SPL REPAIR TO CERTAIN BLDGS AND PROVN OF BATHROOM AND TOILET AT DRUGMULLA AND DAWAR UNDER THE AOR OF GE 874 EWS

Amount

Surface dressing n.exc 15 cm deep in soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide & 1.5m depth and getting out in any type of soil

Returning filling in including spreading levelling watering & well ramming in layers n. exc 25cm thick complete all as specified and directed.

Removing excavated materials soil n. exc 50m and depositing where directed at a level n. exc 5m above the starting point complete all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40mm graded stone as in foundation filling and mass concrete complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick walls in built in CM 1:4 complete all as specified and directed.

M&L for random rubble stone masonry using sand stone uncoursed well bonded bedded and solidly hearted, built in CM 1:4 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (20mm graded aggregate) as in coping, plinth band, bed block, slabs including rounded or chamfered angle as directed including necessary formwork etc. complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2(using 40 mm graded aggregate) as in sub base under flooring.

M&L for rendering 15mm thick in CM 1:4 mixed on fair faces of brick work or concrete surfaces if rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick CM 1:6 as in internal plastering to fair faces of brick masonry walls or concrete surfaces and finishing even & smooth complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in Slabs supported on walls, lintel beams or shelves complete all as specified and directed

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves/slabs including sup- ports, overhangs, etc. also splays between floors and beams, etc all as specified.

M&L TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M & L Mild steel bars Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders1 cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

S&F factory made solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

S&F 100 mm long butt hinges extruded aluminium anodised complete all as specified and directed.

S&F 75 mm size mild steel butt hinges medium weight complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 75 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminium anodised alloy handles fabricated type 150mm size of handle complete all as specified and directed.

S&F 100 mm long aluminium handles cast type anodised complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed.

S&F Mild Steel Work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

M&L MS screw bolt diameter of shank 11 to 15mm (machine made) with hexagonal head at one end screwed the other or screwed both ends, each screw end fitted with washers and one hexagonal nut exc 5cm but n.exc 10cm complete all as specified and as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and directed.

S&F 20mm thick 2nd class softwood boarding , planed one side , with butt joints and fixed with nails in facia eaves boarding complete all as specified and directed.

M&L for plywood, grade BWR, type BB, fixed with nails to timber frame work as in ceiling 6mm thick complete all as specified and directed.

M&L for 2nd class soft wood plain fillets square rectangular or triangular in section clean sawn secured with nails sectional area exc 3 & n.exc 6 Sqcm complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7-8 mm thick, area exc 0.11 sqm but n.exc 0.18 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for coloured glazed ceramic tiles as in skirting/ dado (350x250 or 450x350) x 7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match colour of the tile over backing coat/screed bed 10mm thick in CM1:4 on fair faces of brick/stonewall surfaces for laying dado/skirting complete all as specified and directed.

S&F steel water tubing of nominal bore dia 15mm medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F steel water tubing of nominal bore dia 20mm medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F vitreous China squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and directed.

S & F Vitreous China Urinal, Half stall type, white with grating and union for discharge pipe including providing and fixing plugs with and including 60mm long brass screws, pointing around urinal back in cement with PVC 32mm dia waste pipe & waste coupling including spreader complete all as specified and directed.

S&F PVC valveless, syphonic action type, low level PVC flushing cistern 10 ltr capacity white with flush pipe & all fitting complete all as specified and directed.

Supply & Fixing Vitreous China Ware Wash hand basin white flat back size 550mm x400mm including pedestal, cutting for and pinning ends of brackets or erecting stand including necessary PVC outlet pipe, CP coupling 32mm dia complete all as specified.

S&F PVC connection 15 mm length 450mm complete all as specified and directed.

S&F Bib taps cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and directed.

S&F Stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe complete all as specified and directed.

M&L Brass CP Basin mixer for mixing hot & cold water screwed down for iron pipe 15mm dia complete all as specified and directed.

S&F Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F 1000 Ltr capacity PVC water storage tank (cylindrical vertical with closed top) and fixed in position all as specified in SSR Part -I

S&F PTMT ball valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule 20mm dia complete all as specified and directed.

S&F 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to walls complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110mm bore, fitted with oval access door complete all as specified and directed.

S & F bend suitable for 110mm dia PVC (SWR) pipe complete all as specified and directed

S&F PVC (SWR) bends any radius, 75mm bore, fitted with oval access door complete all as specified and directed.

S&F PVC (SWR) reducers any radius 110mm bore complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction, single (single T) equal or unequal with door access complete all as specified and directed.

M&L for PVC (SWR) vent cowl 75mm dia complete all as specified and directed.

M&L PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for preparation of new or undecorated surfaces of wall and applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of acrylic distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of newly un treated surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and directed.

M&L for preparation new or undecorated surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in subbase of floor complete all as specified and directed.

M&L Chequered cement concrete tiles 20cm x20cmx25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment over 15mm thick screed bed or bedding layer in CM 1:4 as in floor complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6 type C-1 as in flooring of plinth protection complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with Screws complete all as specified and directed.

S&F Weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm lap complete all as specified and directed.

Dismantling timber scantling 40 Sq cm and over in section in any position in unframed work complete all as specified and directed.

M & L second class soft wood in scantling clean swan complete all as specified and directed.

M&L plywood grade BWR type BB, 12 mm thick fixed with nails to timber frame work in ceiling complete all as specified and directed.

Taking down chowkat with shutters exc.1.5 Sqm but n exc.4 Sqm (without taking off shutters from chowkhat) complete all as specified and directed.

Taking down chowkat with shutters n. exc.1.5Sqm (without taking off shutters from chowkhat) complete all as specified and directed.

S & F 2nd class soft wood plain solid straight chowkats and frames wrought framed, rebated on the solid complete all as specified and directed.

S & F plain framed, panelled shutters 35 mm thick 2nd class softwood, (any numbers of panels), with panels of timber flats on both sides of veneered particle board med density, wood particle board with commercial face fitted to chowkhat complete all as specified and directed.

S & F glazed & skeleton shutters 30 mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc.(without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.20 (a) fitted to chowkhat divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers complete all as specified and directed.

S&F 3 mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F for MS barrel tower bolt, stove enamelled black, with bright bolt of 150mm long complete all as specified and directed.

S&F for MS Sliding door bolt, plate type, stove enamelled black, with bright bolt not less than 12mm dia of 250mm long complete all as specified and directed.

S&F for MS butt hinges med. Weight, cold rolled 100mm long complete all as specified and directed.

M & L for mild steel pressed handles, oval type, stove enamelled black of 150mm long.

Demolition of cement concrete (un - reinforced ) in ground floors and pavings n exc. 15cm thick below or above ground level complete all as specified and directed.

M & L for 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregate) as in sub base or floor complete all as specified and directed.

M&L machine cut Kota stone flooring 20-25mm thick over 20mm thick cement screed (1: 6) base laid and jointed with grey cement slurry mixed with pigment match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment match the shade of the slab including rubbing and polishing complete over 10mm thick rendering in Cement Mortar 1:4 complete all as specified & directed.

M & L for 75 mm cement concrete PCC 1:3:6 Type C- (using 20 mm graded aggregate ) as in plinth protection complete all as specified and directed.

M &L RCC M 30 (20 mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M &L RCC M 30 (20 mm graded stone aggregate) in Columns, pillars, piers, posts and struts

Formwork to sides of concrete fair finished surface of concrete flat foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

Removing excavated material exc 50 m but n exc 100 m and depositing where directed at al level n. exc 1.50 m above the starting point complete all as specified and directed.

M&L for mild steel work Fe-410-W (Gde -E- 250) quality A roof truss (framed truss, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, etc complete all as specified and directed.

M&L for galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

S&F punched concertina coil 610 mm dia using high tensile spring steel wire 2.60 mm dia as per IS-4454 and steel tape in 19 mm width as per IS-513, with and including 18 micron zinc coating (Each coil is to be expanded upto max of 6.0 m length) including two coat of epoxy paint over one coat of primer complete all as specified and directed.

Taking down of cement plaster of any description including racking out of joints hacking for keys and scrubbing down with water etc complete all as specified and directed.

M & L for 10mm thick rendering in Cement Mortar 1:4 on any faces of brick or concrete surfaces of walls & finishing the surface even and smooth without using extra cement, complete all as specified and directed.

Supply only water proofing compound as per IS-2645 complete all as specified and directed.

M&L for Preparation of new plastered surfaces of wall and applying two coat of oil bound distemper complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Extra only over Item 104 for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. complete all as specified and directed.

M & L for two coat of painting on new surfaces of any description over 10 cm in width or girth over a coat of Red oxide primer complete all as specified and directed.

S&F For Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.

M&L for Second class soft wood 40 mm thick Boarding in Floors and skirting Planed one side, with butt joints and fixed with nails supplied and fixed in screws complete all as specified and directed.

M&L for Notches not exc 15cm girth (exc 25mm and not exc 50 mm thick) cut in complete all as specified and directed.

M&L for 2nd class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both sides fixed to frame work with secret nailed as in wall panelling 15mm including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of surface, complete all as specified and directed. Note : Frame work shall be measured and paid separately.

S&F Anodised aluminium snap grid frame work Size of grid 605 x 605mm for false ceiling complete all as specified and directed.

M&L For Providing and fixing Gypsum board 12mm thick in ceiling fixed with screw asper manufactures instructions complete all as specified and directed.

M&L 75 mm thick cement concrete as in Sub Base type C2, 1:3:6 (40mm gde stone aggregate) as in sub base complete all as specified and directed.

M&L 60mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade Complete all as specified and directed

M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over 15 mm thick rendering in Cement Mortar 1:6 complete all as specified and directed.

M & L for applying two coats of synthetic enamel painting on old surfaces of any description over 10 cm in width or girth complete all as specified and directed.

Plates (plain or chequered) Fe 410 -W (Gde- E- 250) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality of description) from wooden frames or stone, concrete or brick surrounds, glazad with putty or fixed with beads complete all as specified and directed.

S&F 4 mm Sheet glass ordinary quality in squre n.exc. 0.5Sqm in each pane complete all as specified and directed.

M & L for MS barrel tower bolt, stove enamelled black, with bright bolt of 100mm long.

M & L for mild steel pressed handles, oval type, stove enamelled black of 100mm long complete all as specified and directed.

All as per item No 121 above but 125mm long.

Dismantling wall and ceiling boards or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

M&L plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work in lining complete all as specified and directed.

All as per item No 124 above but except plywood.

All as per item No 74 above but except timber.

M&L for rendering 15mm thick on stone masonry surfaces or other than fair faces in cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed.

M& L for construction of 10 users septic tank complete, all as specified and shown on drawing No CESZ-TD-01/2015 Sheet No.1/3 & 2/3 dt 22 Feb 2015 (revised dt 21.03.2015 ) and specified in Particular Specifications.

M& L for construction of Soakage well of size 1.20 m dia at bottom and 3.00 m total depth complete all as specified and shown on drg No CESZ-TD-01/2015 Sheet No. 3/3 dt 22 Feb 2015 (revised dt 06.06.2015 ) and specified in Particular Specifications.

M&L Concrete bed with cement concrete type C-2, to drain pipes including packing under, haunching and completely surrounding pipes with concrete after they are laid and tested complete all as specified and directed.

M&L salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specified and directed.

Taking down MCB DB's complete with MCB's/Isolator etc removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

Disconnecting unserviceable sub main wiring/service connection of any size and including steel conduit and accessories and removing from site and making good the disturbed surfaces complete all as specified and directed.

M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi stranded flexible cable (green colour) as earth lead in and including cable 1100 volts grade including casing and capping/ conduit (ISI marked) including sunk cast iron/pressed steel terminal boxes, junction boxes, other boxes of suitable sizes for mounting of switches, sockets, fan regulators, light fittings etc, covered with plastic laminated sheet or PVC gang box 2 to 8 way as per site requirement fiing in surface mount or concealed including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per item No 135 herein before but wiring with 1.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board.

All as per item No 135 herein before but wiring with 1.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board.

All as per item No 135 herein before but wiring with 2.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for switch socket combination 6 pin 15 amps on independent board.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5A, flush type complete all as specified and directed.

S & F switch socket combination 2 in 1,5A, flush type complete all as specified and directed.

S & F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed.

S&F LED, 20 Watts, 4 ft, fittings complete with all accessories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed.

Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed.

M & L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.

Supply and fix LED Bulb 9 Watt complete all as specified and directed.

S&F 09W/10W Bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the plate not less than 1.5 mtr below normal ground level, connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point including testing on completion complete all as specified and directed.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for single door IP-42 DB's, made out of sheet steel enclosure, recessed type, factory made powder coated 4 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, complete all as specified and directed.

S & F of MCB SPN, 240volt, 40 to 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

Wiring for circuit/submain wiring alon gwith earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x6 sq. mm + 1x4 sq. mm earth wire complete all as specified and directed.

Supply and Fixing 1100 Volts grade heavy duty cable PVC insulated multistranded aluminium conductor served with PVC tape and overall PVC sheathed in services connections suspended by insulating hanger not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat or circular of size 10 Sqmm 2 core including service bracket complete all as specified and directed.

Supply and installation and testing of Hot, Cold and normal Water Dispenser with refrigerator including all accessories 20 litre capacity, 230 volts, 50 hz, Refrigerant type R134a, complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

M&L for wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x2.5 sq. mm + 1x1.5 sq. mm earth wire complete all as specified and directed.

Supply, Laying, jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable, 16 sqmm 2.0 core laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection complete all as specified and directed.

Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and directed by Engineer-in-charge. Note:-Punned thickness only shall be measured and paid.

Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' laid in trenches flat complete all as specified and directed.

Supplying and fixing , 50 mm bore light grade , Galvanised mild steel pipe / tubing, complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps , bolts , nuts and washers complete all as specified and directed. Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule.

M&L for cutting, threading and joining of existing GI pipe line upto 80 mm dia and inserting suitable tee for taking branch connection complete all as specified and directed.

Supply and laid in trenches pipe galvanized 25 mm dia medium grade complete including fitting such as bends, elbows, tees, short pieces, connectors, back nuts, caps, plugs and unions etc complete all as specified and directed.

Supply and fixing 25 mm gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe suitable for 20 mm dia pipe complete all as specified and directed.

M&L for lagging to pipes 20mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified and directed.

M/S BEE AAY CONSTRUCTIONS (BID ID -3412105)

M/S ABDUL KARIM RATHER (BID ID -3410959)