SBM 2.0 - SWM 2022-2023 - Providing Windrow Pad with Roofing ( 2-MT) at Resource Recovery Park in Ammayanayakkanur Town Panchayat.

Amount

Providing Windrow Pad with Roofing

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 Mix (one part of cement, four part of M-sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with std. specifications.TNDSS NO 28 V, VI(S2) V, VI(S5A) VII

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.29mm height for plane surfaces in all floors with cross bracings using mild steel sheets of size 30cm x 55cm and 10 gauge stiffened welded with mild steel sheets of size 25mm x 25mm x 3mm for boarding and laid over silver oak (country wood). Joists of size 10cm x 6.5 cm dia spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre etc complete complying with standard specification TNDSS No. 30 &86

a)For Side wall

b)For Grade Beam

c)For Column

Reinforced Cement Concrete 1:1½:3 Mix (One part of cement, one and half part of M-sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications.(using vibrater)(TNDSS No.30 V,VI (S3) VII-3

Supplying fabricating and placing in position of TMT steel rods including cost of binding wire, cost of labour charges for fabrication and placing in position etc. Complete. Complying with std. specifications. TNDSS No,97 V,VI (S6) VII (S6) VII-3

Plain Cement Concrete 1:2:4 Mix (one part of cement, Two part of M-sand and Four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. TNDSS NO: 28 & VI (S2) VI (S5A) VII

Supply and fixing of M.S.Hollow sections for truss including cost of Material conveyance of all material, fabrication and fixing charges etc.Complete as per ISI with rust preventive primer & ready to assemble condition for easy installation at site including dismantling making necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. Complete as per Standard Specifications.,

Painting Two coats for new iron work over existing priming coat using departmental approved colour & quality of ready mixed synthetic enamel paint, including cost of all materials, all labore charges, etc., complete.

Roofing with best Quality of Galvalume sheets 0.47 mm thick including cost of ‘U’or ‘J’ bolts bitumen washers and cutting all sheets to required size of if found necessary during execution etc. complete including cost and conveyance of all materials and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers.TNBP No:49

Special ceiling Plastering in Cement Mortor 1:3 Mix (one part of Cement, Three Part of M-Sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications

Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A