding in concrete and screwing etc,wind ties for roof including screwing bolts,post and struts running bars for doors, post and strut in fencing including cutting top to shape as directed, drilling hole for wire etc, Flat iron fillet for wire mess and similar work, confirming to Fe-290 Grade E -165 , complete all as specified and directed.

S&F in repair galvanized two strand steel barded wire 2.24 mm dia barbed with 2mm dia barbs of 75mm specing and straining and fixing to any type of standard rails standing bolt including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc complete all as specified and directed ( Each line measured separately) , complete all as specified and directed.

Taking down cement plaster on brick or concrete or stone walls surface including racking out joints, hacking for keys, scrubbing down with water etc complete all as spd and directed.

Materials & labour for applying 15mm thick rendering using ready mix plaster bags on brick walls or concrete surface of finished even and fair as per manufactures instructions complete all as specified and directed. Make:-Ultratech rediplast,Birla Aerocon.

M&L for preparing new plastered surface of wall and applying two coat of cement base paint over a coat of primer etc all as specified and directed by Engr -in-Charge

M&L for preparing new plastered surface of wall and applying one coat of primer and two coat of weather proof exterior grade emulsion complete all as specified and directed

Demolition of brick work or stone/boulder masonry laid in cement mortar in any description as directed.

M&L for brick work with fly ash bricks straight or curved on plan to any radius built in CM 1:6 all as specified and directed by Engr -in-Charge

Ditto as per srl item 15 above but except brick.

Material and labour for greasing the steel rolliing shutter including opening top cover,removing spring etc and supply and fixing new spring, greasing the anchoring rod, refixing the top cover etc complete making the rolling shutter duly functional complete all as directed by Engr in charge(Area exceeding 4 Sqm and not exceeding 7.5 Sqm of each sutter), complete all as specified and directed.

Material and labour for greasing the steel rolliing shutter including opening top cover,removing spring etc and supply and fixing new spring, greasing the anchoring rod, refixing the top cover etc complete making the rolling shutter duly functional complete all as directed by Engr in harge(Area exceeding 8 Sqm and not exceeding 15 Sqm of each sutter), complete all as specified and directed.

Complete removal of existing treatment from walls , pillars and cornices washing, rubbing down and stopping of distempered and painted surfaces and cleaning the entire area(existing treatment may be of either white wash /colour wash /enamel paint) and making the wall surface smooth and applying two coat of cement based paint all as specified and directed

Complete removal of existing treatment from walls , pillars and cornices washing, rubbing down and stopping of distempered and painted surfaces and cleaning the entire area(existing treatment may be of either white wash /colour wash/ enamel paint) and making the wall surfaces smooth and applying one coat of primer and two coat of weather proof exterior grade emulsion complete all as specified and directed

Surface dressing n exe15 cm deep in any type of soil including cutting of vegitation or grass and up rooted tree upto 30cm in girth, shrubs, bushes and removing rubbish up to a distance of 500 mtrs out side the periphery of area and all as directed

Materials & Labour for preparation of new steel surface of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamels paints over a coat of red oxide primer all as specified.

Dismantaling of stone slabs and tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortor,complete all as specified and directed.

M&L for Granite (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and including 10mm thick backing coat in CM (1:4).complete all as specified and directed as approved shape

Dismantling of structural steel work including doors,gates but excluding framed truss etc, complete all as specified.

S&F framed work of rolled mild steel conforming to Gde Fe 410-0 or Fe 310-0 as in gates of angle or other section with gusset plates, rails, braces, etc, to be prepared for hanging with and including either hooks & hinges or steel hanging door fittings and hanging, fastening & fixing including drilling & welding complete, complete all as specified and directed.

Demolition of cement concrete of any description in ground floors and paving n exc exc 15 cm thickness,complete all as specified.

M&L coloured chequered cement concrete tiles 30X30X25 mmm thick jointed and pointed in neat cement slurry in with grey pigmenet and pigment over and including screed bed in cm 1:6 complete all as specified and directed . (Makes- "Tulip Infrastructure Saharanpur, Star tiles , Mehtab Tiles)

M & L for 75 mm thick PCC type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete, complete all as specified and directed.

M&L for coloured Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 grade concrete all as specified and directed. (Makes- "Tulip Infrastructure Saharanpur, Star tiles , Mehtab Tiles)

M & L for sand filling under floors or in foundations including watering & consolidation etc complete all as spd & directed

M&L cement concrete in roof kerbs or muds stops rounded or chamfered typeB1 1:2:4 ( 20 mm graded aggregate )

M&L preparation of old steel surfcae of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

S&F In repair punched tape concertina coil 1A specification in 500 mm dia entaglments and 150 mm pitch ( Weight not less than 2 kg per rm ) all as specified and directed

YADAV CONSTRUCTION COMPANY

Shikha Enterprises

AEGIS INTERNATIONAL

M/S AGARWAL CONSTRUCTION CO.

Rajneesh Jain