COMPREHENSIVE WELCOME MAINT SERVICES IN HPP DUNN MARG GEN ROAD AND MALL ROAD OFFRS MD ACCN IN THE AREA OF AGE BR II UNDER GE MAINT INF SCHOOL MHOW

Amount

M&L for preparation of old decorated surfaces of wall including brooming, washing, rubbing scraping down with complete removal smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of white wash on walls complete all as specified and directed.

All as per item No. 1.00 above but on ceiling surfaces.

M&L for preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying two coats of oil emulsion distemper complete all as specified and directed.

M&L for complete removal of existing treatment on old decorated surface of wall and applying two coats of oil emulsion distemper white/coloured over one coat of wall care based putty (where it is required) complete all as specified and directed by Engr-in-Charge. Note:- Putty shall be measured and paid seperately.

M&L for preparation of old decorated surfaces of wall including brooming, washing, roubbing scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and apply one coat of oil emulsion distemper complete all as specified and directed.

M&L for preparation of old painted surfaces of wood/wood based materials exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per item No. 6.00 above but on steel surfaces.

M&L for one coat of 1.50mm thick wall care putty on walls/ceiling complete all as specified and directed.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store yard and rubbish of the primeses complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base, levelling course, etc complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone crushed stone aggregate) as in flooring complete all as specified and directed.

M&L for non-skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over coloured tiles and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for non-skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for scratch free vitrified ceramic tiles 10mm thick (square or rectangular) area of each tile (dark shade)exceeding 0.36 sqm not exceeding 0.42 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

All as per item No 15.00 above but as in skirting/ dado etc over and including 10mm thick backing coat in cement mortar 1:4 on wall complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 450x350x7 mm thick on vertical surfaces such as wall, dado, skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match coloured tiles over and including 10 mm thick backing coat on fair faces of brick work in cement mortar 1:4 complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, sub base of floor, etc complete all as specified and directed

M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in floor/ plinth protection finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for 20 mm thick granite (black) thick machine cut, 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing of approved quality of any size set and jointed in grey cement slurry laid over and including 10 mm thick backing in cement mortar (1:4) including granite polish to be done by mechanical grinder and moulding edges compete all as specified and directed.

S&F in repairs of 500 ltrs capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I compete all as specified and directed.

S&F in repairs of 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I compete all as specified and directed.

Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 250 ltr but not exceeding 500 ltr complete all as specified and directed.

All as per item No 24.00 above but exceeding 500 ltr but not exceeding 1000 ltr capacity complete all as specified and directed.

S&F in repairs of 15mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 15mm-142 gms) compete all as specified and directed.

S&F in repairs of 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 20mm-210 gms) compete all as specified and directed.

Taking up or down 15 mm dia old serviceable / unserviceable steel tubing any grade and connections cleaning for re-fixing or removal to store complete all as specified and directed .

All as per item No 28.00 above but 20mm bore complete all as specified and directed.

S&F 15mm bore pipes steel tubing medium grade, galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc complete all as specified and directed.

All as per item No 30.00 above but 20mm bore complete all as specified and directed.

S&F in repairs 15 mm CP long neck bib taps screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bib taps cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe complete all as specified and directed.

S&F in repairs stop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified and directed.

S&F in repairs pillar taps (swan neck type) cast copper alloy with capstan head, screwed down, high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified and directed.

S&F in repairs 15 mm stop cock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs CP wall mixer for mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified and directed.

S&F in repairs 15 mm wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed complete all as specified and directed.

S&F in repairs concealed stop valves fancy type chromium plated with long shanks and cup fixed with 15 mm dia bore pipes complete all as specified and directed.

S&F in repairs stainless steel sink, 1.00mm thick for kitchen, with plug, washers and wastes/coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mmx 330mmx 160mm fixed with PVC waste pipe complete all as specified and directed.

S&F in repairs stainless steel sink with drainage board , 1.00mm thick for kitchen, with plug, washers and wastes/coupling,waste pipe etc including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed.

S&F stainless steel plate rack for kitchen 1 mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed by Engineer-in-Charge. Note:- Size of plate rack should not be less than 900x1200 mm and weight of rack shall not be less than 8.5 Kg each.

S&F in repairs PVC low level flushing cistern of 10 Litres with all internal fittings incl flush pipe and fixing to supply pipe complete all as specified and directed.

Taking down and re-fixing WHB/flushing cistern/EWC/ kitchen sink and similar items at same or other location, including cutting for ends and pinning in and ends of brackets or erecting stand but exclusive of fixing of supply and waste pipes,etc complete all as specified and directed.

S&F in repair vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified and directed.

S&F in repairs vitreous china squatting pan `Orissa ' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe etc and lime concrete bedding including 'P' or 'S' trap complete all as specified and directed.

S&F in repairs health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and directed.

S&F in repairs flexible type PVC waste pipe 32 mm bore of pipe for WHB/SINK/urinal, etc complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and directed.

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc complete all as specified and directed.

S&F in repairs CP towel ring, dia not less than 200mm complete all as specified and directed.

S&F in repairs 125 mm size chromium plated shower rose with siwel joint suitable for 15 mm bore GI pipes complete all as specified and directed.

S&F in repairs plastic water closet seat cover in white colour, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete all as specified and directed.

S&F in repairs CP Jet spray suitable for 15mm bore with 1m lenght pipe and connecting pieces including all necessary fittings and accessories complete all as specified and directed.

S&F in repairs wash basins, vitreous China white flat back size 580x450mm size, including cutting for and pinning in ends with & including MS adjustable brackets or erecting stand complete all as specified and directed.

S&F in repairs pedestal wash basins, vitreous China white flat back size 580x450mm size, including cutting for and pinning in ends with & including MS adjustable brackets or erecting stand complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs corner glass shelf (with bracket) complete all as specified and directed.

S&F in repairs 150 mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F in repairs CP grating 100mm dia complete all as specified and directed.

S&F in repairs 25 mm dia aluminium powder coated drappery curtain rod with brass /nickel chrom polish bracket complete all as specified and directed .

S&F in repairs 25 mm dia aluminium powder coated drappery curtain brackets of brass /nickel chrom polished all as specified and directed .

S&F in repairs CP waste coupling of size 32 mm dia WHB with long screwed shanks and fly nut complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutter of any discription not exceeding 1.00 sqm each complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutter of any discription exceeding 1.00 sqm but not exceeding 2.00 sqm each complete all as specified and directed.

S&F in repairs 100mm aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.

All as per item No 70.00 above but 150mm

S&F in repairs aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruted section and fixing bolt and sliding bolts of extruded section and cast aluminium alloy 300 mm long complete all as specified and directed.

S&F in repairs 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed.

S&F in repairs 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F in repairs 75 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F in repairs 50mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar 1:4 ,cutting depth not exceeding 10 cm complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed

Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed.

M&L for brickwork with sub class 'B' modular bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work in cement mortar 1:4 with using sub class `B ` modular half brick work straight or curved on plan to any radius complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on wall/ concrete surfaces finish even and smooth without using extra cement using water proofing compound compound complete all as specified and directed. Note: Water proofing compound shall be measured and paid seperatly.

M&L for 5 mm thick plaster on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.

Supply only Liquid water proofing compound complete all as spesified and directed.

M&L for applying two coats of oil bound distemper over and including a coat of 1-2mm thick wall care putty (JK/Birla) on new plastered surface of walls after preparation of surfaces complete all as specified and directed.

M&L for preparation of newly plastered surface and using sand paper to have even and smooth surface and applying 1-2mm thick JK/BIRLA white putty on prepared surface and applying two coats of weather coat paint (Weather coat Exterior emulsion) manufactured by Berger' or Asain Apex white or tinted over a coat of white water base primer complete all as specified and directed by Engr- in- Charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of cement primer complete all as specified and directed.

M&L for preparing new surfaces of wall and applying three coats of white wash on ceiling and cornices complete all as specified and directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exceeding 1.50 but not exceeding 4.00 sqm each complete all as specified and directed.

Taking down shutters of any description not exceeding 1.00 sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2 sqm each complete all as specified and directed.

S&F 2nd class hard wood as in plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class hard wood plain, framed pannelled shutters factory made (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per (IS : 1003 complete all as specified and as directed.

S&F 30mm thick factory made, 2nd class hard wood,glazed and skeleton window/ventilator shutters, open repeated and prepared to receive glass,gauze etc (with sash bars) edges of framing plain, chamfered or rounded ,fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24 (b) and for window and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

S&F 2nd class Hard wood 35 mm thick glazed and skeleton(doors) shutters, open rebated and prepared to receive glass gauge etc, (with sash bars) edges of framing plain, chafered or rounded , fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part I, Section 8, clause 8.2 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., size of frame 125 x 60 mm complete as specified and directed.

M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete as specified and directed.

M&L for preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete as specified and directed.

S&F galvanised mild steel wire cloth of 0.56 mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised wire staples,etc complete as specified and directed.

S&F in repairs galvanised mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised wire staples,etc complete as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 75 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 50 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 150 mm long aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.

S&F 150mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as spd and directed.

S&F 125mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as spd and directed.

S&F 100mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as spd and directed.

S&F 150mm aluminum alloy handles fabricated anodised complete all as specified and directed.

S&F 150mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F 100mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F 75mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate, etc complete all as specified and directed.

S&F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours articles n exc 200 Cu.cm each complete all as specified and directed.

S&F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be two part as upper part shall be three movable shutter and lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in cement mortar 1:3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-Charge:- (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min) (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(Min) (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(Min) (iv) 4 mm thick glass superior quality.(Min) (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos.(Min) (vii) Sliding rollers per shutter - 02 Nos.(Min) (viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos. (Ix) fixing screw for frame with wall per windows- 08 Nos.

S&F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in cement mortar 1:3 finishing even and smooth complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Prelam colour having density of 600kg/cbm manufactured by an ISO 9001-2015 certified company.Termite proof, water proof and flame retardant PVC sheet,manufactured by single layer extrusion process for one side prelaminated solid PVC foam sheet. PVC film laminate should be pasted on PVC sheet with suitable adhesive and approved shade complete all as specified and directed.

S&F in repairs stainless steel self closing hinge of 75 mm size for PVC door shutter complete as specified and directed.

S&F in repairs 100 mm size MS mat / glossy finish handle complete as specified and dirceted.

S&F in repairs 50 X 15 mm size magnet door catcher for closing for PVC door shutter complete as specified and directed.

S&F in repairs mild steel drawer cabinet channel for moving the drawer etc complete as specified and directed.

S&F in repairs modular type stainless steel basket size 0.50 m x 0.53 m x 0.10 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arranement complete as specified and dirceted.

All as per item No 127.00 as above but basket size 0.50 m x 0.53 m x 0.15 m complete as specified and dirceted.

All as per item no 127.00 as above but basket size 0.50 m x 0.53 m x 0.21 m complete as specified and dirceted.

S&F in repairs 40mm dia cupboard knobes fixed with nuts, screw and washer of MS, bright finshed complete as specified and dirceted.

S&F in repairs of floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor complete as specified and dirceted.

S&F in repairs Mild Steel Door Spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete as specified and dirceted.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty of fixed with beads including and S&F sheet glass plain ordinary quality 3.00 mm thick and glazing with oil putty/Bead not exc. 0.50 sqm in each pane complete all as specified and directed.

M&L for sheet glass 3.00 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 Sqm in each pan and fixed complete all as specified and directed.

M&L for figured glass pine head type 3.00 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 Sqm in each pan and fixed complete all as specified and directed.

S&F in repairs galvanised stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and directed.

M&L for preparing new or previously untreated surfaces of wood and wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer with and including wood putty acomplete all as specified and directed.

M&L for 18/19 mm thick prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed in repairs with screws to timber frame work, etc complete all as specified and directed.

M&L for 2nd class hard wood plain fillet, squre, rectangular in section beads, straight exceeding 3 & not exceeding 6 Sqcm) for glazed or gauzed joinery, renewed, including mitres etc fixed in repairs complete all as specified and directed.

M&L for 2nd class hard wood plain fillet, squre, rectangular in section Beads, straight exceeding 13 & not exceeding 25 Sqcm) for glazed or gauzed joinery, renewed, including mitres etc fixed in repairs complete all as specified and directed.

S&F in repairs stainless steel hinges for modular kitchen shutters complete all as specified and directed.

S&F in repairs powder coated aluminium door seals 120 cm in length and 3 cm in width with rubber guasket at bottom of door seals for fixing to door complete all as specified and directed.

M/S Parikshit Sharma (BID ID -3115810)

M/S Sunshine Construction (BID ID -3126422)

RK CONSTRUCTION (BID ID -3115681)

PARIDHI CONSTRUCTION (BID ID -3114620)