Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.0 CrAccepted-AOC R O VPO DAULATPUR CHOWK TEHSIL GHANARI DISTRICT UNA HP | UNA | HIMACHAL PRADESH | 174301 | ₹7.0 Cr | L1 | Accepted-AOC Attached |
| 2 | Rejected-Technical | - | - | Rejected-Technical Non Responsive |
| 3 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 4 | Rejected-Technical | - | - | Rejected-Technical Non Responsive |
Tender Value
₹6.6 Cr
EMD Value
₹13.1 L
Closing Date
15 May 2020, 5:00 pmClosed
Superintending Engineer
SE 8th Circle HPPWD Hamirpur
including 5 year maintenance under PMGSY-II Batch-I 2019-20 RRP-II HP03152
2020_CEHP_91279_1
HP03152
Open Tender
Civil Works - Roads
Item Rate
365 days
Hamirpur
Please refer Tender documents.
14 documents required · 14 mandatory
₹5,000
EE Hamirpur
₹13.1 L
25 Jul 2020
11 Mar 2020
16 May 2020
11 Mar 2020
15 May 2020
11 Mar 2020
Amount
Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/wedging out of rock (where blasting is prohibited) and other intermediate classification of soil, setting out true to the required lines, grades width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification clause 1603, 1603 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus un-useful material to acquired width of the road or on approved dumping sites through all modes of transportation including head load or animals transport or mechanical means alongwith its leveling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and/or labour if required. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts. A recovery of useful stone for 1913.37 cum (One thousand nine hundred thirteen point thirty seven) cubic metre @ Rs. 300/- (Rupees three hundred only) per cubic metre shall be effected on pro-rata basis in each running bill from this item. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of tables 300 and 300 as per Technical Specification Clause 301.5 including entire carriage of material within all leads and lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Construction of sub-grade and earthen shoulder with approved material obtained from borrow pits with in all lifts and leads transporting to site, spreading, grading to required slope and compacted to meet requirement of Tables 300.2 with in all leads and lifts as per Technical Specification Clause 303.1 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rocks, chiseling/wedging out of rocks (where blasting is prohibited) as per drawings and technical specification clause 305.1 and as per direction of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto all leads and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (One hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (One cement : four sand : eight graded crushed stone aggregate) 25mm (twenty five millimetre) nominal size in foundation and plinth, retaining and breast wall complete as per drawing and technical specifications Clause 802, 803, 1202 and 1203 as per the direction of the Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Back filling behind abutment , wing walls and return walls complete as per drawings and technical specification Clause 1204 with Granular Material and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing weep holes in brick masonry / Stone masonry / plain/reinforced concrete in retaining walls, breast walls and the like with 100mm ( One hundred) dia PVC pipe Finolex/ Supreme having pressure not less than 4.00 Kg/Cm² ( four kilogram ) per centimetre square extending through the full width of the structure with slope of 1(V):20(H) ( one vertical : twenty horizontal ) towards drawing face complete as per drawing and technical specification clauses 614,709,1204 within all leads, lifts and carriage of material by all modes of transportation as per the direction of Engineer- in-chrage. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and laying of boulder apron laid in wire crates with 5 mm ( Five millimetre) dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm ( one hunded into one hundred millimetre) mesh (woven diagonally) including 10 ( Ten) percent extra for laps and joints laid with stone boulders weighing not less than 25 kg ( Twenty five kilogram) each as per drawing and technical specifications Clause 1301 in all leads and lifts and carriage of material by all modes of transportation as per the direction of Engineer- in-chrage. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain/reinforced concrete in sub structures , drains, parapets and open foundation for all type of structures complete of plain cement concrete Grade M-10 (ten) design mix on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths including the cost of form work as per drawings and technical specification clause 802, 803, 1202 and 1203 as per direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and laying (to level and slopes) 900mm dia (Nine hundred millimetre dia metre) reinforced cement concrete light duty non pressure pipe I.S. class NP-3 for culverts on first class bedding of granular material in single row including fixing collars with cement mortar 1:2 (One cement : two sand) but excluding the cost of excavation, protection work, back filling, concrete and masonry work in head walls and parapets as per drawing and technical specification clause 1106 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Scarifying the existing bituminous road surface with scarifying machine upto a depth of 150 mm (one hundred fifty milimetre) and disposal of scarified material as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Construction of gravel/soil aggregate, sub-base/base by providing well graded material of nominal maximum size grading 80mm (Eighty millimetre) as per table 2.3 of IRC SP 77-2008 spreading in uniform layers with tractor mount appropriate grading arrangements on prepared surface, mixing by mix in place method at OMC with tractor mount appropriate rotavator attachment and compaction with three wheel 80-100 KN static roller capacity to achieve the desired density complete as per specifications contained in Para 2.2, 3.6 and 3.7 of IRC SP 77-2008 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN ( eighty into hundred )weight to achieve the desired density including lighting, barricading and maintenance of diversion, etcetra as per Tables 400.11 and 400.12 and Technical Specification Clause 406 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and applying priming coat with bitumen Emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer @ 0.85kg/sqm (Zero point eight five kilogram per square metre ) using mechanical means as per Technical Specification Clause 502 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads, lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 Kg per sqm (Zero point two seven five kilogram) per square metre on prepared granular surfaces treated with primer and cleaned with hydraulic broom as per technical specification clause 503 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and laying 50 mm( Fifty Millimetre) thick bituminous macadam using Bitumen VG-30 @ minimum 3.3% (Three point three percent) of weight of mix with hot mix plant using crushed stone aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and laying 25mm ( twenty five millimetre) thick semi dense bituminous concrete with 40-60 ( forty to sixty) TPH batch type HMP producing an average output of 50 ( fifty tonne) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ (at the rate of) minimum 5.0 (five) per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORD specification clause No. 509 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and fixing 80mm (Eighty millimetre) heavy duty precast cement concrete interlocking paver blocks manufactured by the help of Hydro vibratory machine having compressive strength of M-40 (M-Forty) grade as per IS-15658-2006. (N.T.C. make National Tile Corporation including border or curve block grey or coloured. The paver shall be laid on 40mm (Forty millimetre) sand filling compacted as per direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 ( forty three) grade cement or any other type as per Clause 1501.2.2 M30 ( M-thirty) Grade, coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm,( twenty five millimetre) mixed in a concrete mixer of not less than 0.2 cum ( zero point two millimetre) capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 ( one hundred twenty five) micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrator and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealent, dowel bars, near approaches to bridge/culvert and construction joints, admixture as approved, curing of concrete slabs for 14 (fourteen) days, curing compound (where specified) and water finishing to lines and grades as per drawing and Technical Specifications Clauce 1501 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated cement concrete for plain/reinforced concrete in super structure for all type of structures complete of plain cement concrete Grade M-25 (M-Twenty Five) design mix with minimum cement content 360kg (three hundred sixty kilogram) per cubic metre on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths including the cost of form work as per drawings and technical specification clause 802, 803, 1202 and 1203 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Supplying fitting and placing HYSD bar (Fe-500) of TATA/SAIL in reinforcement in super-structure in all heights including cost of binding wire and and cost for cutting, straightening and placing in position of bars complete as per drawing and technical specifications as per direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Construction of parapets with cement concrete mechanically mixed and vibrated M-10 design mix and curing complete including the cost of form work with steel plates and as per drawing and HPPWD, technical specification and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm (One point six millimetre) thick, top and middle plate duly welded with MS flat iron( TATA/SAIL) 25mm x 5m (Twenty five millimetre into five metre) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mmx5mm (Twenty five into twenty five into five millimetre). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. (Two numbers)75mm x 75mm ( Seventi five millimetre into seventy five millimetre) of 12 (Twelve) SWG sheet tubes posts ( TATA/SAIL) duly embedded in cement concrete M-15 (M-fifteen) grade blocks of 450mm x 450mm x 600 mm, 600mm (Four hundred fifty into four hundred fifty into six hundred millimetre, Six hundred) below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm (Forty seven millimetre into forty seven millimetre) of 12 (Twelve) SWG steel plate tube. All M.S. will be stove embedded on both sides. Lettering and printing arrows, border etc. will be painted with readymixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 as per approved drawing Clause 1701.2.2 including entire carriage of material within all leads, lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and fixing 5th (Fifth) kilometre stone (precast) reinforced cement concrete mechanically mixed and vibrated M-15 (M-fifteen) grade design mix with minimum cement content 240kg (two hundred forty kilogram) per cubic metre, kilometre stone/ Local stone of standard design as per IRC :8 Fixing in position including painting and printing etcetera as per drawing and M.O.R.D. technical specification rural roads Clause 1703 as per direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and fixing Ordinary kilometre stone (precast) reinforced cement concrete mechanically mixed and vibrated M-15 (M-fifteen) grade design mix with minimum cement content 240kg (two hundred forty kilogram) per cubic metre, kilometre stone/ Local stone of standard design as per IRC :8 Fixing in position including painting and printing etcetra as per drawing and M.O.R.D. technical specification rural roads Clause 1703 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and fixing 200 (Two hundred) metre stone (precast) reinforced cement concrete mechanically mixed and vibrated M-15 (M-fifteen) grade design mix with minimum cement content 240kg (two hundred forty kilogram) per cubic metre, kilometre stone/ Local stone of standard design as per IRC :8 Fixing in position including painting and printing etcetra as per drawing and M.O.R.D. technical specification rural roads Clause 1703 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and fixing Boundary Pillar reinforced cement concrete mechanically mixed and vibrated M-15 (M-fifteen) grade design mix with minimum cement content 240kg (two hundred forty kilogram) per cubic metre, boundary pillar / Local stone of standard design as per IRC :25 fixed in position including finishing and lettering but excluding painting as per drawing and M.O.R.D. technical specification rural roads Clause 1703 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and fixing retro - reflectorised Traffic Signs 900x900x900mm ( nine hundred into nine hundred into nine hundred milimetre) triangular of retro reflectorised cautionary, mandatory and informatory sign as per IRC 67 made of encapsulated lens type reflective sheeting wise clause 1701.2.3 fixed over aluminum sheeting 1.5mm ( one point five milimetre) thick supported on a mild steel angle iron ( TATA/SAIL) post 75mmx75mmx6mm (Seventy five into Seventy five into Six millimetre) firmly fixed to the ground by means of properly designed foundation with M-15 (M-Fifteen) grade cement concrete 450mmx450mmx600mmx600mm (Four hundred fifty into four hundred fifty into six hundred in to Six hundred millimetre) below ground level as per drawings and technical specifications clause 801 as per direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and erecting direction and place identification signs with size 900 x 600mm ( Nine hundred into six hundred milmetre) retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminum sheeting, 2mm (Two millimetre) thick with area not exceeding 0.9sqm (Zero point nine square metre) supported on a mild steel 2 Nos (Two Numbers) single angle iron ( TATA/SAIL) post 75x75x6mm (Seventy five into seventy five into six millimetre) firmly fixed to the ground by means of properly designed foundation with M-15 (M-fifteen) grade cement concrete 450x450x600mm, 600mm (Four hundred fifty into four hundred fifty into six hundred millimetre, six hundred millimetre) below ground level as per approved drawing and technical specification clause 1701 as per direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and erecting direction and place identification signs with size 1200 x 900mm ( One thousand two hundred into nine hundred milmetre) retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminum sheeting, 2mm (Two millimetre) thick with area not exceeding 0.9sqm (Zero point nine square metre) supported on a mild steel 2Nos. ( Two Numbers) single angle iron post ( TATA/SAIL) 75x75x6mm (Seventy five into seventy five into six millimetre) firmly fixed to the ground by means of properly designed foundation with M-15 (M-fifteen) grade cement concrete 450x450x600mm, 600mm (Four hundred fifty into four hundred fifty into six hundred millimetre, six hundred millimetre) below ground level as per approved drawing and technical specification clause 1701 as per direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and Fixing typical PMGSY information sign board with Logo as per MORD specification and drawing three MS plate of 1.6mm (one point six milimetre) thick top and middle plate duly welded with MS flat iron 25mm x 25mm x 5mm (twenty five milimetre into twenty five milimetre into five milimetre). The iron frame of the lower most plate and flat iron ( TATA/SAIL) frame of middle plate will be welded to 2 No.(two numbers) 75mm x 75mm ( seventy five milimetre into seventy five milimetre) of 12 (twelve) SWG sheet tubes parts duly embedded in cement concrete M-15 (fifteen) grade block of 450mm x 450mm x 600mm x 600mm (four hundred fifty milimetre into four hundred fifty milimetre into six hundred milimetre into six hundred milimetre) below ground level the top most plate will be welded to middle plate by 47mm x 47mm (forty seven milimetre into forty seven milimetre milimetre) of 125 (one hundred twenty five) SWG steel plate tube. All MS will be stove enameled on both side lettering and painting arrows border etcetra will be painted with ready mixed synthetic enameled paint of superior quality in required shade and colour. All section of frame post and steel tube will be painted with primer and two coats of epoxy paint as per drawing and clause 1701 and Annexure 1700.1(PMGSY Project double side) as per direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and Fixing of "Citizen Information Board" as per specification and drawings two MS plate of 1.6mm ( One point six millimetre) thick duly welded with mild steel angle iron frame ( TATA/SAIL) 25mm x 25mm x 5mm ( twenty five into twenty five into five milimetre) size on edges supported with two Nos.vertical post and two Nos. horizontal post made of 75mm x 75mm (seventy five milimetre into seventy five milimetre) of 12 ( twelve) SWG sheet tubes posts duly embedded in cement concrete M-15 ( fifteen) grade block of 600mm x 600mm x 750mm ( six hundred milimetre into six hundred milimetre into seven hundred fifty milimetre) below ground level. All MS will be stove enameled on both side lettering and painting arrows border etcetera will be painted with ready mixed synthetic enameled paint of superior quality in required shade and colour. All section of framed posts and steel tube( TATA/SAIL) will be painted with primer and two coats of epoxy paint as per drawingand the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Painting lines, dashes, arrows etcetera on roads with cold plastic road marking paint conforming to IRC 35: 1997 Cl. 5.4.2 on bituminous/concrete surface including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical specification Clause 1702 including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and fixing of road stud Cat Eye 100x90mm (one hundred into ninety millimetre) size Yellow 3M Molded Shank RPM (ABS body) with one side Yellow and one side Red resistant to corrosive effect of salt and grit fitted with lense reflectors installed in concrete or asphaltic surface by drilling holes 30mm (thirty) millimetre upto a depth of 600mm (six hundred) millimtre and bedded in a suitable bituminious grout or epoxy mortar all as per BS:873 (Part4) 1973 as per direction of the Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing and Erecting Type -A "W" metal beam crash barrier comprising of 3 mm ( Three millimetre) thick corrugated sheet metal beam rail to be kept 70 cm (Seventy centimetre) above road/ground level and to be fixed on ISMC series channel vertical post, 150 x 75 x 5 mm (One hundred fifty into seventy five into five millimetre) to be spaced 2 m (Two metre) centre to centre to be kept 1.80 mtr.(One point eightymetre) below groung / road level. All steel parts and fitments to be galvanised by hot dip process.All fittings to conform to IS:1367 and IS:1364, as emended upto date metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 mm (One hundred fifty into seventy five into five millimetre) and 330 mm (Three hundred thirty millimetre) long complete as per clause 810 conforming to MORT & H ( Ministry of road transport and Highway specification ( Latest revision ) including all fitting required for erecting at road site of materials. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Planting containerized tree plants including pitting , transplanting, composting and mulching on slopes 30 - 45 degree ( Thirty to forty five degree) , pit size 60 cm ( sixty centimetre) dia meter X 60 Cm (sixty centimetre) depth . Backfill with compost @ 0.0212 Cum ( Zero point zero two one two) / pit mixed with original soil ( Cost of plants , FYM shall be paid for separately ) as per direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Providing containerized plants of appropriate species ( size of plants should not be less than 60cm ( sixty centimetre) including transportation from nursery site to the site of work and as per direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Supplying and stacking of well decayed farm yard manure at the site of work as per instructions by the Engineeer- in charge. The Farm yard manure shall be free from earth stone, brick bats and other extraneous stuff. The stacks of F.Y.M. Should be 50 cm ( fifty centimetre) in height having volume not less then 3.00 cum ( three cubic metre) . The volume of the stacksshall be reduced by 8% ( eight percent) for looseness to arrive at the net quantity for payment.Composit @ 12.5 % ( twelve point five percent ) of the excavated earth and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Bamboo tree guard 1.80 mtr. ( one point eighty metre) Hight with 30 cm ( thirty centimetre) dia with 4 Nos. ( four number) verticals strips ( length 1.80 mtr.( one point eighty metre) Breadth 30 mm ( thirty millimetre) thickness 5mm ( five millimetre) further weaving with different smaller size of verticals and circular strips. The weaved portion should be 125 cm ( one hundred twenty five millimetre) having 3 (three) rings at the top, bottom and middle portion. The first ring should be 55 cm (fifty five centimetre) above the 4 ( four) thick vertical strips including strengthening with barbed wire. Supplying and fixing of bamboo tree gaurds as per design enclosed and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are excluding GST but inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government.
Maintenance cost for 1st Year
Maintenance cost for 2nd year
Maintenance cost for 3rd year
Maintenance cost for 4th year
Maintenance cost for 5th year
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .