GE/PNH-50/2024-25

Amount

B/R PORTION: Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down cement plaster from brick walls hacking for keys & scrubbing down with water including raking of joints etc as in patches, complete all as specified and directed.

M&L 15 mm thick rendering in cement mortar 1:4 on bricks surface, surface finished even & smooth without using extra cement complete all as specified and directed .

M&L for 10mm thick rendering in cement mortar 1:6 on brick or concrete surfaces including finishing even and smooth without using extra cement complete all as specified and as directed.

Demolition of Brick work or stone/boulder masonry, built in Cement Mortar or cement lime mortar incl all quions, arches, pillars etc. complete all as specified and directed.

M&L for brick work with sub classs B bricks old size bricks straight of curved on plan exceeding 6 m mean radius built in cement mortar 1:6 , complete all as specified and directed.

M & L for cement concrete 1:2:4, B1 (using 20 mm graded stone agg) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, copings, kneelers, apex stones, bed plates, including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

50 mm thick cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in floors, hard standing etc and laid in alternate bays complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed

M&L for applying two coats of cement base paint on walls including preparation of new plastered or un-plastered surfaces of wall complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over and incl a coat of 1mm wall care putty, complete all as specified and directed.

Taking down chowkhats or frame not exc 1.5 Sqm each with shutters (without taking of shutter from the frames), complete all as specified and directed.

Taking down chowkhat or frame exc 1.5 Sqm but n exc 4 Sqm each with shutters (without taking of shutter from the frames), complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and double Side Prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of Double Side Prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the Stile and rails feathered at edges with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S & F Brass handles (150mm), cast type, polished bright, complete all as specified and directed.

S & F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F decorative laminate type 1, 1.5mm thick of surface finished, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction rates are incl for adhesive, complete all as specified and directed.

S & F butt hinges of size 100 mm, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11, complete all as specified and directed.

S & F Brass barrel tower bolts of size 200mm, with cast or sheet barrel and rolled or cast bolts and fixed, complete all as specified and directed.

S & F brass, sliding door bolt 300mm with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and directed.

Taking up or down 15mm bore steel tubing & connection including cleaning for or removal from site 15mm, complete all as specified and directed.

Taking up or down 20mm bore steel tubing & connection including cleaning for or removal from site 15mm, complete all as specified and directed.

Supplying & fixing 20 mm dia (outside) pipe to walls/chases/ceilings or laying in floors polyethylene-Aluminium Ployethylene (PE-AL-PE) composite pressure pipes including all Crimp type internal sealing Plansticmetal Composite fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.) and hooks (in case of concealed pipe work)/ clamps (in case of exposed pipe work), complete all as specified and directed.

Supplying & fixing 25 mm dia (outside) pipe to walls/chases/ceilings or laying in floors polyethylene -Aluminium Ployethylene (PE-AL-PE) composite pressure pipes including all Crimp type internal sealing Plansticmetal Composite fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.) and hooks (in case of concealed pipe work)/clamps (in case of exposed pipe work), complete all as specified and directed.

S&F in repair 15mm bore dia wall mixer 3-in-1 System with provision for both hand Shower and overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower), with chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, 25 mm dia (outside) pipe Make: Jaquar Cat No. - ‎FLP-5281PM or equivalent make as specified in PS and as approved by EIC and GE

S&F in repair 15mm bore WHB mixer, cast copper alloy, Single Lever tall Boy with 190mm extension body Fixed Spout without Popup Waste System with 600mm Long , chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as spd and directed. Make: Jaquar Cat No. - FLP-5005BPM or equivalent make as specified in PS and as approved by EIC and GE

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

M&L for providing edge moulding to 18-20mm thick stone of counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed.

S & F in repair pedestal pan (wall hung) Rimless, Blind Installation Wall Hung WC With PP Soft Close Slim Seat Cover, Hinges And Accessories Set,complete all as specified and directed. Make: Jaquar Cat No. - SLS-WHT-6953BIPPSM or equivalent make as specified in PS and as approved by EIC and GE

S&F Single piece Slim Concealed Cistern with Wall Mounting Frame, Installation Kit and “P-Type” Drain Pipe Connection Set for Wall Hung WC (without Flush Control Plate) points complete all as specified and directed by EIC. Make: Jaquar Cat No. - JCS-WHT-2400WP or equivalent make as specified in PS and as approved by EIC and GE

S&F in repair Hand Shower (Health Faucet) (ABS Body) with 8mm Dia, 1.2 Meter Long Spirochrome flex tube & Wall Hook, complete all as specified and directed. Make: Jaquar Cat No. - ALD-CHR-587 or equivalentmake as specified in PS and as approved by EIC and GE

S&F in repair 15mm bore dia CP angle cock, brass CP (fancy type) screwed down both ends for iron pipe or for unions and fixed complete all as specified and directed. Make: Jaquar Cat part No FLP-5053PM or equivalent make as specified in PS and as approved by EIC and GE

S&F in repair 15mm bore dia Concealed Stop valve (ISI Marked), brass CP (fancy type long shank) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. Make : Jaquar Cat No - FLP-5083KPM or equivalent make as specified in PS and as approved by EIC and GE

S & F in repair, wash basins, vitreous China table top round or oval in shape any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe incl CP waste coupling long threaded, complete all as specified and directed

S&F in repair PVC connection 600mm long 15mm dia complete all as specified and directed.

S & F wall to wall shower enclosure with one fixed glass and one sliding door - 2 part, complete all as specified and directed. Make- Jaquar, Cat part No- JSE-CHR-OPTSDR1520X or equivalent make as specified in PS and as approved by EIC and GE

S&F in repair 15mm dia brushed stainless steel shower panels of size 1400 x 200 mm, complete all as specified and directed. Make- Jaquar, Cat part No- SHP-SSF-ST8858B3 or equivalent make as specified in PS and as approved by EIC and GE

S&F 6 mm thick teakwood veneer decorative plywood, grade 1 (with BWR resin) with one side teak finish faces, fixed with headless nails to timber frame work, complete all as specified and directed.

M&L for french polishing on wood or wood base surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, complete all as specified and directed.

M&L for providing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh all as specified design and pattern as directed by Engr in Charge, rates are including for cutting of ceiling for light points and provn of cobing and counter sunk at corners/ or complete all as specified and directed by EIC.

M&L for preparation of newly POP surfaces and applying two or more coats of plastic emulsion paint over and incl a coat of oil primer to ceiling, complete all as specified and directed.

S & F Plywood, Action Tessa termite proof and water boiling proof plywood best quality, type BB, fixed with screws to timber frame 19mm thick fixed with gypsum screws, complete all as specified and directed.

S & F plywood, action tessa termite proof and water boiling proof plywood best quality, type BB, fixed with screws to timber frame 6mm thick fixed with headless nails incl polishing to beading, complete all as specified and directed.

S&F 100mm long round stainless steel legs fixed with screws bottom of cup boards to maintain ground clearance, complete all as specified and directed.

S&F decorative laminate, type 1, 0.9 mm thick of surface finished, colour and pattern as approved by EIC and GE, fixed with approved adhesive as per manufacturer's instruction rates are incl for adhesive, complete all as specified and directed.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar with ornamental and intricate design work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

M&L for preparation of new or previously untreated steel or iron surfaces of any description, not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over and incl a coat of red oxide primer, complete all as specified and directed.

M&L for providing and fixing factory made uPVC white colour Sliding window, three track made of extruded profiles with wall thickness of 2.3mm (± 0.2mm), Window profile with hollow section with multi chamber, Frame (88mm x 52mm), sliding sash (42mm x 67mm), Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2, ±0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.), complete all as specified and directed by EIC.

S&F 4.8mm thick tinted glass fixed to uPVCwindow, area of glass exc 0.5 sqm each pane, complete all as specified and directed.

M&L for dark shade/double charged/ ultracharged Virified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to match including screed bed or bedding layer of mortar 15 mm thick in cm 1:4 for laying floor finishes complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in sub base and flooring, etc. complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300x200x7mm / 450 mm x 350 mm x 7mm thick as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:4 complete all as specified and directed. Note: Shade/Colour of tile shall be approved by the GE.

M&L for 25 mm thick PCC, 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in sub base and flooring, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Taking down exsting roof treatment of any description in any condition including removing of cement plaster of concrete of any description form the roof surfaces and removing all the debris to a distance n exc 100m and roughening surfaces by sweeping clean and washing down with water to remove dust etc and applying evenly cement slurry at the rate of 3 kg/sqm over cleaned surfaces and providing 10mm thick cement screed in CM 1:4, finished surface even and smooth, after that cleaning the entire roof surface thoroughly to remove all loose particles, dust/dirt particles and applying with one coat of industrial bituminous primer at the rate of 0.40ltr /sqm over the plastered surfaces of roof and applying a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 1800c @ 1.2kg/sqm then applying APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less that 150 gms/sqm) laid with 75 mm side overlap and 150 mm overlap and 150 mm overlap primed surfaces by forced application as per manufactures instructions and applying two coats of aluminium paint over APP membrane, complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F in repair for PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) branch piece, double (double Y), equal or unequal, complete all as specified and directed.

S&F in repair PVC floor trap with grating including jointing with solvent cement to waste pipe 75 mm dia, complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR), vent cowl suitable for pipes complete all as specified and directed.

S&F Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane fixed complete all as specified and directed.

S&F 600 x 450 mm LED Mirror with Backlit, 5-Year Warranty, Premium Quality, and fixed to wooden plugs with CP brass screws and cup washers, complete all as specified and directed

S&F rotational moulded polyethylene water storage tanks triple layer (Cylindrical vertical with closed top) hoisted and fixed in position all as spd in SSR Pt-I, capacity in 1000 Ltrs including dismantling existing water tank and removing to store, complete all as specified and directed.

M&L for vitrified endura external tiles with mixture of white and grey cement in equal proportion and no pigments of size 300mmx300mmx12 mm thick, set, jointed and pointed in neat cement surry in floors including 20 mm thick screed bed in CM 1:6 for laying floor tiles, complete all as specified and diected.

S&F in repairs 20 mm bore, ball brass valves, high pressure, with polythene float and fly nuts complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair 48"-88" adjustable double curtain rod for doors & windows with bracket Set, curtains hanging extendable Iron metal pipe holder with white typho finial all as specified and directed.

M&L for 100 mm thick cement concrete type D- 2, 1:4:8 (using 40mm graded aggregate), as in base/sub base/floor etc complete all as specified and directed.

E&M PORTION:- Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

M&L for point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, collars, bends etc. with PVC terminals box & cover for mounting swtches, sockets, fan regulator etc for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :-

One light/fan/bell point controlled by one way switch 6 Amp complete all as specified and directed.

One 3/5 pin socket outlet 6 amp on same board complete all as specified and directed.

One 3/5 pin socket outlet 6 amp independent board complete all as specified and directed.

All as per srl item No 72 here in before but for one 3 pin socket outlet 16/20 Amp independent with two single core 2.5 Sqmm size cable as phase & neutral and one single core 2.5 Sqmm as in continuous earth wire complete all as specified and directed.

S&F modular switch flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed.

S&F modular switch flush type, 16 Amps single pole one way, (ISI marked), complete all as specified and directed.

S&F modular socket outlet 3 & 5 pin, 6 Amp flush type universal, complete all as specified and directed.

S&F modular socket outlet 2 in 1, 5 pin, 6 & 16 Amps flush type universal, complete all as specified and directed.

S&F ceiling rose, 3 terminal, surface bakelite 65 mm x 50mm, PVC/poly carbonate, insulated body, complete all as specified and directed.

S&F modular electronic fan regulator, 120W- 2 module on the existing phenolic laminated sheet etc. for 1200 / 1400mm sweep, complete all as specified and directed.

S & F in replacement of BLDC ceiling fan complete with blades of capacity 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, 5 star rated, 230 V, 50 Hz with all connecting accessories, complete all as specified and directed. Note: Colour and model as approved by EIC and GE

S&F in repair modular White cover plate with frame, 6 module, complete all as specified and directed.

S&F in repair modular White cover plate with frame, 3 module, complete all as specified and directed.

S&F in repair modular White cover plate with frame, 2 module, complete all as specified and directed.

S&F in repair modular metal flush box 6 module, complete all as specified and directed.

S&F in repair modular metal flush box 3 module, complete all as specified and directed.

S&F in repair modular metal flush box 2 module, complete all as specified and directed.

S&F in repair geyser of capacity 25 ltrs 5 star rated ISI marked horizontal storage type including all accessories such as safety valve, thermostate, NRV, connection pipes etc including making good and matching existing surface and finish complete all as specified and directed.

Supply and fixing in repair inverter LED batten 1x 20W, with square profile and polycarbonate channel, lithium iron battery with charging time of 8 to 10 hours and backup tile upto 04 hours with driver, holder incl LED tube light connecting up with with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing in repair decorative wall light fixture gold finish fixture with white glass diffuser suitable for 7.5 W LED filament lamp E27 incl bulb, complete all as specified and directed. Make: Havells cat part No LHFOAKD2TZ1D060 or equivalent make as specified in PS and as approved by EIC and GE

Supply and fixing in repair LED panel round slim 6 W, 4000K, compact die cast edge lit panel, recess mounted round fixture with opal diffuser including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in repair flexineon LED AC strip RGB IP65, complete all as specified and directed.

Supply and fixing in repair bed side wall light/reading light 2 W, flexible head white colour, 6500K, complete all as specified and directed. Make : Philips wall light cat part No. 919215850141 or equivalent make as specified in PS and as approved by EIC and GE

S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 8 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.

Taking out old unsv exhaust fan from site and replacement of exhaust fan, of sturdy engineering plastic body complete with louvers shutter, AC single Phase. 230V, 50 Hz, RPM 1200 incl all connecting accessories complete all as specified and directed by Engineer-in-charge.

S&F in repair MCB SPN 40-63 amps 415 volts 10 KA 'C' series, complete all as specified and directed.

S&F in repair MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series complete all as specified and directed.

S&F in repair single pole and neutral enclosure with a two pin and metal earth plug and socket complete with & incl one single pole MCB of 20 Amps complete all as specified and directed.

Taking out old unsv wall fan from site of capacity 400 mm sweep and replacement with new wall fan of 400 mm sweep, 230 V, 50 Hz incl all connecting accessories complete all as specified and directed by Engineer-in-charge.

S&F Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-1 as in earthing pit and cover 50mm thick reinforced with 6mm dia MS round bar @ 10cm C/C both way and MS frame, common salt, charcoal and testing on completion including dismantling unsv earthing, complete all as specified and directed.

SUNIL KUMAR SANGEET KUMAR AND SONS (BID ID -3157714)