SPECIAL REPAIR TO STREET LIGHT FITTINGS ALONG WITH ALLIED WORKS AT SUNJUWAN UNDER GE JAMMU

Amount

Excavation in trenches in soft/loose soil not exceeding 1.5m wide and n.exc 1.5 mtr in depth for laying of under ground electric cable and getting out complete all as specified.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified.

Removal of excavated surplus materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.

Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed.

Sand cushioning to underground cables provided with a layer of sand 8cm thick before laying the cable in trenches and 15cm thick after laying the cable in trenches complete all as specified. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be made and paid.

Galvanised steel tubing light grade of sizes 50 mm dia laid in trenches or under ground floor or road or fixed with pole for protection of cable with & including clamps of FI of appropriate size with bolts nuts and washer alongwith dismantling existing unsv pipe. complete all as specified.

Galvanised steel tubing light grade of sizes 40 mm bore laid in trenches or under ground floor or road or fixed with pole for protection of cable with & including clamps of FI of appropriate size with bolts nuts and washer alongwith dismantling existing unsv pipe. complete all as specified.

Supply, laying, jointing and testing cable in replacement LT underground Cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured,electric power cable (heavy duty) with aluminium conductor,1100 volts grade cross-sectional area 10 Sq mm, 2 core with earthed system conforming to IS 7098-1985 laid in trenches, in floor, in duct through pipes or along the pole complete all as specified and directed. Note: Wherever cable fixing/connection is required suitable thimble should be used as per site situation.

Supply, laying, jointing and testing cable in replacement LT underground Cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured,electric power cable (heavy duty) with aluminium conductor,1100 volts grade cross-sectional area 16 Sq mm, 2 core with earthed system conforming to IS 7098-1985 laid in trenches, in floor, in duct through pipes or along the pole complete all as specified and directed. Note: Wherever cable fixing/connection is required suitable thimble should be used as per site situation.

Supply, laying, jointing and testing cable in replacement LT underground Cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured,electric power cable (heavy duty) with aluminium conductor,1100 volts grade cross-sectional area 25 Sq mm, 3.5 core with earthed system conforming to IS 7098-1985 laid in trenches, in floor, in duct through pipes or along the pole complete all as specified and directed. Note: Wherever cable fixing/connection is required suitable thimble should be used as per site situation.

Supply, laying, jointing and testing cable in replacement LT underground Cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured,electric power cable (heavy duty) with aluminium conductor,1100 volts grade cross-sectional area 35 Sq mm, 3.5 core with earthed system conforming to IS 7098-1985 laid in trenches, in floor, in duct through pipes or along the pole complete all as specified and directed. Note: Wherever cable fixing/connection is required suitable thimble should be used as per site situation.

Supply and fix in replacement of PVC insulated and sheathed cable of size 1.5 sqmm 3 core aluminium conductor multistranded 1100 volt grade 230 volts complete all as dierected by Engr-in-Charge

Bracket made out of GI tubing 40 mm bore, suitable for 45/60/90 watt LED light, light grade upto 1.2 mtr length, bend to shape suitable for security light fitting with necessary MS clamps with one coat of red oxide and two coats of aluminium paint including nut, bolt, washers etc and including taking out unserviceable bracket, complete all as specified and as directed.

Taking down unserviceable Street/Security light fitting of any type from the pole/bldg after disconnecting electric connection carefully complete all as specified and directed

Energy Saving LED street light fitting 120 watt comprising a single piece, environment friendly light fittings including electronic driver, luminaire housing of pressure die-cast alluminum alloy LM24 for gear and extruded aluminium lamp housing, operating Voltage range from 85 Volts to 264 Volts AC 50 Hz, complete with all as specified and directed by Engr-in-charge.

Energy Saving LED street light fitting 90 watt comprising a single piece, environment friendly light fittings including electronic driver, luminaire housing of pressure die-cast alluminum alloy LM24 for gear and extruded aluminium lamp housing, operating Voltage range from 85 Volts to 264 Volts AC 50 Hz, complete with all as specified and directed by Engr-in-charge.

Energy Saving LED street light fitting 60 watt comprising a single piece, environment friendly light fittings including electronic driver, luminaire housing is of pressure die-cast alluminum alloy LM24 for gear and extruded aluminium lamp housing, operating Voltage range from 85 Volts to 264 Volts AC 50 Hz, complete with all as specified and directed by Engr-in-charge.

Energy Saving LED street light fitting 45 watt comprising a single piece, environment friendly light fittings including electrinic driver, luminaire housing is of pressure die-cast alluminum alloy LM24 for gear and extruded aluminium lamp housing, operating Voltage range from 85 Volts to 264 Volts AC 50 Hz, complete all as specified and directed by Engr-in-charge.

LED flood light fitting of capacity 200 watt incl inbuilt surge protection as per requirement LED flood light fittngs along with IP 65 protection, complete with all as specified and directed by Engr-in-charge.

1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire, one 10Sqmm twin core stranded conductor cable flat or cicular, complete with all as specified and directed by Engr-in-charge.

SMC Pole mounted box of size 10"x 8"x 4" with hinged door incl Clamp, nuts, bolts and washers, complete with all as specified and directed and including follwing accessories:- (a) MCB SP 10 Amp, 10 KA 'C' Series mounted on din rail-1 No. (b) Connector block suitable for 3ph, 4 wire min 16 sqmm cable-1 No

vishesh engineers

M/S BALI AGENCIES

M/S A K ENGINEERS & CO.

SUMEET TRADING CORPORATION

bamral builder

Jiwan Singh

GIANI ENGINEERING WORKS

M/S S K Electricals Regd