Supply of equipment

Amount

Laboratory fumigator (fogger)

The body should be made up of SS with minimum 5 L storage tank

Should be autoclavable and protable

Should be suitable for fumigating area of minimum 8000 cu.ft.

Should generate aerosols of submicron size

Should have separate layers for dust and fog separation

Should work on power supply of 220 V AC and 50-60 Hz

Provision of official catalogue of the product, indicating make/model and product photograph is mandatory.

Vacuum Tray Dryer

It should have inner chamber of minimum 35cm x 35 cm x 35 cm size with three drying trays

Inner body should be made up of SS and outer side should be of powder coated MS

It should operate at temperature range of 50 to 130°C

Provided with digital vacuum guage with vacuum release valve

Provided with PID controller (microprocessor based)

Provision of official catalogue of the product, indicating make/model and product photograph is mandatory

Motor/Pump Set (1.5 HP) for irrigation

Electric mono block pump set of 1.5 HP Capacity

Should have BIS mark

Should have minimum of 35 m head range

Should be provided with compatible accessories including hose pipe of 1.25 (10m length), hose collar of 1.25" (2 nos.), hose clip of 1.25" (I nos.), G.I bend of 1.25" (1 no.), 1.25" GI coupler (1 no.) and foot valve made up of PP (1 no.)

Motor/Pump set (0.5 HP) for irrigation

Electric mono block pump set of 0.5 HP capacity

Should have BIS mark

Should have minimum head range of 15 m

Water lifting capacity of minimum 3,000 LPH

Should be provided with compatible accessories including hose pipe of 1 (10 m length), hose collar of 1" (3 nos.), hose clip of 1" (3 nos), GI bend of 1" (1no.) 1" GI coupler (1 No.) and 1" foot value made up of PP (1 No.)

Combi-Brush cutter/Grass Cutter with cultivator attachment

Brush cutter of 1.8 HP engine

Petrol operated unit (minimum 500 ml fuel tank capacity) with speed control facility

Should have straight shaft of SS of minimum 1.25 m long and bike styed handle

Should cut in diameter of 40 cm

Should have tool free change of attachments

Nylon feed head attachment with double lines (minimum 2 mm dia). & automatic line feed

Blade made up of High Carbon Steel

Provided with shoulder strap, blade cutter, protection glasses, tool kit and circular saw Cultivator attachment should have 6 tynes (2 Nos.) and one gear head

UNITECH ENGINEERING SERVICES

Alfa Instruments

Ruchi Enterprises