Construction of office building for AEE/O and M /Town/Namakkal and AE/O and M/Town/North at Namakkal 110 KV SS campus, Namakkal.

Amount

Clearing Juliflora jungle with uprooting as directed by the Engineer at site including lead, lift,etc.,complete.

Earth work excavating and depositing on bank with initial lead of 10m and initial lift of 2m in hard stiff clay,Stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders, as per standard specification, etc., complete.

Filling with river sand for filling the foundation and floor including sand, filling charges, with all leads and lifts, watering, consolidation etc., complete.

Plain cement concrete in CC 1:4:8, using 40mm HBG metal including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.

Plain cement concrete in CC 1:3:6, using 40mm HBG metal including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Column footing up to ground level and above GL including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Column upto GL and above GL including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Refilling the foundation and basement with excavated earth other than sand with all leads and lifts , watering, consolidation etc., complete as per standard specification and as per direction of the Engineer incharge.

Disposal of Excess of surplus earth away in low lying area with a lead of 100 Mts including spreading and levelling labour, lead, lift as per standard specification, etc., complete.

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Grade beam including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for plinth beams including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Providing anti-termite treatment over the plinth area of building (Foundation stage, flooring stage and outside of the building including cost of approved chemical, lead, lift, etc., complete as per standard specification.

Brick work in C.M. 1:5 using class II chamber burnt bricks for super structure including cost of cement, all materials, labour, curing, all leads and lifts, as per standard specification, etc., complete.

Ground floor

First floor

Brick work in C.M. 1:3 using class II chamber burnt bricks for partition walls and others including cost of cement, all materials, labour, curing, all leads and lifts, as per standard specification, etc., complete.

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Lintel beams including cost of cement, all materials, labour, curing, vibration charges, with shuttering, all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Ground floor

First floor

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for sill beams including cost of cement, all materials, labour, curing, vibration charges, without shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Ground floor

First floor

Reinforced cement concrete in C.C. 1:1 ½:3 mix using 12 to 20mm HBG machine crushed metal for Sunshade of 600 mm with 80 mm thick including cost of cement, all materials, labour, curing, including shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Ground floor

First floor

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Elevation Sunshade of 1000 mm with 100mm thick including cost of cement, all materials, labour, curing, including shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Lofts (75mm tk) including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Ground floor

First floor

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Roof slab of 125 mm thick including cost of cement, all materials, labour, curing, vibration charges, including shuttering all leads, lifts, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Roof slab of 100 mm thick including cost of cement, all materials, labour, curing, vibration charges, including shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Ground floor

First floor

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for septic tank cover slab of 100 mm thick including cost of cement, all materials, labour, curing, vibration charges, including shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Providing steel reinforcement MS/RTS rods up to 16 mm dia for reinforced concrete works, including cost of steel MS/RTS rods, binding wire, labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift as per standard specification, etc., complete.

Plastering with CM 1:5, 12 mm thick including cost of cement for Inner/Outer walls including labour, curing, all leads and lifts etc., complete as per standard specification.

Plastering with CM 1:3, 12 mm thick for Ceiling and Septic Tank including cost of cement, labour, curing, all leads and lifts etc., complete as per standard specification.

Weathering course with PCC 1:1.5:3 using 6 mm HBG stone over R.C.C. roof slab, for required depth of 50 mm for giving required slope and thickness to roof as required and laying one course of solar reflective tiles of 305 mm x 305 mm x 7mm thick using CM 1:3,and pointed with the white cement including cost of cement, all materials, labour, curing, all leads and lifts, etc., complete as per standard specification.

White washing two coats for ceiling using best quality of white cement including cost of all materials, labour, curing, all leads & lifts etc., complete, as per standard specification

Outer/Inner colour washing with two coats using ready mixed Exterior/ Interior Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of exterior/ Interior emulsion water based primer exterior /Interior surfaces with three coats of wall putty including through scrapping, clean removal of dirt, cost of all materials, scaffolding, Labour, Lead, Lift etc., complete as directed by the engineer at site.

Dadooing walls with first quality design ceramic tiles 305mmx 305mmx6mm of approved colour and make quality of ISI std, laid in CM 1:2, 10mm thick and pointing with colour cement using 0.40kg/m2 including finishing the joint and pointing flush with tile surface including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete as per standard specification. .

Supplying and laying of Double Charged Vitrified tiles of size 600X600X8mm approved quality and colour with ISI std and pointing with filling materials using 0.40kg/m2 including finishing the joint , and pointing flush with tilesurface including cost of all materials,lead, lift, labour, curing etc., complete as directed by the engineer at site.

PCC 1:4:8 mix using 40mm size hard broken stone for flooring 100mm thick and top plastering with C.M 1:3, 20mm thick including cost of all materials lead, lift, curing etc. complete.

Supplying and fixing solid core 35mm thick flush shutters with Teak ply on both side with teak wood lipping alround the shutter including cost of frame of size 100 X 75 mm including cost of all fixtures of standard size and specification, locking arrangements, painting 2 coats of enamel paint over one coat of primer and 2 coats of wood putty, transport charges, labour for fixing, lead, lift etc., complete as directed by the Engineer at site.

Supplying and fixing of Heavy duty PVC door with frame in the building including cost of all materials, lead, lift, transport, labour charges etc, complete as directed by Board Engineer at site.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm X 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allolw leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The windows should be got approved by the Executive Engineer before use on work.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm X 58mm and shutter profile size of 60X78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The Ventilator should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved by the Executive Engineer before use on work.

Fabricating,Supplying and fixing of structural steel for safety grills as per specification and one coat of red oxide primer and two coats of enamal paint including cost of steel and painting materials,lead,lift,labour charges as per standarad specification etc.,complete and as per instruction of Engineer at site.

Supplying and fixing white glazed earthen ware (Indian type) water closet of size 20" with flushing cistern of approved quality with 'P' and 'S' Trap embedded the closet with trap to shape in position with brick jelly concrete 32:12:5 using 40mm broken brick jelly finishing the top to required shape etc., including cost of all materials labour, lead ,lift, etc., complete, as per standard specification.

Supplying and fixing white glazed earthen ware (European type) water closet of size 20" with flushing cistern of approved quality with 'P' and 'S' Trap embedded the closet with trap to shape in position with brick jelly concrete 32:12:5 using 40mm broken brick jelly finishing the top to required shape etc., including cost of all materials labour, lead ,lift, etc., complete, as per standard specification.

Supplying and fixing in position of Wash Hand Basin of approved quality colour & size of 550X400mm with all accessories including cost of all materials, labour charges all leads and lifts etc, complete and as directed by Engineer site.

Supplying and fixing best quality of mirror of size 600x450mm mirror with SS soap tray, 600 mm SS towel rod, screw and fixing near the wash basin teak wood round block including cost of all materials, labour, lead, lift, etc., complete.

Providing PVC downfall rain water pipe of 110 mm dia of 6 kg /cm2 ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete

Supplying and fixing of 25 mm dia UPVC pipe 10 Kg/cm2 (Shell thickness 2 to 3 mm) for water supply line, including cost of pipe, bend, elbow, labour for cutting, threading, and fixing in position, testing all materials, solution, lead, lift etc., complete.

Supplying and fixing of 40 mm dia UPVC pipe 10 Kg/cm2 (Shell thickness 2 to 3 mm) of appd. Quality for water supply line from water sump and delivery line including cost of pipe, bend, elbow, labour for cutting, threading, and fixing in position, testing all materials, solution, lead, lift etc., complete.

Supplying and fixing of 25 mm dia GM ball valve appd. Quality for water supply line including labour, lead, lift and fixing in position etc., complete.

Supplying and fixing of 40 mm dia GM ball valve appd. Quality for water supply line including labour, lead, lift and fixing in position etc., complete.

Supplying & fixing of cuddapah slab polished on both sides for cup-Board, 20mm thick including all materials, lead, lift and fixing in position etc., complete.

Supplying Godrej Navthal lock ( 6 levers ) of approved good quality lock of reputed make including cost of all materials, labour, lead, lift, as per standard specification etc., complete.

Supplying and fixing of 1000 liters PVC water tank (white coated) of approved quality with ISI mark including cost of all materials labour for connection, lead, lift etc., complete as per standard specification.

Providing & fixing of 12mm screw down bib cock water supply tap including cost of pipe and labour fixing charges lead, lift, as per standard specification etc., complete

Providing and fixing ventilating shaft of PVC pipe 110 mm dia of 6 kg /cm2 ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete

Supplying and fixing of 110 mm dia PVC pipe for sewage line of 6 kg /cm2 ISI make including cost of bend,Tee, Elbow and shoe, cost of all materials, labour, lead, lift etc., complete as per standard specification.

Supplying and fixing of cast iron man hole cover of size 60 x 60 cm cover of heavy duty including cost of all materials, labour, all lead, lift, as per standard specification etc., complete.

Wiring with 2x2.50 sq.mm PVC insulated SC unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe in wall and ceiling with PVC accessories and with TW switch & 5A FT Switch box on wall with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light and fan point.

Wiring with 2x2.50 sq.mm PVC insulated SC unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x100mm x113mm T.W switch box for 5A 3pin non inter locking wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14SWG TC wire for open PVC plug point.

Wiring with 2x4.00 sq.mm.PVC insulated SC unsheathed copper conductor of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x100mm x113mm T.W switch box with 3mm thick Hylem sheet cover for 15A 3pin non inter locking CS plug with continuous earth wire connection of 14SWG TC wire open PVC plug point.

Supply and fixing industrial type tube light Model no.TMS/22/228 HF fitting with 1 x28 Watts T5 essential lamp set.

Supply and fixing the 45 W LED model no. BRP320, 1x24 LED -HP/CWPSCGR fitting with pipes , leads etc., Phillips make or equivalent type.

Supply and fixing of 1200 mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.

Supply and fixing of CFL bulk head fitting with guard (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for 11 W CFL lamp with CFL including cost of all materials, lead, lift, fixing charges etc., complete.

Supplying and fixing of ISI make 4 way triple pole and natural MCB Distn Board with 1 No. 32 Amps DPIC switch of 500V as incoming 6 Nos. 32 Amps SPMCB outgoing necessary hug with wall and making good of concealed portion with earthy etc., complete as per standard specification etc., complete.

Supplying and fixing of TNEB meter board for 32A single phase sevice connection with 32Amps fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375x300x19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the plank on wal with earth connection and inter connection with 7/20 PVC insulated copper wire from EB Meter to fuse unit using GI pipe 'B' class with appd quality including cost of all materials, labour, lead, lift etc. complete as per standard specification.

Filling 40 mm metal in dispersion trench including cost of all materials, filling charges with all leads, lifts etc., complete as per standard specification.

Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work.

Filling with well gravel for the foundation & basement, section office site with all leads and lifts , watering, consolidation etc., complete as per standard specification and as per direction of the Engineer incharge.

Providing steel gate using M.S steel angles, flats, square rods etc, including cost of all materials, fabrication charges, transportation and fixing etc complete as directed by the engineer incharge.

SGST For bidders within Tamilnadu

CGST For Bidders within Tamilnadu

IGST For Bidders outside of Tamilnadu

V.KARUPPIAH CONTRACTOR

vetrivel constructions

DHARIENEESH HOUSING DEVELOPERS

PV RAJU SONS

K Rajkumar

PERUMAL.S.K