E-Tender for Construction of HDUs in Wards at BMHRC

Part-A (Civil Work):

Providing & fixing aluminum work for doors,windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285,fixing with dash fasteners of required dia. and size, including necessary filling up the gaps at junctions,1.e. At top,bottom and sides with required EPDM rubber/neoprene gaskets etc.. Aluminum sections shall be smooth , rust free, straight, mitred and jointed mechanically wherever required including cleat angle. Aluminum Snap beading for glazing/paneling,C.P brass/stainless steel screws,all complete as per architectural drawings and the direction of Engineer -in-charge. Glazing,paneling and dash fasteners to be paid for separately.: For fixed portion Powder Coated aluminium ( aluminum Thick ness of powder coating 50 micron)' Pipe

For shutters of doors,windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required ( Fittings shall be paid for separately) Powder Coated aluminium ( aluminum Thick ness of powder coating 50 micron)'

Providing & fixing 12mm thick pre- laminated particle board flat pressed three layer of graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors,windows shutters and partition frames with C.P brass/ stainless steel screws etc. complete as per directions of engineer – in – charge. Prelaminated particle board with decorative lamination on other side .

Providing & fixing glazing in aluminium door,window,ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings & the directions of the engineer -in- charge With Float glass panes of 5.0mm thickness

Providing & fixing aluminum handles,ISI marked, anodised transparent or dyed to required colour or shade,with necessary screws etc. complete : 125mm Aluminium handle

Providing & fixing bright finished brass 100mm mortice lock with 6 levers without pair of handles of approved quality for aluminum door ,with necessary screws etc. complete as per direction of Engineer – in – Charge..

Providing & fixing aluminum tower bolts, ISI marked, anodised transparent or dyed to required colour or shade,with necessary screws etc. complete : 250 x 10mm

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. Sheets and galvanized with zinc coating of 120gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25mm wide x 1.6 mm thick with flanges of 27mm and 37mm, at 1200mm centre to centre, one flange fixed to the ceilling with dash fastener 12.5 mm dia. X 50mm long with 6mm dia. bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. Channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. Intermediate channel with connecting clips made out of 2.64 mm dia x 230mm long G.i. Wire at every junction, including fixing perimeter channels 0.5mm thick 27 mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of gypsum board to ceiling section and perimeter channel with help of dry wall screws of size 3.5 x 25 mm at 230mm c/c including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacture's specification and also including the cost of making openins for light fitings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I

Providing & applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Removing white or colour wash by scrapping and sand Papering and preparing the surface smooth including necessary repairs to scratches etc. Complete.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on New work.

Sub Total Amount

Part-B (Electrical Work):

wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq mm FRLS PVC insulated conductor single core cable in surface/recessed Medium class PVC conduit,with modular switch,modular plate,suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc. as required Group A

wiring for light /power plug with 4x 4 sqmm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit along with 2 No. 4 sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as required

wiring for circuit / submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor , single core cable in surface/recessed medium class PVC conduit as required

2x1.5 sqmm +1x1.5 sqmm earth wire

2x4 sqmm +1x4 sqmm earth wire

Supplying and fixing 20 A 240 V,spn Industrial type socket outlet with 2 pole and earth ,metal enclosed plug top along with 20 A "c" curve ,SP,MCB in sheet steel enclosure ,on surface or in recess, with chained metal cover for the socket out let and complete with connection ,testing and commissioning etc. as required

Supplying and fixing of recessed mounting LED panel 2'x2' ,36 W 3600 lumens standard brand

Supplying and fixing 5 A to32 A rating 240/415 V, 10 KA "C" curve ,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc. as required

Single pole

Triple pole and neutral

Supplying and fixing following way, single pole and neutral sheet steel ,MCB distribution board .240 V on surface /recess, complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections ,powder painted including earthing etc. as required .(But without MCB/RCCB/isolator)

8 Way, double door

Supplying and fixing heavy duty wall mounted 450mm (18")

Supplying and fixing heavy duty Exhaust Fan (12")

Sub Total Amount Part-B (Electrical work)

Total Amount of Part- A & B (Civil & Electrical work)

GST applied on the Subtotal Amount (As mentioned in S.No. 2.16 of Col. No. 8)

A K MISHRA (BID ID -3191915)

K P CONSTRUCTION COMPANY (BID ID -3191962)