PERIODICAL SERVICES WITH FLOORING PLASTERING, SANITARY, PLUMBING FITTINGS AND MISC B/R WORK IN ZONE B AND C AREA OF AGE B/R-I (CENTRAL) UNDER GE(CENTRAL) KHADKI

Amount

M & L for preparation of old plasterd or unplastered surfaces of wall/ceiling and applying one coat of oil bound destemper complete all as specified and directed

M & L for complete removal of existing treatment on wall surfaces of any description plasterd or unplastered surfaces of wall and applying two coat of oil bound destemper,including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed

M & L for complete removal of existing treatment on wall surfaces of any description plasterd or unplastered surfaces of ceiling and applying two coat of oil bound destemper,including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed

M&L for 3mm thick wall care putty on wall/ceiling complete all as specified and directed

M & L for preparation of old plastered or unplastered surfaces of wall and applying one coats of cement base paint complete all as specified Note;- (i) filling of cracks,holes etc are included in the rates (ii) Proper curing with water to be done before and after application of paint (iii) height upto 15 mtr

M & L for complete removal of existing treatment on wall surfaces of any description plastered or unplastered surfaces of wall and applying two coats of cement base paint including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed. Note;- (i) filling of cracks,holes etc are included in the rates (ii) Proper curing with water to be done before and after application of 1st coat.(iii) height upto 15 mtr

M&L for complete removal of existing treatment on wall surfaces of any description including brooming down with steel wire brushing, scrapping down smoke soot's , moulds, moss and efflorescence, salts, trading oil and greasy spots etc and applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint over a coat of weather proof primer including filling the cracks etc with crack filling upto 5 bars of positive hydrostatic pressure on vertical walls without any dilution with forced coverage not more than 3.5 Sqm / Ltr as per manufacture's instruction including primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSIAllow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed Make: (Apex Ultima Protek Asianpaints/ Nerolac excel top guard / Berger weathercoat long life 10 yrs.

M & L for complete removal of existing treatment and preparation of old plasterd surfaces of wall and applying two coats of wall dampness treatment as per manufacturer direction, and as specified and directed by Engr-in-Charge.(Make- Smart care damp proof, Advanced or equivalent as approved by GE) Note;- (i) filling of cracks,holes etc are includes in the rates.

M &L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applyinbg one coat of synthetic enamel paint any tint all as specified and directed.

M &L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of any tint all as specified and directed.

M &L for preparation of old painted plaster surfaces of wall of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of any tint all as specified and directed.

Clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, and trees not exceeding 30 cm girth (measured one metre above ground level) and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance except in the case of surface dressing which includes for all the foregoing except clearing away of trees

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of wall in CM 1:6,including taking down old cement plaster.complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm thick cemet plalster in CM 1:4 over wall / concrete surfaces finished even and smooth without using extra cement,including taking down old cement plaster, complete all as specified and directed by Engineer-in-Charge.

M&L for 5mm thick rendering on concrete surface of ceiling in CM 1:3 and rendering is to be finished even and smooth with out using extra cement,including taking down old cement plaster.complete all as specified and directed by Engineer-in-Charge.

M & L for WPT of external walls, chajjas and newly plaster surfaces by applying two coats of elastomeric coating material after cleaning the surfaces thoroughly and sealing all cracks with acrylic sealing compound as per the manufacturers specifications and directions of EIC, Make : Dr Fixit/Pidilite or equivalent complete all as specified and as directed.

M&L for sunken flooring treatment as per following details complete all as specified and directed:- (a) Special treatment to toilet floor by demolition of existing treatment of any description and thickness, removal of rubbish to a distance of 5KM to 7.5KM . (b) Clean the sunken portion of toilet / Bath / WC / Kitchen thoroughly to remove laitance, dirt dust, etc. (c) Form angle fillet of size 40mm x 40mm along the junction of wall and floor using polymer modified mortar ("Dr Fixit" Pidicrete URP" or equivalent as given in Appx). (d) Sanitary pipes entering through walls and floor shall be sealed with "Dr Fixit Bathseal Tape"or equivalent as given in Appx 'E' and the gaps to be grouted with non-shrink cementitous grout "Dr Fixit Bathseal Grout" or equivalent as given in Appx 'E'. Nahani traps, etc to be fitted securely and the gaps around it to be grouted in the same manner. (e) Apply one coat of a bituminious modified polymer coating "Dr Fixit Bathseal Plus" or equivalent as given in Appx 'E' on all angle fillets by brush.

M&L non skid coloured digital ceramic tiles 300x300/400x400 mm x 6 to 7mm thick,in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6,including dismantling, complete all as specified.

M&L non skid coloured digital ceramic tiles size of tiles 450x350/300x200/300x600x5 to 6mm thick vertical surface such as in skirting/dado etc over and including 10 mm thick cement plaster in CM 1:4,including dismantling, all as specified and directed.

M&L Glazed vitrified tiles 600x600/600x1200 mm 8 to 10 mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed in cement mortar (1:4),including dismantling,

M&L Glazed vitrified tiles 600x600/600x1200 mm 8 to 10 mm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar (1:3),including dismantling,

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over 15mm thick cement Screed base in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling,complete all as specified and directed.

S & F in repair water closet (Squat Pattern) complete including provn of lime concrete bedding Orissa pattern size 580 x 440mm white with integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor to match with existing complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixed as in repair, complete all as specified.

S & F in repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flushpipe, brackets all as specified and directed by EIC.

S&F in repair vitreous china wash basin white flat back size 580 x 450 mm including,pillar tap, 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets.

S & F in repair,15 mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors, including taking down, complete all as specified and directed by EIC.

S&F 3 layered rotational moulded polyethylene water storage tanks capacity 1000 ltr in white colour ( cylindrical vertical with closed top ) hoisted and fixed in position including dismantling and removing of old tank all as specified and directed.

S&F 3 layered rotational moulded polyethylene water storage tanks capacity 500 ltr in white colour ( cylindrical vertical with closed top ) hoisted and fixed in position including dismantling and removing of old tank all as specified and directed.

S & F in repair,110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints,including T, bend, Y,etc, laid in trenches or in floors

S&F in repair PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified.

S & F in repair bib taps cast copper alloy CP fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule 15mm bore dia all as specified and directed by EIC.

S & F in repair stop valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia all as specified and directed.

S&F in repairs PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as specified and directed.

S&F in repairs 32 mm bore PVC waste pipe 1000 mm long of approved make suitable for WHB, Urinals etc all as specified and directed.

S&F in repair stainless steel Soap dish, any type and size, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge.

S&F in repair Faucet cera Model-F 8030105AB (ABS),with 1 meter SS Braided connection pipe techno commercial equivalent complete all as specified and directed.

S&F in repair plastic water closet seat, white/black closet pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in Repair wall mixture three in one with complete accessories complete all as specified and directed .

S&F in Repair Toilet paper holder of fixed to walls with chromium plated (CP) brass screws complete all as specified and directed .

S&F in rep towel ring of CP fixed with and incl CP brass screws and wooden / plastic cleats (min wt 90 gms) for kitchen complete all as specified and directed .

S&F in rep Harrison rails, of anodised aluminium alloy with fixing brackets, stops, rollers etc.

S&F in repair,Pillar taps, cast copper alloy, fancy type,chromium plated,screwed down high pressure,with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

Disconnecting existing tanks n exc 500 litre capacity,setting aside ( or lowering if required ) for repairs,cleaning,etc. and hoisting if required reconnecting and refixing in position as same.

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm

S&F in repair cast copper alloy chromium plated shower rose fancy type fixed to 15 mm bore pipe all as sspecified.

S& F in repair 100 mm Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)

S & F in repair Plain fillets. square, rectangular in section exc 13 sqm but n exc 25 sqm,2nd class hardwood, clean sawn, secured with nails or brads in door frame, cupboard frame, kitchen cabinet frame etc

S&F 18/19 mm thick exterior grade Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, including,dismantling and all necessary fittings as in cupboard shutters,kitchen cabinet shutters complete all as specified and as directed by Engineer-in-Charge.

Resecuring or easing and adjusting without taking down of Shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and directed by Engr-in-Charge

S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with tinned tack of stainless steel wire staple or wooden beads as in door, windows/ventilators etc,all as spcified. .

S & F in repair 3 mm thick sheet glass ordinary quality, in squares n exc 0.5 sq. m each pane with putty/ beads including removing loose or decayed putty/ beads,and hacking out old glass in metal frame etc complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter wiuthout taking off shutter from the frame and removing from site.

Taking down chowkats and frame of doors/windows/ventilators n. exc 1.5 Sqm each including shutter wiuthout taking off shutter from the frame and removing from site.

Taking down Shutters of any description exc 1 sqm but n exc 2 sq. m each complete all as specified and as directed by Engr-in-charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitabe PVC sheet beading, and joined together with solvent cement, including,handle,hinges,tower bolt all necessary fittings,supplying & fixindg in the frame at site as per specifiction & drawing.

S & F Pressed steel door frame for doors of size 105 x 60mm with single rebate including necessary fixing lugs, hinges, lock strike plate, etc complete with and including hollow section of frame to be filled with PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) complete all as specified and as directed by Engineer-in-Charge.

S&F 35 mm Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S&F 30 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F aluminium anodised barrel tower bolt 200mm long of extruded section with steel screws complete all as specified and as directed.

S&F Mild steel pressed handles, oval type, stove enamelled black of size 150mm fixed with screws or welded complete all as specified and as directed by Engineer-in-Charge.

S & F Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge.

S & F 100 mm size stainless steel Light weight butt hinges for PVC door shutters and frames fixed with bright screwes complete all as specified and as directed by Engineer-in-Charge.

S & F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x 17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and as directed by Engineer-in-Charge.

S & F aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc making to the jambs complete all as specified and as directed by Engineer-in-Charge.

S & F for frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.

M&L Machine cut Kota stone slab 15-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, over and including 10 mm thick screed bed in cement mortar (1:6) as in flooring, kitchen platform, steps etc, including dismantling complete all as specified and as directed.

S.R.M.K Enterprises

SHAH BUILDERS

JP ENTERPRISES

M/s S.D Construction Co