Loading
Loading…
Loading…
Tender Value
₹24.7 Cr
EMD Value
₹49.5 L
Closing Date
1 Jun 2026, 3:00 pmClosed
Yes (up to 2 members)
Yes (up to 2 members)
Two Packet System
EPC [ Single Stage ]
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ELECTRICAL
13 conditions · 2 needing a document upload
As per RFP
As per RFP
38 conditions · 10 needing a document upload
Whether cost of earnest money deposited.
Whether cost of tender document deposited.
Whether valid electrical contractor license and valid supervisor license submitted.
Whether document related to technical eligibility submitted.
Whether document related to financial eligibility submitted.
Whether photocopy of Pan Card submitted.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Payment of Earnest money deposit (EMD) & Tender Document cost (TDC) in respect of e-tendering should be accepted through net banking or payment gateway only.
Due to implementation of GST by government of India with effect from 01-07-2017, All the Bidder / Tenderers are advice to ensure that they are GST compliant and their quoted tax structures/rates are as per GST law. The quoted rate should include all applicable taxes as per GST law and no claims will be entertained after the closing date of the tender.
In case the successful tenderer is not liable to be registered under CGST / IGST / UTGST / SGST act. The Railway shall deduct the applicable GST from his / Their Bills under Reverse Charge Mechanism (RCM) and deposit the same to the concerned tax authority.
Those tenderer/bidder who wish to get payment through LC are requested to follow the related rules mentioned in tender contract documents. For getting payment through letter of Credit (LC) and uploading duly filled up as per Annexure - O & Annexure P, attached with the tender documents.
Address of Firm: The tenderer should upload scanned copy in PDF format of the complete address of the Firm to which all correspondences shall be made by Railways.
Tender Form: The tenderer should upload scanned copy in PDF format of duly filled up "Tender Form" available at Appendix-IV of the attached tender document.
Other Letter: The tenderer may upload scanned copy in PDF format of any other letter/ documents etc., the agency intends to submit.
GSTIN: The tenderer should upload scanned copy in pdf format of the GSTIN in favor of the company.
Before execution of the work, the bidder has to submit all drawings, sketches, electrical item's list etc. for necessary approval from competent authority.
Design, Supply, Erection, Testing and Commissioning of 132/27 kV Traction Sub- Station including SCADA, Feeding Post and Shunt Capacitor Bank with Two (02) No. 21.6/30.24 MVA Traction Transformer at Rupai in TSK Division for N.F. Railway, along with associated Civil and S&T Works
ELC-RE-MLG-7-25-26-RT
ELC-RE-MLG-7-25-26-RT
Open
Works - General
365 Days
Kamrup, Assam
₹0
₹49.5 L
1 Jun 2026
30 Apr 2026
18 May 2026
4 items across 1 schedule · ₹1,76,81,757.5 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as weel as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Enginner-incharge. All kinds of soil | cum | 200.00 | 129.85 | 25,970 |
| 2 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 12500.00 | 700.5 | 87,56,250 |
| 3 | "Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)" | cum | 650.00 | 9,045.75 | 58,79,737.5 |
| 4 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level, Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 28000.00 | 107.85 | 30,19,800 |
| Schedule total | ₹1,76,81,757.5 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tender Document
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_221.pdf
ATTACHMENT
ACS1to10.pdf
ATTACHMENT
ACS11_compressed.pdf
ATTACHMENT
Locationplan.pdf
ATTACHMENT
retainingwall.pdf
ATTACHMENT
EPCTDRUPAITSS2026Mod-1_2.pdf
ATTACHMENT
RFPforEPCRPYTSSwithAS-2Mod-1_1.pdf
ATTACHMENT
PreBidQueryReply.pdf
CORRIGENDUM
PREBIDVCELC-RE-MLG-7-25-26-RT_1.pdf
CORRIGENDUM
RFPforEPCRPYTSSwithAS-2Mod-1.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .