REPAIR / REPLACEMENT OF FLOORING, JOINERY, PLASTERING AND PLUMBING AND PERIODICAL SERVICES AT CERTAIN OFFRS MD ACCN AT BHAGAT ENCLAVE AT MIL STN SRI GANGANAGAR

Amount

M&L one coat of white wash on old decorated plastered or un-plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

M&L one coat of white wash on old decorated plastered or un-plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

M&L two coat of interior acrylic distemper of approved tint over priimer on old decorated surface of ceiling including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

Complete removal of existing treatment on Old External/internal wall surfaces of any desciption, preperation of surface by Mechanised sander having suction vaccum Bag using Smart periodical methodology complete all as specified and directed by Engr-in-Charge.

M & L applying a coat of primer on old wall prepared surface by using Roller complete all as specified and directed by Engr-in-Charge.

M & L applying with 3 mm thick wall care putty on wall , including smooth finishing to receive finishes etc complete all as specified and directed by Engg-in-charge

M&L two coat of interior acrylic distemper of approved tint on old prepared surface of wall by using Roller over complete all as specified and directed by Engr-in-Charge.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint(weather coat/Apex) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surface complete all as specified and directed by Engr-in-Charge. Note :- Paint will be done through mechanized tool/Roller.

M&L for Preparation of old internal wall surface and applying one coat of interior acrylic distemper of approved tint using Brush / Roller over wall complete all as specified and directed by Engr-in-Charge.

M&L applying one coat of cement base paint on old plastered surface of walls including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

M&L applying two coat of cement base paint on old plastered surface of walls including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paintcomplete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick wall including racking out joints, hacking for keys scrubbing down with water complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick, rendering in cement mortar 1:6 to brick/concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick, rendering in cement mortar CM 1:4 to brick/concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L 5mm thick, rendering in cement mortar 1:3 to ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L three coats of white wash on new plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

M&L two coats of cement base paint over one coat of Primer to new plastered surface on wall including preparation complete all as specified and directed by Engr-in-Charge.

M&L for prepration of New plastered Internal wall surface complete applying the following :- (a) Applying 3 mm thick two coat wall care putty on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified and directed by Engr-in-Charge. (b) Applying two coat of interior acrylic distemper of approved tint over a coat of primer by using Brush / Roller over complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles, interior grade (600x300)x7mm thick as on vertical surfaces like dados or skirting laid over and including 10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.

M&L for non-skid joint free coloured ceramic tile 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18Sqm, in floor etc. set & joined in cement slurry and pointed in coloured cement to match the shade of tile, including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-charge.

M&L for vitrified tiles 10 mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm,as in as in vertical surface like dado/ skirting etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and including 10mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge.

Taking down and Refixing old 500 Ltrs capacity Rotational moulded polyethylen water storage tank after cleaning and removing all scale and dirt etc from tanks and from mouths of cirulating pipes etc complete all as specified and directed by Engr-in-Charge.

Dismantling PVC water tanks and removing for capacity exceedin 250 litres & not exceeding 500 litres etc., complete all as specified and directed by Engr-in-Charge.

Dismantling of water tanks of capacity exc 500 Ltr & n.exc 1000 Ltr and removing from site complete all as specified and directed by Engr-in-Charge.

S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks triple layered(white coloured) (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete all as specified and directed by Engr-in-Charge.

S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks triple layered(white coloured)(cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete all as specified and directed by Engr-in-Charge.

S&F 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed by Engr-in-Charge.

S&F in repair 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed by Engr-in-Charge.

S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore, complete all as specified and directed by Engr-in-Charge.

Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed by Engr-in-Charge.

Ditto- but refixing 15 mm dia ,old steel tubing and connections in new or old possition (wall,ceiling and floors etc) complete all as specified and directed by Engr-in-Charge.

S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed by Engr-in-Charge.

Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed by Engr-in-Charge.

Ditto- but refixing 20 mm dia ,old steel tubing and connections in new or old possition (wall,ceiling and floors etc) complete all as specified and directed by Engr-in-Charge.

S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed by Engr-in-Charge.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth. In brick walls complete all as specified and directed by Engr-in-Charge.

S & F in repairs stainless steel sink with drainage board made out of 1.00 mm thick sheet for kitchen with plug, washers, waste fitting, waste pipe, cast iron cantilever brackets, connecting unions over all size 915mmx 460mm with bowl size 410mmx 330mmx 160mm. complete all as specified and directed by Engr-in-Charge.

S & F in repairs stainless steel Kitchen plate rack of overall minimum size 900mm x 750 mm x 250mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick sheet fixed with rawl plug and CP steel screws complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed by Engr-in-Charge.

S & F in repairs plastic water closet seat cover black/white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and directed by Engr-in-Charge.

S&F PTMT grating 125mm dia with waste hole (Minimium weight 40 grams) complete all as specified and directed by Engr-in-Charge.

S&F PTMT grating 100mm dia without hole (Minimium weight 25 grams) complete all as specified and directed by Engr-in-Charge.

S&F PVC connection suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete, all as specified.

S&F in repairs 15mm bore bib tap(long body), cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed by Engr-in-Charge.

S&F in repair CP angle valve for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type fixed as in repair complete all as specified and directed by Engr-in-Charge.

S&F in repair CP two way bib tap for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type fixed as in repair complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore concealed type, stop valve cast copper alloy screwed down high pressure with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-Charge.

S & F in repairs swan neck pillar cock 15mm dia cast copper alloy with capston heads, chromium plated, fancy type with long screwed shanks and fly nuts, screwed down high pressure with or without lettered 'Hot' or 'Cold' screwed for iron pipe complete all as specified and directed by Engineer-in-charge.

S&F in repair central hole wash basin mixer 15mm bore brass waste with 10mm dia 450mm long copper pipes complete all as specified and directed by Engineer-in-charge.

S&F in repair chromium plated brass wall mixture non telephonic with fancy knob with hot and cold arrangements with long shank and cup all as specified and as approved.complete all as specified and directed by Engr-in-Charge.

S&F in repair shower health faucet to EWC ,CP brass with minimum 1000 mm long CP flexible pipe, connection etc., complete all as specified and directed by Engr-in-Charge.

S&F in repairs Jet spray for EWC with all fixing arrangements complete all as specified and directed by Engineer in charge.

S&F in repair toilet paper holder, brass chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engineer-in-charge.

S&F in repair CP brass soap dish of fancy type, complete all as specified and directed by Engineer-in-charge

S&F in repair glass corner self assembly, fancy type, made of 5 mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete all as specified and directed by Engr-in-Charge..

S&F in repair 5 mm thick and 450 mm long glass shelves fancy type and fixed over CP brass brackets complete all as specified and directed by Engr-in-Charge.

S&F in repairs CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified and directed by Engr-in-Charge.

S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified.

S&F in repairs cabinet of PTMT with looking mirror of size 450x600mm complete all as specified and directed by Engineer-in-charge.

S & F waste couplings of stainless (half or full threaded) of 40 mm complete all as specified and directed by Engineer in charge.

S & F in repairs 32mm waste fittings brass chromium plated for glazed ware sink,basins etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other end fixed complete all as specified and directed by Engineer - in - Charge.

Dismentling of boarding any description fixed in any position with nails/ screws complete all as specified and directed by Engr-in-Charge.

S& F in repair 18 mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work as in Kitchen cabinet, cupboard shelf complete all as specified and directed by Engr-in-Charge.

M&L for 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed by Engr-in-Charge.

S&F 25 mm size magnetic catches with Plastic body and striking plate including letting in and fixed complete all as specified and directed by Engr-in-Charge.

S&F continuous (piano) hinges 20mm & 12 MM width of flap, mild steel bright finish or electrogalvanised of complete all as specified and directed by Engr-in-Charge. fixed with CP steel screws.

S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified and directed by Engr-in-Charge.

S&F in repair butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified and directed by Engr-in-Charge.

S & F Stainless steel fancy type 150 mm handle complete all as specified and directed by Engr-in-Charge.

S & F in repair Stainless steel fancy type 150 mm handle complete all as specified and directed by Engr In charge

S&F 40 mm dia brass polished cupboards knobs fixed with nut screw and washer of mild steel bright finished complete all as specified and directed by Engr-in-Charge.

Repairing/ leasening door / window shutters of anyincluding taking down ,repairs,refixing in same and other opening type complete all as specified and directed by Engineer - in - Charge.

S&F in repair 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete all as specified and directed by Engr-in-Charge.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each and removal complete all as specified and directed by Engr-in-Charge.

Taking down shutters any description exc 1 Sqm but n.exc 2 sqm each, and refixing in the same opening including easening and adjusting complete all as specified and directed by Engr-in-Charge.

S&F second class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engr-in-Charge.

S&F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed by Engr-in-Charge.

S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for preparation of Newly steel surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over red oxide primer complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in back of pressed steel door frame/chowkhat and fixing of bed block of hold fast etc complete all as specified and as directed.

S&F 2nd class HW factory made Plain, framed, pannelled shutters 35 mm thick (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I) Kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.

S&F 2nd class hardwood glazed skeleton shutters 35 mm thick open rebated and prepared to receive guage etc but divided into squares, with plain chamfered or rounded, metered and riveted sash bars any numbers including necessary beading used for protect the wire mesh also complete all as specified and directed by E-in-Charge. .

M&L for preparation Newly wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

M&L for Rubber sheet 50mm wide and of thickeness not less than 3mm fixed with stainless steel screws at the bottom of the door shutters complete all as specified and directed by Engr-in-Charge.

M&L for Plain fillets or beading of sectional area Exc 3 & n. exc 6 sq.cm of 2nd class hard wood square, rectangular or triangular in section , clean sawn, se-cured with nails or brads for securing wiremesh or similar works put together with glue pinned at joints in complete all as specified and directed by Engineer - in - Charge.

S & F fiber glass reinforced plastic (FRP) door frame (ISI marked) of cross-section 90mm x 45mm (minimum) having single rebate to receive shutter of 30mm thickness. The laminate door frame moulded with fire retardant grade unsaturate polyster resin and chopped mat, door frame laminate shall be 2mm thick, filled with core material and shall be filled with suitable wooden block for fixing hinges and other Hardware accessories, the frame shall be covered with fiber glass from all sides. MS stay shall be provided at the bottom to stand by the frame complete all as specified and directed by Engineer-in-Charge.

S & F 30mm thick glass fiber reinforced plastic (FRP) panelled door shutter (ISI marked) of required colour made with fire retardant grade unsaturated polyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles, filled with core material, wooden frame alround and suitable wooden block for fixing of hard ware accessories made out of seasoned wood inside as required, cast monolithically complete all as specified and directed by Engineer-in-Charge.

S&F aluminium handle, 150mm size, cast type, anodized (ISI marked) complete all as specified and directed by Engr-in-Charge..(D type Handle and back side staple)

S&F 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and directed by Engr-in-Charge.

S&F in repair300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed by Engr-in-Charge.

S&F in repair mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed by Engr-in-Charge.

S&F in repair 150mm length floor door stopper of aluminium alloy body and tongue,anodised with hard drawan steel spring fixed in floor complete all as specified and directed by Engr-in-Charge.

S&F Aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-charge

S&F Aluminium window (glazed and gauzed both),side hung type without sash bars, aluminum section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws,aluminium fitting such as peg stays 150mm long (01 nos), hinges type B-21 100mm long (02 Nos) suitable handle (01 No) with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed by Engr-in-Charge. Note: Only Glass and wiremesh will be measured and paid seperately.

S&F) Alumunium powder coated 50micron ventilator including frame and shutter and provision of neccessary rubber gasket for fixing glass panes etc complete all as shown in drawing No CEBT/SK-936 sheet 1/1. Note : Glass panes and wiremesh shall be measured and paid seperately under respectively Items .

S&F anodized aluminium grill powder coated of approved pattern of mesh 80x80mm, 6mm dia bars using U channel 25x12mm for windows / ventilators / doors complete all as specified and directed by Engr-in-Charge.

S&F 5.0 mm thick sheet glass ordinary quality in square not exceeding 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge.

S&F in repair 5.0 mm thick sheet glass ordinary quality in square not exceeding 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge.

S&F door closure hydraulically regulated, designation No 3 universal type suitable for door shutters (Aluminum body) of any size complete all as specified and directed by Engr-in-Charge.

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store(measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engr-in-Charge.

S & F in repair 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed by Engr-in-Charge.

S & F in repair 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and directed by Engr-in-Charge.

S & F in repair Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays for 100mm bore of pipe, including bolts and nuts and securing ends of stays to wall or roof etc complete all as specified and directed by Engineer - in - Charge.

S&F in repair 100mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to walls & fixing with clamps complete all as specified and directed by Engr-in-Charge.

S&F in repair 75mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but laid in trenches / floors complete all as specified and directed by Engr-in-Charge.

S&F in repairs stainless steel curtain rod 25 mm dia (minimum weight 0.36 Kg per RM) with brackets, fancy knobs and rings (20 cm c/c) etc complete all as specified and directed by Engr-in-Charge.

S&F in repair 100 bore,CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete all as specified and directed by Engr-in-Charge.

S&F in repair 75 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete all as specified and directed by Engr-in-Charge.

M&L for in repair 100mm dia of long neck CI floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed by Engr-in-Charge.

M&L for in repair 75mm dia of long neck CI floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed by Engr-in-Charge.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed by Engr-in-Charge.

Water proofing treatment to sunken slab and adjjoining vertical surfaces as specified under :- (a) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound trowel even and smooth with steel trowel on sunken surfaces (Note : WPC shall be measured and paid separately) complete all as specified and directed by Engr-in-Charge. (b) Applying first coat of chemical pidifin 2K(Dr Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer. (c) Provide a layer glass fibre mesh of size 2.25mm x2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation. (d) Applying second coat of chemical Pidifin 2K (Dr Fixit) @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers.

Supply only Integral water proofing compound ISI marked confirming to IS 2645 - 2003 complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:5:10, type E-2 as in filling of sunken floors etc complete all as specified and directed by Engr-in-Charge.

M&L 40 mm GI pipe medium grade, made to shape as in spout pipe in sunken/ verandah/ Balcony complete all as specified and directed by Engr-in-Charge.

M&L for hardcore of broken brick aggregate, gauge not exc. 63mm, deposited, spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified and directed by Engr-in-Charge.

M&L for factory made 60mm thick reflective type rubber moulded machine pressed precast cement concrete interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and no pigment laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

M&L for PCC (1:3:6) type C-2 (using 40mm graded agg) 75mm thick over a truly rammed surface as in sub base ,floors and pavings, plinth protection. complete all as specified and directed by Engr-in-Charge.

M&L for PCC (1:2:4) type B-1, 25mm thick as in floors,pavings e.t.c finished even and fair. complete all as specified and directed by Engr-in-Charge.

Demolition of RCC of any descrition such as Kitchen chimney, chajja, shelves, OHT Tanks. etc and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition)

M&L for reinforced cement concrete type B1 1:2:4 (20 mm graged aggregate) as in Slab supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all as specified and directed by Engr-in-Charge.

M&L for TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

Use and waste of form work torough finished surfaces of soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed by Engr-in-Charge.

M&L brick work with sub class 'B' bricks straight or curved on plan exceding 6 mtr mean radius in CM1:6 etc. complete all as specified and directed by Engr-in-Charge.

Notes : (i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

Aggarwal brothers and company

PAREEK AND COMPANY