ADDN/ ALTN AND RENOVATION TO TOILET BLOCK OF KV NO.1 AT AFA HYDERABAD

Amount

Demolition of Brick/stone masonry built in cement mortar of any description, etc complete all as specified and as directed

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for foundation, filling and mass concrete complete and including removing rubbish off the permises complete all as directed.

Taking down chowkats or steel window /ventilators /door frames with shutters (without taking off shutters from frames) not exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or steel /wooden/aluminium window /ventilators /door frames with shutters (without taking off shutters from frames) exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for RCC tanks/RCC Chajja/Roof projections etc complete all as specified and as directed. (Reinforcement cut as required to facilitate demolition)

Dismantling floor hearth or existing wall tiling incl cement mortar bedding (but not backing) including removal of debris from the site, etc complete all as specified and as directed

M&L for Forming jambs, etc. to openings in Cement mortar 1:4 or cement lime mortar 1:2:9, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified.

M&L for Making good under cills or over arches, lintels and bressummers in Cement mortar 1:4 or cement lime mortar 1:2:9. including allpinning when necessary cmplete all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) etc complete all as specified and as directed.

Taking up or down upto 25 mm bore of pipe steel tubing and connections, including for refixing or removal etc complete all as directed.

Excavating in trenches n. exc 1.5 m width and n. exc 1.5 m in depth for foundation or etc or for shafts , wells , cesspits , manholes , pier holes etc n exc 10 sqm on plan and n exc 1.5 m in depth orgetting out in any type of soil, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick of excavated soil complete all as specified and as directed.

Removal of excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

M & L cement concrete in foundation, filling and mass concrete type D-2, 1:4:8 mix using 40 mm graded stone aggregate, completed all as specified and directed.

M&L for pre-cast cement concrete block masonry of type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:4 etc complete all as specified and as directed.

Formwork to sides and soffits of floors or roof beams, beam haunchings, gerders, bressummers, lintels, cantilevers, shalves including supports etc. and similar work, of rough finished flat surface of concrete, complete all as specified and directed.

M & L Providing Reinforced cement concrete (Design mix M-25), as in Beams, lintels over 1.50m span , and similar works etc completed all as specified and directed.

Formwork to chajjas, troughs and similar items including edges complete all as specified and directed.

M & L Providing Reinforced cement concrete (Design mix M-25), as in Slabs supported on wall beams and in chajjas all as directed .

M&L for precast reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), as in man holes cover slabs, etc including necessary form work set in CM 1:4 , complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

M&L for mild steel TMT bars 6 to 8 mm dia and over, cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

S&F mild steel TMT bar 6 mm to 8 mm dia. and over, cut to length , bent to shape as required, hooking ends and bining with and including mild steel wire (annealed) not less than 0.9 mm dia. Used in stirrups, spacers and binders, complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketted in any length with rubber ring joints laid in trenches or floors etc complete all as specified and as directed

S&F PVC (SWR) pipes 110 mm bore single socketted in any length with rubber ring joints fixed to walls,, etc complete all as specified and as directed

S&F PVC (SWR) pipes 75 mm bore single socketted in any length with rubber ring joints laid in trenches or floors or in walls, etc complete all as specified and as directed

S&F PVC (SWR) pipes 75 mm bore single socketted in any length with rubber ring joints fixed to walls, etc complete all as specified and as directed

S&F PVC (SWR) bends any radius suitable for 110mm bore pipe, etc complete all as specified and as directed

S&F PVC (SWR) bends with oval access doors any radius suitable for 110mm bore pipe, etc complete all as specified and as directed

S&F PVC (SWR) branch piece, 110mm,single (single Y or T) equal or unequal etc complete all as specified and as directed.

S&F PVC (SWR) branch piece , 110mm, Double (double Y) equal or unequal etc complete all as specified and as directed.

S&F PVC (SWR) 'P’ trap110mm etc complete all as specified and as directed.

S&F PVC (SWR) bends any radius suitable for 75mm bore pipe, etc complete all as specified and as directed

S&F PVC (SWR) bends with oval access doors any radius suitable for 75mm bore pipe, etc complete all as specified and as directed

S&F 75mm dia PVC (SWR) floor/nahani trap plain with grating including jointing with solvent cement and jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as specified and as directed.

Supply and fix Salt glazed stoneware gully trap, type Q 125x100mmmm, complete all as specified and as directed.

S&F 15 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors etc complete all as specified and as directed.

Cutting chases, pinning in stone or brick walls and making good to facings where required and pointing in cement mortar 1:3 and cutting not exc 10 cm girth etc complete all as specified and as directed.

S&F 20 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors etc complete all as specified and as directed.

S&F 25 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors etc complete all as specified and as directed.

Taking down cement plaster on Brick or Stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for Rendering 15 mm thick on concrete or brick work surfaces in CM 1:6, finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for Rendering 15 mm thick on concrete or brick work surfaces in CM 1:4, finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:3 on concrete surfaces as ceilling finished even and smooth (without using extra cement) of any description and in any position, with necessary scaffoldings complete all as specified and as directed by theEngineerin-Charge.

M & L 25 mm thick cement concrete type B-1, 1:2:4 mix, ( 20 mm graded aggregate ) as in sub base of floor finishes, complete all as specified and directed.

M&L Joint free Non Skid ceramic colour tiles of premium quality 7 to 8mm thick,(square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour etc complete as specified.

M&L for Screed bed or bedding layer of cement mortar (1:6) 15mm thick for laying floor tiles/floor finishes.

M&L for rendering 10mm thick in cement mortar 1 : 4 on brick or concrete surfaces to receive as backing of wall tiling etc complete all as specified and as directed.

M&L Joint free Glazed coloured ceramic tiles of digital quality in vertical surface 450X300X7-8mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match (Note: Colour of tile will be finalized by Engr-In-Charge)

S&F Powder coated aluminium ventilators of any size, and any type as directed made out of anodised aluminium extruded section of thickness not less than 1.50 mm, suitable aluminium hinges, aluminium tower bolts, rubber gasket, aluminium beading, suitable fancy type handles and including all other required fittings as per standard engg. practice, complete all as specified and directed.

S&F Powder coated (Thickness not less than 50micron) Aluminium anodised Grill, aperture n exc 75 mm ,size 6mm x 4mm thick, including 1 mm thick channel fixed with steel screws complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, etc complete all as specified and as directed

S&F 4 mm thick frosted glass, pin head type and glazing with oil putty in squares n .exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in -Charge.

Demolition of cement concrete or surkhi filling of any description and in any position not otherwise specifically provided for Roof treatment and in sunken treatment etc complete all as specified and as directed.

M&L Cement concrete type B-1 1:2:4 (20mm graded aggregate) in roof padding concerte of average 50 mm thick with liquid water proofing compound as per manufacturers instructions etc complete all as specified and as directed. Note: WPC will be measured & paid separately under relevant Item

M & L Cement concrete type B-0 1:2:4 (12.5mm grades aggregate) in haunching concrete etc complete all as specified and as directed

M&L for Rendering 10mm thick in cm 1 : 3 mixed with liquid water proofing compound as per manufacturers instructions on concrete surfaces when PCC on roof surface is still green including finished even and fair etc complete all as directed Note: WPC will be measured & paid separately under relevant Item

Cleaning the roof surfaces and applying oil bound bitumen primer @0.20 Kg per Sqm providing and laying 4mm thick APP modified water proofing membrane weight not less than 4 Kg per Sqm reinforced with non woven polyster mat weight not less 160 gm per Sqm having softening point not less than 140 Degree centgrade, lengitudinal tensile strength not less than 800N per 5 cm teasing strenght of 180N with minimum of 10 cm side laps and 15 cm end laps by application of torch. Applying a coat of blown grade hot bitumen over the membrane @ 1.20 kg/sqm as per manufacturer instructions complete as directed

M&L for applying one coat of solar reflective bituminous Aluminium paint over a surface of APP water proofing membrane @ 0.1 Kg/Sqm etc complete all as specified and as directed.

PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate 25 mm thick mixing with WPC as in bedding of sunken portions with smooth finish etc complete all as specified and directed. Note: WPC will be measured & paid separately under relevant Item

M & L rendering 10mm thick on brick or concrete surfaces in CM (1:3), mixing with liquid water proofing admixture as per manufacture's instruction as in sunken portion complete all as specified and directed. Note: WPC will be measured & paid separately under relevant Item

M&L for cleaning of surface thoroughly from dust projection and dirt by wire brushing and applying a coat of blown bitumen 85/25 @ 1.2 kg/sqm over a coat of bituminous primer and over that laying water proofing treatment of APP based polymeric membrane minimum 3mm thick and 3 kg/sqm reinforced with polyster nonwooven fabric weight not less than 150 gm/sqm laid by forced application in sunken portion all as specified and as directed

M & L PCC 1:5:10 type E-2 using 40 mm graded brick aggregate as in filling of sunken portion etc complete all as specified and directed. .

S&F in repairs 40mm High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 in spouts as in sunken floor etc complete all as specified and as directed.

S&F in repairs Vitreous China squatting pan "Orrissa Pattern", size 580x440mm, white with integral foot rests including CI 'P' or 'S' fixed in repairs including connections to trap with insertion of PVC (SWR) pipes of required length as per site requirements and to flushing pipe, anti-syphonage pipe etc, including making good to floor finish, complete all as specified and directed

S & F Vitreous china, premum / 1st quality wash down water closet wall hung EWC white / ivory / off white, closed pattern incl all necessary accessories like rag bolts / gel gasket ec. (excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to fushing pipe, antisyphonage pipe,Health faucet ABS body with 1 meter SS braided connection pipe and two way bib tap of make : Cera Cat. No. F8030109AB or equivalent etc, complete all as specified and as directed.

S&F in repair 10 lts PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets High or low level fluslhing cistern (exclusive of brackets), and connections to pipes including long bends etc complete all as specified and as directed.

Supply only Liquid water proofing compound.

S&F 1000 ltrs of capacity Rotational moulded polyethylene water storage tanks with cover (cylindrical vertical with closed top) hoisted and fixed in position etc complete all as specified in SSR Part I and as directed.

Supply and fix 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weigh 455 gms) complete all as specified and as directed.

S&F of Gun-metal globe or gate valves 20mm bore dia with iron wheel head, screwed both ends for iron pipes etc complete all as specified and as directed.

S&F of Gun-metal globe or gate valves 25mm bore dia with iron wheel head, screwed both ends for iron pipes etc complete all as specified and as directed.

S&F Bib taps, CP fancy type with capstan head screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe etc complete all as specified and as directed

S&F stop valves / Angle cocks 15mm dia CP fancy type with capstan head screwed down high pressure screwed both ends for iron pipe or for unions, of 15mm bore etc complete.

S&F PVC connection 15mm size with brass CP nuts of length 450 mm etc complete all as specified and as directed.

S&F in repairs of High density polyethylene pipes 32mm(HDPE) with collar of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

S&F stainless steel grating hinge type 100 mm dia complete all as specified and directed by Engr -in- charge. Make : Cat Part FG92/93 of Pearl / Precision or equivalent

Supply and fix Brass CP fancy tubular towel rail of 20 mm dia, D type 600 mm long between flanges, including brackets complete all as specified and as directed.

S&F in repairs of Vitreous china wash basin, white flat back of size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper, support walls but including RCC shelves and granite counter of approximate size (1000 mm x 600 mm)supported on walls and suitable bottle trap etc complete all as specified and directed by Engr -in- charge at site. Note:-(Thickness of granite will be 18 to 20 mm and is to be provided on top and front of counter and also on support walls vertical surfaces.)

S&F of Waste coupling of 32 mm chromium plated for glazed ware basins with long screwed shanks and fly-nuts etc complete all as specified and directed by Engr -in- charge.

S&F Pillar taps 15 mm dia, cast copper alloy, Long nose , chromium plated fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and capston head, screwed for iron pipe of 15 mm bore etc complete all as specified and as directed.

S&F PVC waste pipe 32 mm bore, 900 mm long etc complete all as specified and directed by Engr -in- charge.

S & F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S & F 30mm thick factory made flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

Material and labour applying two coats of synthetic enamel paint over a coat of pink primer on new wood and wood based surfaces of any description including preparation of surfaces, not otherwise described over 10 cm width or girth complete all as specified and as directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc all as specified and as directed

S&F Factory made solid PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C' type GI or 40 x 20 x 19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing etc all as specified and as directed

Supply and fix butt hinges of 100mm size, medium weight cold rolled mild steel and fixed etc complete all as specified and as directed.

Supply and fix aluminium alloy butt hinges of 100mm size, and fixed etc complete all as specified and as directed.

Supply and fix 150mm long extruded aluminium alloy handles, cast type anodised complete all as specified and as directed.

Supply and fix tower bolt 150mm long, extruded aluminium anodised complete all as specified and as directed.

Supply and fix 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for SGSW drain pipes complete and including removing rubbish off the permises complete all as directed.

Demolition and breaking up drain / sewage pipes 150 mm dia, (Salt glazed ware, AC or Reinforced concrete) set in concrete mortar, complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) for concrete bed of 10cm thick, to drain pipes of 150 mm dia,including packing under, and hunching against the sides of pipes after they are laid and tested, complete all as specified and as directed.

M&L for 150 mm dia pipe (Grade ‘A’ pipe) Salt glazed stone ware drain pipes laid in trenches and jointed in CM 1:3 complete all as specified and directed.

Cutting into existing manholes for connecting new drain of 150 mm dia, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1 / 2 round or 3 / 4 section) in cement concrete 1:2:4 type B-1, smooth finished, and reforming benching as required, complete all as specified and as directed.

Demolition, breaking up and removal of 100mm dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar and in any position, all as specified and as directed.

M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) for concrete bed of 10cm thick, to drain pipes of 100 mm dia,including packing under, and hunching against the sides of pipes after they are laid and tested, complete all as specified and as directed.

M&L for 100 mm dia pipe (Grade ‘A’ pipe) Salt glazed stone ware drain pipes laid in trenches and jointed in CM 1:3 complete all as specified and directed. Make: Indo/Khandelwal/ Mancheryal Ceramics

Complete removal of the existing treatment on ceiling and applying two coats of distemper oil emulsion over a coat of primer including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of newly plastered surfaces of ceiling and applying two coats of distemper oil emulsion over a coat of primer including preparation of surfaces complete all as specified and as directed.

M&L for preparing of newly plastered external wall surfaces and applying two coats of Acrylic emulsion paint exterior grade (100% Acrylic) over a coat of primer, etc complete all as specified and as directed.

M&L for preparing old plastered or unplastered surfaces on walls including cornices by two coats of Acrylic emulsion paint exterior grade (100% Acrylic) all as specified and directed by the Engineer-in-Charge.

M&L for complete removal of the existing old treatment on walls and applying two coat of distemper oil emulsion over a coat of alkali resistant primer over 3mm thick wall care putty, including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

Preparation of newly plastered internal wall surface and applying two coats of distemper oil emulsion on walls over a coat of Alkali resistant priming paint over the coat of 3mm thick wall care putty etc complete all as specified and as directed

M&L for PCC 1:2:4, type B-0 (20 mm graded stone aggregate) as in copings for sewage chamber, bed plates, valley gutters, kerbs etc including necessary form work complete all as specified and as directed.

M&L PCC (1:2:4) type B-1, using 20 mm graded stone aggregate as in surface channels for sewage chembers and benching at bottom of drains including forming fair finishes to drains/channels etc complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm of broken stone boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.

M&L for 75mm thick plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in top layer of plinth protection, path etc., finished even and smooth without using extra cement complete all as specified and as directed.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound, Grade ‘A, all as specified and as directed.

Removal of debris (Aggregates) obatained from demolition including loading and unloading to a distance of 5km from the starting point and deposited where directed etc complete all as specified and as directed.

S& F of Vitreous China urinals, half stall type (back to corner wall type), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) etc complete all as specified and directed by Engr -in- charge.

Taking down carefully un serviceable point wiring of light points, fan, socket out let on TW battens/PVC pipes/casing & caping including material like sockets, switches, ceiling roses, regulators, light fittings etc and removing the materials from site and making good the disturbed portion of walls/floors ceiling etc complete all as specified and as directed.

M & L for Point wiring with 1.5 Sqmm multistranded copper conductor wire with unsheathed, FRLS grade PVC insulated, single core with earth continuity conductor of 1.5 sqmm FRLS grade PVC insulated multistranded copper conductor and including rigid PVC conduit conceal of suitable size but not less than 20mm dia. and all accessories fixed to the surface of the roof/ walls or in chases etc. including terminal boxes made out of MS sheet of thickness should be not lessthan 1.2mm thick for fixing of switches, fan regulators socket outlet etc along-with 3mm thick top laminated bakelite sheet for housing switches, etc complete all as specified and as directed for the following :-

(a) One light point controlled by one switch

(b) One Exhaust fan point controlled by one switch

All as per item No. 03 above but wiring with 2.5 sqmm copper cable with 2.5 sqmm for one earth continuity cable for 6 pin 15 Amp sockets outlet controlled by 15 Amp switch

S&F of ceiling rose, three terminal, PVC/polycarbonate, insulated body, ISI marked complete all as specified and as directed.

S&F Switch Piano type polycorbonate white 1 way, 6A, 240Volts complete all as specified and as directed.

S & F Switch socket combination 5 in 1, 5/16 amps multipurpose flush type in independent board complete all as specifeid.

S&FLED light fitting 1x10 W 220 V AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&FLED light fitting 1x20 W 220 V AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

M&L for Sub Main wiring with two runs of 4sq mm 1100 V grade (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including medium grade, rigid non-metallic PVC conduit / casing & caping (as per site requirement) of suitable sizewith all necessary fittings, surface in walls/roof/floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dolly complete and after taking out the existing sub-main wiring etc. complete all as specified and as directed.

Note:-(i) Necessary PVC dummy plates & rigid PVC junction boxes for maint./inspection purpose as required on site/directed by Engr-in-charge shall deemed to be included in the quoted rate.

(ii) Same size wire shall be used for phase, neutral & earth conductor

(iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue only for phase, black for neutral and green for earth leads.

(iv) Three runs of cable and one run of PVC conduit / casing caping will be measured as one uint.

S&F of MCB DB SPN 4 way with copper bus bar & neutral link double door type to be fixed in the wall including connections and making good the disturbed surface of wall to perfectly match with the exsting wall complete all as specified and as directed.

S&F MCB SPN 6 to 32A, 10KA rupturing capacity complete all as specified and as directed.

S&F MCB SP 6 to 32 A 10 KA rupturing capacity complete all as specified and as directed.

Supply & Fixing exhaust fan iron body with louvers 300 mm sweep single phase 240V AC 50 Hz and connecting up including lovers including making necessary opening on stone/brick masonary wall of suitable size finishing it properly and making good with matching colours with the surrounding provision of cable 3 core of size 0.5 Sqmm from ceiling rose to fan complete all as specified and directed.

S J REDDY

Sadh builders