COMPREHENSIVE MAINTENANCE OF BR REPAIR WORK UNDER AGE BR I AT AF STN BAMRAULI

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified.

S&F of Pre-painted galvaLume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws, complete all as specified and directed.

S & F of pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description in any position not otherwise provided for, complete all as specified and directed.

Dismantling of brick tiles laid bedded and pointed in any morter or brick tiles on roof, floors, channels, kerbs, aprons etc,cement concrete of any description & in any position not otherwise specifically provided for, complete all as specified and directed.

Demolition of Mud/mud puska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof), complete all as specified and directed.

M&L for cutting out cracks to v-section in existing roofs or terraciv cleaning grouting with cement and sand slurry 1:3, complete all as specified and directed.

M&L for cutting grooves in brick wall 75mm wide and 65mm deep & shaping horizontal face of groove with cement, complete all as specified and directed.

M&L for PCC 1:3:6 type B-1(using 20mm graded stone crushed aggregate) for providing cement concrete as levelling and roof kerbs or mud stops, including finishing the surface with grinder to receive the acrylic based water proofing material, rounded or chamfered on edges etc, complete all as specified and directed.

M&L for rendering or bedding layer 15mm thick in cement mortar (1:3) cover concrete surfaces of roof, mixed with WPC 2% wt of cement inclduing finishing surfaces even and fair without using extra cement, complete all as specified and directed. (Note: WPC will be measured and paid separately).

M&L for preparation of new surface and applying a coat of hot blown bitumen of grade 85/25 conforming to IS 702 over primed surface of roof slab @ 1.20 Kg/Sqm, complete all as specified and directed.

M&L for APP based polymeric water proofing membrane minimum weight 3 Kg/ Sqm and minimum 3mm thick reinforced with polyster non wove fabrick (Weight not less than 150gms/Sqm or as per IS), laid over hot bitumen surface by torched application with the strict supervision of manufacturers technical supervisor. Membrane shall be laid with 100mm side/end lap on prepared surface as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer, complete all as specified and directed.

Excavation in post holes (or similer holes ) each n. exc 0.5 cum getting out in hard and dense soil returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, complete all as specified and directed.

M&L for roof trusses framed), trussed, rail and fastenig and bracket framing (Beam, Tee, angl, tubler Sectin) of FE-410(Gde-E250) incl distance peaces, complete all as specified and directed.

M&L for rolled sections Fe 410 as in main and cross beams, hip and jack rafters; purlins where connected to common rafters, post and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed.

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165, complete all as specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

Providing & fixing false ceiling at all heights with semi peforated 12 mm thick micro tengular edged GRG (Glass Fibre Reinforced Gypsum) false eiling tiles of 12mm Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS tiles tiles 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 00mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and complete all as specified and directed of the Engineer-in- Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation. etc) or insulation boards/slabs/blankets, any thickness, includinguding cover fillets, complete all as specified and directed.

S&F of hollow PVC wall paneling consisting of 10 mm thick any colour or pattern single side prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frames as specification and drawing.

S&F in repair roller blind decorated horizontal type with necessary pulling threads aluminium channel along with all arrangement tixed to wall, completed all as sspecified & directed.

Taking down chowkaths or frames n.exc 1.5 sqm (without takingoff shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc, complete all as specified and directed.

Taking down chowkaths or frames Exc 1.5 sqm but n.exc 4 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc, complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each, complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each and refixing in the same opening after repair etc, complete all as specified and directed.

S&F in repair powder coating anodised aluminium glass partion wall with frame size 101.60 x 44.45 x 2.00 mm thick and shutter aluminium anodised an top rail 47.62 x 44.45 x 1.50mm and style 47.5 x 44.5 x 1.50 mm lock rail 83.5 x 44.45 x1.50mm and bottom rail 150.00 x 44.50 x 2.50 mm with 5.mm thick plain glass including lock and necessary fitting and fixture, complete all as specified and directed.

S&F in repair powder coated anodised aluminium doors (sliding/ hanging type) with frame size 101.60 x 44.45 x 2.00 mm thick and shutter aluminium anodised and top rail 47.62 x 44.45 x 1.50 mm style 47.5 x 44.5x1.5mm, lock rail 83.50 x 44.45 x 1.50 mm and bottom rail 150.00 x 44.50 x 2.50 mm including necessary aluminium fittings like aluminium butt hinges 04 Nos, aluminium handle 150mm 02 Nos, aluminium tower bolts 200 mm 01 No, aluminium door stopper 01 Nos, jointing cleats glazing cleats, rubber packing, anodised aluminium shape beading screws etc with panelling in two parts with 12mm thick prelaminted particle board in lower panel and 5mm thick tinted glass in upper panels including all fittings & fixture, complete all as specified and directed.

S&F in repair of powder coating aluminium anodized grills powder coated with 6x5mm aluminium section having square gap of 100mm with fixing rails of channels 12-15mm, complete all as specified and directed.

S & F in repair 5.5 mm thick plain glass, pin headed type and fixed with wooden beads in squares not exceeding 0.5 Sq. M in each pane, complete all as specified and directed.

S& F of Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including supply & fixing lugs, 125 mm size hinges, lock strike plate, etc., complete all as specified and directed.

S& F of Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including supply & fixing lugs,125 mm size MS hinges, lock strike plate, etc., complete all as specified and directed.

S & F of 30mm thick flush shutter , solid core construction with block board core and plywod face panels, both faces are covered with decorative face veneer with lipping/ frame to match, complete all as specified and directed.

Supply & fixed of 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces of rail and stile as per IS : 1003. The size of (Part I), kiln seasoned and chemically pressure treated ; supplied and fitted to chowkats, complete all as specified and directed.

S&F of 35 mm thick factory made glazed & Skelton shutter of 2nd class Hard Wood open rebated & prepared to receive glass or gauze etc without sash bar open rebated with edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass or guage etc size of stiles rails etc as specified in sec 8 clause 8.24 (a) of SSR Part-I (2010), complete all as specified and directed.

S&F of solid PVC door frames of size 50mm x 47 mm made out of 5mm single side prelam PVC sheet used instead of Plaincolour PVC sheet & edges will be paintednt reinforced with MS square tube, supply & fixing in opening as per specification & drawing all as specified and directed.

S&F of Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification all as specified and directed.

S&F of But hinges, 100 mm long extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22, complete all as specified and directed.

S&F of Aluminium tower bolt of extruded section, 200mm length of bolt and fixed with screws, complete all as specified and directed.

S&F of 125mm size, aluminium (cast type) anodized, handle and fixed with screws, complete all as specified and directed.

S&F of 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws, complete all as specified and directed.

S&F of floor door stopper Aluminium body and tongue,anodised overall length of cover plate of size 140 mm long with hard drawn steel spring, complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-1 (20 mm graded mechanically crushed stone aggregate) as in filling pressed steel frame /hold fast blocks etc, complete all as specified and directed.

S&F of Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Supply and fix drapery rod 19 mm inner dia (wall thickness not les than 1.6mm) stainless steel fancy type bracket fixed with rawl plug or screw on walls/beam and shall be provided with fancy finial at ends, complete of approved all as specified and directed. Note Bracket measured and paid seperately.

Supply and fix of curtain brackets stainless steel with matching with the curtain rod, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises, complete all as specified and directed.

M&L for Vetrified Ceramic tiles / Grestough/Duragres(GVT) 10mm thick light marble finish shade (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.72 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match. laid over and including 15mm thick screed bed with cement mortar 1:6, complete all as specified and directed.

Material & Labour for Glazed ceramic tiles in vertical surfaces 450x350mmx7mm /600x450x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surface such as skirting , dado etc. over 10 mm thick backing coat plaster in CM 1:4, complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thickscreed bed with cement mortar 1:6, complete all as specified and directed.

M&L for 300 x 300 or 400x400, 9 to 10 mm thick, coloured, Endura heavy duty tiles, pre cast factory made, laid in floors or fixed to wall, set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles, laid over and incl 20 mm thick screed bed in CM (1:6), surface finished even and rough to receive the tiles, complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thickscreed bed with cement mortar 1:6, complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for 18-20mm thick granite work table rubbed and polished for wall lining /kitchen platform over 12mm thick cement mortar 1:3 thick and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for 18- 20mm thick granite Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white ement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

Rounding to edges of granite slabe such as cooking platform, complete all as specified and directed.

Demolition of PCC in ground floor n.exc15cm thickness below or above ground level, complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8 type D-2) using 40mm graded crushed aggregate as in sub base of floor, complete all as specified and directed.

M & L for 20mm thick screed bed or bedding layer in CM 1:6 for laying floor tiles, complete all as specified and directed.

M & L for Chequered cement concrete coloured tiles pre polished 30cmx30cmx22-25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors, complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar incl all quoins, pillars, arches etc but excluding ashlar facing, complete all as specified and directed

Demolition of cement concrete in ground floor and paving RCC in any description and in any position, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6), complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any redius, built in CM (1:4) in half brick thick complete all as specified and directed.

M&L for reuse old brick for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6), complete all as specified and directed..(Note : bricks obtain from item No 62.00 as above)

Taking down Cement plaster on brick or stone walls incl raking out joints hacking for key & scrubbing down with water etc, compplete all as specified and directed.

M & L for 10mm thick Cement plaster (1:6) on other than fair faces of brick work or concrete Surafce finished even & smooth w/o using extra cement, complete all as specified and directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), using water proofing compound, complete all as specified and directed. Note :WPC will be measured and paid for separately.

M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over new plaster surfaces of walls, complete all as specified and directed.

M&L for Preparation of old distemper surface by washing, rubbing down and stopping of distemper and painted surface and applying one coat oil bound emulsion on wall surfaces white or tinted (Note wall surface made smooth and application of distemper through Mechanical mean), complete all as specified and directed.

All as per item No 71.00 above but one coat of Oil bound distemper on ceiling surfaceby ( Note wall surface made smooth and application of distemper through Mechanical mean), complete all as specified and directed.

M&L for complete removing existing treatment on wall surface and applying two coats of oil bound distemper over 1.0 mm wall care putty including chalk whiting (Note wall surface made smooth and application of distemper through Mechanical mean), complete all as specified and directed.

M&L for Preparation of old plaster surface of wall and applying One coat of apex Exterior emulsion paint on wall surface ( Note wall surface made smooth and application of distemper through Mechanical mean), complete all as specified and directed.

M&L for Preparation of old decorated plastered or unplastered wall surfaces and applying one coat of cement base paint on wall surfaces( Note wall surface made smooth and application of distemper through Mechanical mean), complete all as specified and directed.

Complete removal of existing finishes on wall and applying two coats of of cement base paint on wall surfaces ( Note wall surface made smooth and application of distemper through Mechanical mean), complete all as specified and directed.

M&L for Complete removal of existing finishes on wall and applying two coats of plastic enamel paint over a coat of primer by Mechanical mean, complete all as specified and directed.

M&L for preparing of new plastered surface and applying two coat of oil bund distemper over a coat of interior wall care putty 3mm thick, complete all as specified and directed.

M&L for complete removal of existing surface finish on wall and applying two coat of oil bund distemper ove a coat of 3mm thick wallcare putty, complete all as specified and directed. (Note : Shade will be approved by Engr-in-charge).

M&L for complete removal of existing surface finish on ceiling surfaces and applying two coat of oil bund distemper, complete all as specified and directed. (Not: Shade will be approved by Engr-in-charge)

M&L for preparation of old painted wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint , complete all as specified and directed.

M&L for preparation of old painted steel sorfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Taking up or down steel tubing and connections of 15mm bore in pipe, including cleaning for re-fixing or removal from site, complete all as specified and directed.

Taking up or down steel tubing and connections of 20mm bore in pipe, including cleaning for re-fixing or removal from site, complete all as specified and directed.

S&F of GI tubing medium grade 15mm dia incl fittings, cutting threading and fixing to walls or fixing in concealed walls or in floors etc, and making good the surfaces matching to exsiting surafaces of walls/ floor, complete all as specified and directed.

Re-fixing old steel tubing 15 mm dia and connections in new or old positions, complete all as specified and directed.

S&F of GI tubing medium grade 20mm dia incl fittings, cutting threading and fixing to walls or fixing in concealed walls or in floors etc, and making good the surfaces matching to exsiting surafaces of walls/ floor, complete all as specified and directed.

Re-fixing old steel tubing 20 mm dia and connections in new or old positions, complete all as specified and directed.

S&F in repairs 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F in repairs 75mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

M & L for repairs PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement, complete all as specified and directed.

S & F in repairs PVC (SWR) junction single, (Single T 110mm), equal or unequal with access door complete all as specified and directed.

S & F in repairs PVC (SWR) junction single, (Single T 75mm), equal or unequal with access door, complete all as specified and directed.

S&F in repairs PVC(SWR) bends, for 110mm bore pipes, with access doors, complete all as specified and directed.

S&F in repairs PVC(SWR) bends, for 75mm bore pipes, with access doors, complete all as specified and directed.

Dismantling water tanks of capacity exc 250 & n.exc 500 ltrs and removing from site to store, complete all as specified and directed.

Dismantling water tanks of capacity exc 500 & n.exc 1000 ltrs and removing from site to store, complete all as specified and directed.

S&F of Rotational moulded polythelene water storage tanks of 500 ltr capacity (cylindrical vertical with closed top) three layer hoisted and fixed in position all as specified and directed in SSR Part-I, complete all as specified and directed.

S&F of Rotational moulded polythene water storage tank triple layered (cylindrical vertical with closed top) hoisted and fixed in position on roofs, complete all as specified in SSR Part-1, capacity1000 ltrs. Make : Sintex (ISI Marked).

Refixing of Rotational moulded polythelene water storage tanks of 500 ltr capacity (cylindrical vertical with closed top) three layer hoisted and fixed in position all as specified and directed in SSR Part-I.

Refixing of Rotational moulded polythelene water storage tanks of 1000 ltr capacity (cylindrical vertical with closed top) three layer hoisted and fixed in position all as specified and directed in SSR Part-I.

S&F in repair Ball valve of brass, 20mm bore, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

Supply & fixed in repairs 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe, complete all as specified and directed. Make: Cera/Parryware/Neycer as approved.

S&F in repairs fancy type mixer for whb , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lattered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of size 15mm dia iron pipe, complete all as specified and directed. Make: Cera/Parryware/Neycer cat part no APR-CHR-101011NB as approved.

S&F in repairs fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lattered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of size 15mm dia iron pipe, complete all as specified and directed. Make: Cera/Parryware/Neycer as approved.

S&F in repair 15 mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles scrwed down suitable for 15mm bore pipe or union in repair, complete all as specified and directed. Make: Cera/Jaguar/Ess Ess as approved.

S&F in repair 15 mm dia two way fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles scrwed down suitable for 15mm bore pipe or union in repair, complete all as specified and directed. Make: CeraModel F 3002152 or equivalent in Jaquar/Hindware as approved.

S&F in repair Vitreous china white colour premium/1st quality One piece wash down water closet of size 715x375x795 mm incl all necessary accessories like rag bolts/gel gasket etc.Twin flush fittings, & Soft seat cover, complete all as specified and directed. (Make: CAPSTAN (S1013106) of CERA or equivalent in Jaquar/Hindware as approved).

S&F in repairs, Vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), but including plastic water seat cover white/cploured closed pattern with flat bottom and cover with PVC hing devise, fixing bolt for padestal pattern and cast iron 'P' or S trap, complete all as specified and directed. Make: Cera/Parryware/Neycer as approved.

S&F of health faucet brass CP (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete in all respect as specified. Make : Hindware or equivalent from Parryware/Cera F8030103 as approved by GE.

S & F of CP toilet paper holder with flat recessed type stainless steel, complete all as specified and directed.

S&F in repairs Brass CP Mixer valve for mixing hot and cold water screwed down for 15mm dia iron pipe, complete all as specified and directed.

S&F in repair 15mmdia stope cock concealed type chromium plate fancy type with long shank and cup, complete all as specified and directed. Make : Cera/Jaguar/Ess Ess as approved.

S&F in repair 15mm dia angle valve , cast copper alloy, CP, screwed down high pressure with crutch, screwed both ends for iron pipe or union s and fix in repair, complete all as specified and directed. Make : CERA Cat No F8040204 or equivalent in Jaquar/Hindware as approved.

S&F in repair sink cock fancy type complete all as specified and table mounted with 21mm swivel spout, complete all as specified and directed. Make : CERA F1015251 or equivalent in Jaquar/Hindware as approved.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed.

S&F in repair towl rack with lower hanger (stainless steel) fixed with screws, complete all as specified and directed. Make; Jaguar (Code NO AHS-1581H) or equivalent in Jaquar/Hindware as approved.

S&F in repair Brass chromium plated shower rose 125mm with swiel joints including fixing to steel pipe or union of 15mm bore, complete all as specified and directed. Make: Cera/Jaguar/Ess Ess as approved.

S&F in repair CP shower arm 15mmsize, 195mm long with bend of 4 degree with flang, complete all as specified and directed. Make : Cera/Jaguar/Ess Ess as approved.

Supply and fixing of 32/40mm waste pipe for wash hand basin and sink, complete all as specified and directed.

S&F in repair CP towel rail 600 mm long fixd with chromium plated brass screw and wooden /plastic cleats fixed in repair, complete all as specified and directed. Make: Cera/Jaguar/Ess Ess as approved.

S&F in Liqued soap container of PTMT fixed with and including Chromium plated brass screw and wooden/plastic cleats, complete all as specified and directed.

S&F in repair CP towel ring of fixed with and including Chromium plated brass screw and wooden/plastic cleats, complete all as specified and directed. Make : Hindware F880007 or equivalent in Jaquar/Cera as approved.

S&F in repair stainless steel soap dish fix to wall, complete all as specified and directed. Make : Cera -F5011106CH or equivalent in Jaquar/Hindware as approved.

S&F in repair corner glass shelf large 300x300mm of Cera or equvelent, complete all as specified and directed. Make: Cera/Jaguar/Ess Ess as approved.

S&F in repair glass shelf of size 12cm wide x60cm long for wash hand basin of Cera or equvelent, complete all as specified and directed. Make: Cera/Jaguar/Ess Ess/Hindware.

S&F in repair stainless steel plate rack 0.75mtrx0.78mtr as specified Make: Nirali/Blue star/Nikhant, complete all as specified and directed.

S&F in repair CP grating size 100mm fixed with white cement, complete all as specified and directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material

Toshi Enterprises (BID ID -3515000)

R N KHARWAR & SONS (BID ID -3515159)

OASIS CONTRACTORS BUILDERS & SUPPLIERS (BID ID -3515408)

R K CONSTRUCTION COMPANY (BID ID -3520971)

chauhan construction (BID ID -3515287)

M/S ANKIT ENTERPRISES (BID ID -3520991)

HIMANSHU TRADERS (BID ID -3520544)