Road safety work on the Jalkheda link road situated along the bank of the Middle Ganga Canal

Type -B, "THRIE" : Metal Beam Crash Barrier Providing and erecting a "Thrie" metal beam crash comprishing of 3 mm thick corrugated sheet metal beam rail, 85 cm above road/ground, level, fixed on ISMC series channel vertical post 150 x 75 x 5 mm spaced 2m centre to centre, 2 m high, 1.15 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS 1367 and IS 1364 metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 mm, 546 mm long complete as per clause 810. As per Sor Including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc complete for proper completion of work. As per Direction of E/I.,but excluding GST

Road Delinator Delineator Supply & fixing of M.S Delineator made of Mild steel with pure polyester powder coating with the minimum thickness of powder of not less than 40 micron for protection against correction. The surface should be concealed so that there should not be any exposed without powder coating, Alternatively, these metal guide poles can be concealed with thermoplastic body. The posis shall have lan ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 mm base which can be anchored. Mild steel Guide poles shall conform to type XI sheeting specification as per IRC:67 and ASTM D4956 which would ensure to obtain clear visibility of the road alignment during right time. The retro reflective sheeting shall be tested for A certificate of having the sheeting tested for coefficent of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, Impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International / Government Laboratory/Institute by the manufactorer of the sheeting and in case the certificate is obtained from internnational, if should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM specification (D4956-09) on artifical accelerated weathering requirements from a reputed laboratory in Indian can be accepted provisionally. In such a situation the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC:67/2012 & Proof of the same report shall be uploaded which quoting tende. The rate shall including all materials, labour, T&P, transportation, Installation and incidentals all complete as per direction of the Enginee-in-charge. Including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc complete for proper completion of work. As per Direction of E/I.,but excluding GST