Pennathur/15th2424I/Mpp

Amount

Conducting Geo-Physical survey including conveyance the instrument etc., complete(As per Tward Seculd) ( DD 05.05.2023)

Drilling of 150mm dia vertical bore well upto the recommended depth etc., complete (Hard rock)

Supply and inserting of 150MM 200 MM Ksc PVC casing pipe etc., complete ( 200mm casing (Page No.6) 150mm ksc pipe casing pipe

150 mm ksc pipe casing pipe

200 mm ksc pipe casing pipe

Supply and delivery of MS Kiosk of size 0.75 x 0.45 x 0.75 for fixing of meter board, switch board with MS door and lock and key arrangements

Supply and delivery of Three-phase pump set with motor as per ISI 20 lpm x 75 head with out panel board consist of following.5HP Submersible Pump ( 5HP Pumpset) ( P No.156) Relay with ISI mark

Supply and delivery of Three-phase panel board with 2 level guard and auto start (5 HP Panel Board)

Supply and delivery of 50mm UPVC - Column pipe including all labour charges ( 1.30 PVC Coloumn pipe) WD- M0051)

Supply and delivery of PVC Insulated and Sheathed 3 core flat type 4 sq.mm copper cable conforming to IS 694/1990 (Tward page No. 124) WD- M 1975)

Supply and delivery of GI & PVC specials confirming to ISI Specifications 50mm MS clamp set WD- M0617

50mm MS Clampset WD M0617

150 mm bore cover

50mm GM Gate valve WD- M0619

50 mm GI flangh set (P No. 83)

50mm Elbow (P No. 83)

25mm GI service pipe (P No. 84)

7/18 copper wire for service connection

63 amps main switch (P No. 196)

Nylan rope (P No. 156)

90mm pvc pipe 6KT (P No. 146)

90mm pvc cuppling

90mm pvc Elbow (P No. 150)

90mm pvc Bend (P No. 153)

Erection of power pumps in borewell labour charges for erection of twin packer duplex type jet pumps in borewells upto 150 mm dia including fixing of Suction pipe regulating valves with jet assembly upto maximum depth of 30 m and delivery pipe valves pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter,Voltmeter, Ammeter, three indicator lamps capacitor and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumps and trail run for 10 days including signing of completion of reports as required by EB authorities and finishing the pipe holes including the foundation bolts, nuts and earth pits.

Internal wiring with copper insulated wire through conduct pipes, with necessary switches, distribution boxes with bulkhead fittings and bulbs.(Local)

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,(1000 litter)

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Plastering with cement mortar 1:5 (One part of Cement and Five part of M.Sand 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Paving the floor with design Ankiskirt Ceramic tiles (Colour and shade as directed) of size 305mmx305mmx6mm in all floors over a base layer of Cement mortar 1:3 (One part of cement and three part of M.Sand) 20mm thick laid In situ and pointed with same colour cement