Repair and renovation and additional accomodation internal work in University works department at new campus

Amount

CIVIL WORK Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material outside university campus In cement mortar

Brick work using 2nd class bricks of class designation 75 in foundation/below ground, plinth and in superstructure. All work upto floor V level. In cement mortar 1:6 (1 cement: 6 coarse sand).

--------do------- In cement mortar 1:4 (1 cement: 4 coarse sand).

P&L in position specified grade of RCC 1:1.5:3 ( 1 cement: 1.5 coarse sand: 3 graded stone aggregate 12.5/20mm nominal size) in foundation, plinth and in superstructure upto floor V level including centering, shuttering (Formwork)but excluding cost of reinforcement in:- Columns, Pillars, Posts & struts, Beams (straight or curved), rib of coffers, lintels, brackets, suspended floors, roofs (any slope), water tank, slabs of coffers, landings, balconies, shelves chajjas, lintels, bands, plain window sills, staircases and spiral staircases, arches, arch ribs, domes, vaults shells, folded plate, staircase steps including waist slab, folded steps etc. All RCC works upto floor V level complete in all respects. Nothing extra shall be paid for any additional height of formwork.

Providing steel thermo mechanically treated bars for all RCC work including bending, binding and placing in position complete including cost of steel reinforcement and binding wire 18-20 gauge, soft drawn concealed steel binding wire complete as per specifications and drawings. All work upto floor V level.

Half brick masonry with brick of class designation 75 in foundation, Plinth & Superstructure in Cement mortar 1:4(1 cement : 4 sand) including cost of scaffolding, curing etc complete . All work upto floor V level.

Extra for providing and placing in position 2 Nos. 8 mm dia TMT bars at every third course of half brick masonry (with FPS bricks)

10-15 mm cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) for interior plastering. All work upto floor V level.

10-15 mm cement plaster with cement mortar 1:4 (1 cement : 4 fine sand) for exterior plastering. All work upto floor V level.

6mm cement plaster to ceiling of mix: 1:3 (1 cement : 3 fine sand). All work upto floor V level.

Providing and laying 40 mm thick cement concrete 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) under tile flooring including leveling, consolidation, curing etc. complete.

Providing and laying 50 mm thick cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) including applying a floating coat of neat cement slurry finished neat.

Removing dry or Oil Bound Distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth incl. necessary repair to scratches etc. complete

Repairs to plaster of thickness 12mm to 20mm thickness by way of dismantling old plaster, cutting the patch in proper shape, preparing and plastering the surface of the walls/ceiling complete including disposal of rubbish/mulba outside the University Campus. With Cement Mortar 1:4 (1 cement : 4 sand)

Finishing plastered surface with wall care putty (Birla/ JK) including sand papering and preparing the surface even and smooth (two or more coats) complete job. Nothing extra shall be paid on account of scaffolding/ form work etc. All work upto floor V level.

Distempering with oil bound washable distemper (two or more coats) of approved brand and manufacture and of required shade on undecorated wall/ ceiling/slopping surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture (Make Asian/Nerolac). All work upto floor V level.

P/F 8-10 mm thick Ist Quality vitrified tiles 600 x 600 mm size of approved make (Kajaria/RAK) laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 sand) of any shade and colour as per the approval of the Engineer Incharge on floors/skirting with thick cement slurry joints finished with white cement mixed with pigment to match the shade of the tiles including tucking /roughening the old concrete floor etc. complete.

Providing and fixing of Ist Quality ceramic glazed floor tiles 300x300mm/400x400 mm size (Anti-skid) conforming to IS 13755 (Kajaraia/Orient/Somany) of any colour as required/approved by the Engineer-in-charge laid on 20mm thick bed of cement mortar 1:4 including pointing the joints with white cement and matching pigment complete. Nothing extra shall be paid for laying tiles where they are require to be cut. All works upto floor V level.

P&F 1st quality Ceramic glazed wall tiles 250x400mm/300x450mm/300x600mm Conforming to IS: 13755 of min. thickness 5mm of approved make (Kajaria/ORIENT/Somany) and colour / shades as required in skirting, risers of steps and Dados over 12mm thick bed of C: M 1:3 & jointing with Grey cement slurry @ 3.3kg/sqm including finishing the joints with white cement mixed with pigment to match the shade of the tile complete. Nothing extra on account of wastage shall be paid. All works upto floor V level.

Finishing exterior wall with acrylic smooth exterior paint (Apex/ Excel) with silicone additives of required shade on new work (two or more coats) applied @ 1.67 litre/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10sqm). All work upto floor V level.

Painting one or more coat with ready mixed synthetic enamel paint of approved brand and manufacture (Make Asian/Nerolac) to give an even shade on wood/steel surface.

Providing Salwood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position including applying a coat of wood primer and then two or more coats with synthetic enamal paint of approved brand and manufacture (Make Asian/Nerolac).

Demolishing Brick Tile Covering in terracing including stacking of serviceable material and disposal of unserviceable material from the site outside the University Campus.

Demolishing mud phuska in terracing including stacking of serviceable material and disposal of unserviceable material from the site outside the University Campus.

100 mm thick (average) mud phaska of damped brick earth on roof laid to slope consolidated and plastered with 25 mm thick mud mortar with bhusa at 35 kg per cum. of earth and gobri leaping with mix 1:1 ( 1 clay : 1 cowdung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% integral water proofing compound by weight of cement and finished neat.

Providing angular fillets 75cm x 75 cm cement concrete 1:2:4 (1 cement: 2 sand : 4 crushed aggregate 20 mm nominal size). Incl. finishing with cement mortar 1:3 (1 cement: 3 sand) as per standard design in 75cm x 75 cm deep chase.

Making khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) over PVC sheet 1mt x 1mt x 400 micron finished with 12mm cement plaster 1:3 ( 1cement : 3 coarse sand) and a coat of neat cement . Rounding the edge and making and finishing the outlet complete.

Providing and fixing on wall face unplasticised - rigid PVC rain water/sewer line pipe conforming to IS - 13592 type A including jointing with seal ring conforming to IS :5382 leaving 10mm gap for Thermal expansion. ( 4kg/cm2 pressure of make supreme/Uniplas/Astral) 75 mm dia

--------do----- 110 mm dia

--------do----- 150 mm dia

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. PVC Clip 110 mm

Providing and fixing on wall face unplasticised -PVC moulded fittings/accessories for unplasticised - Rigid PVC pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. PVC Bend 110 mm

Providing & fixing ISI marked flush door shutters non decorative type, core block board construction with frame of 1st class hard wood & well matched commercial 3 ply veneering with vertical grains or cross bands & face veneers on both faces of shutters -35mm thick including ISI marked bright finished MS butt hinges with necessary screws including applying a coat of wood primer and then two or more coats with synthetic enamal paint of approved brand and manufacture (Make Asian/Nerolac). All work upto floor V level.

P/F of 35mm thick IInd class Teak wood glazed shutter for window/clerestory windows as per required drawing, design and specification with necessary M.S butt hinges with screws including providing and fixing of 4 mm thick glass panes of approved quality with necessary beading and sash bar including applying a coat of wood primer and then two or more coats with synthetic enamal paint of approved brand and manufacture (Make Asian/Nerolac). All work upto floor V level.

Providing and fixing 35mm thick 2nd class Teak wood wire gauge shutters using galvanized MS wire gauge of average width for aperture 1.4 mm in both direction with wire of dia 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished MS butt hinges with necessary screws etc complete including applying a coat of wood primer and then two or more coats with synthetic enamal paint of approved brand and manufacture (Make Asian/Nerolac). All work upto floor V level.

P/F of PVC Paneling of required design and make (as approved by Engineer-in-charge) on walls including cost of G.I Channel on back side, nails, screws and labour for fixing of panelling complete.

Providing and fixing of 19mm thick ply board (termite resistant and waterproof) of Green/Century Make for almirah including necessary screws, fevicol etc. complete including applying a coat of wood primer and then two or more coats with synthetic enamal paint of approved brand and manufacture (Make Asian/Nerolac). All work upto floor V level.

P/F of 1 mm thick Sunmica (Green/Bloom make) including cost of nails, fevicol and labour etc. complete.

P/F of 6mm ply (ISI Make) including cost of nails, fevicols, wastage etc. complete

Providing and laying APP (make Texsa/sika/Pidlite) modified prefabricated five layer 3mm thick water proofing membrane, black finishing reinforced with non - woven polyester mat consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr /Sqm. by the same membrane manufacture of density at 25 degree C, 0.87 - 0.89 kg/ ltr. and viscosity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of membrane shall be: joint strength in longitudinal and transverse direction at 23 degree C as 650/450N/5cm.Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150 degree C. cold flexibility shall be upto - 2 degree C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane.

Earth work in excavation in all kinds of soil in bulk evacuation and foundation trenches pits including stacking soil neatly away from the edges, filling back by the sides of foundations and plinth in 150 mm thick layers, ramming, watering and consolidation complete including disposal of Surplus earth outside University Campus.

Providing and laying cement concrete 1:5:10 ( 1 cement: 5 coarse sand: 10 grade crushed stone aggregate 40mm nominal sizes) in foundation and under flooring including machine mixing, finishing, consolidation, curing and form work complete.

Providing and laying cement concrete 1:5:10 ( 1 cement: 5 coarse sand: 10 grade crushed brick aggregate 40mm nominal sizes) in foundation and under flooring including machine mixing, finishing, consolidation, curing and form work complete.

Steel work welded in built up section in door window frames, grill, railing etc. by using angle iron, square bar, M.S pipe including applying a coat of steel primer and then two or more coats with synthetic enamal paint of approved brand and manufacture (Make Asian/Nerolac) All work upto floor V level.

Making plinth protection with 50mm thick cement concrete 1:3:6 (1 cement : 3 sand :6 crusher stone aggregate 20mm nominal size) laid over 75 min bed of dry brick aggregate 40 mm nominal size, rammed, consolidated and grouted with fine sand including making grooves as required, necessary formwork, curing etc complete.

Supply & filling dry brick aggregate 40 mm nominal size, rammed, consolidated and grouted with fine sand.

SANITARY WORK Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design:-With F.P.S. bricks with class designation 75. Inside size 90x80cm and 45cm deep including C.I cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover 23 kg and weight of frame 15 kg) FOR SEPTIC TANK

Extra for raising height of Manhole

Cleaning of manholes including clearing of drain pipes from the manhole to manhole and making the lines fully functional including disposal of mulba from the site outside the University Campus

P/F G.I. pipes complete with G.I. fittings (Medium Grade) & clamps including cutting holes/chases in walls and making good the same/earth work in trenches (Prakash Surya/Jindal) 15 mm nominal bore

------------do------------- 20 mm nominal bore

P/F Ball Valve (Full way valve) made of cast brass including handle of approved quality. 15 mm nominal size

------------do------------- 20 mm nominal size

P& F white vitreous china pedestal type (European type/wash down type) water closet pan (Parry ware /Hind ware /Cera)

P&F 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C. P brass screws & washers complete.

P/F of PTMT bib cock ‘Prayag Make’ 15 mm (nominal size) 86 mm long weighing not less than 88 gms.

P/F CP brass angle valve for basin mixture Geyser points/washbasins of ‘Parko/Jainco/Chilly Make’ 15mm nom. Bore

P/F PTMT angle valve/stop cock for basin mixture Geyser points/washbasins of ‘Prayag Make’ 15mm nom. Bore, 86 mm long weighing not less than 88 gms.

P/F of unplasticised PVC connection pipe with bass union 45 cm length & 15 mm nom. bore.

P/F white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm & 340 x 410 x 265 mm sizes resp.

Providing and fixing PTMT towel rail including end brackets cost of wooden/PVC plugs with screw complete of size 600 x 20 mm of approved make. (Prayag Make).

Providing and fixing PTMT soap dish of approved quality and make. (Prayag Make).

Providing and placing on terraces Polyethylene water storage tank ISI: 12701 marked with cover & suitable locking arrangement & making necessary holes for inlet outlet & overflow pipes but without fittings of Sintex/Star/ Lotus make.

P/F PTMT Grating (Prayag Make) 100mm dia circular type

P& F CP jet with PVC pipe to be fixed with WC

P/F PTMT Ball cock of approved quality, colour and make complete with Epoxy coated rod with LP/HPHD plastic balls 20 mm nominal bore, 120 mm long wieghing not less than 198 gms

P&F PVC waste pipe for sink or wash basin including PVC waste fittings complete. Semi Rigid pipe 32/40 mm dia

P&F of G.I union in G.I pipe including cutting and threading the pipe and making long screws etc. complete (New work). 15 mm nominal bore

----------do---------- 20 mm nominal bore

P&F of PTMT Shelf 440 mm long, 124 mm width and 36mm height of approved quality and colour weighing not less than 300 gms.

P&F of white vitreous china pedestal water closet (Eurpoean Type W.C Pan) with seat and lid, 10 ltr. Low level white PVC flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS: 7231 with all fittings & fixtures, PVC connections with brass union of 45cm length, 15 mm nominal bore, C.P Jet with PVC pipe to be fixed with W.C including cutting and making good the walls/floors etc. as required. Complete Job (Make Parryware/Hindware/Cera)

P&F wash basin with C.I/M.S brackets, 15mm C.P brass pillars, 32mm C.P brass waste of standard pattern, 32mm/40mm brass waste coupling including painting of fittings and brackets, cutting and making good the walls as required. White Vitreous China washbasin (Make Parryware/Hindware/Cera) Size 630 x 450 mm with a single 15mm C.P brass pillar tap (Make Parko/Chilly)

Brothers & Co

RAJ KUMAR SALGOTRA

M/S KAMA DEV SAMAL