Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.9 CrAccepted-AOC | ₹43.9 Cr Quoted ₹44.0 Cr | L1 | Accepted-AOC Bid Accepted being overall reasonable |
| 2 | L2₹46.7 CrRejected-Finance | ₹46.7 Cr | L2 | Rejected-Finance Other than L1 |
| 3 | L3₹49.9 CrRejected-Finance | ₹49.9 Cr | L3 | Rejected-Finance Other than L1 |
| 4 | L4₹56.7 CrRejected-Finance | ₹56.7 Cr | L4 | Rejected-Finance Other than L1 |
| 5 | L5₹56.8 CrRejected-Finance | ₹56.8 Cr | L5 | Rejected-Finance Other than L1 |
Tender Value
₹44.9 Cr
EMD Value
₹18.8 L
Closing Date
4 Dec 2023, 6:00 pmClosed
Chief Engineer Jabalpur Zone
HQ Chief Engineer Jabalpur Zone Ridge Road Jabalpur Cantt 482001
PROVN OF OTM ACCN FOR 212 STUDENT INCL 105 ACCN WITH SPL ITEMS OF WKS FOR STUDENT OFFRS OF FOREIGN COUNTRIES AT INF SCHOOL MHOW
2023_MES_603976_1
752889A
Open Tender
Civil Works
700 days
MHOW
AS PER NIT
9 documents required · 9 mandatory
₹3,000
GE Maint Inf School Mhow
₹18.8 L
Yes
2 Jan 2024
17 Jun 2023
6 Dec 2023
10 Oct 2023
4 Dec 2023
15 Nov 2023
Amount
SCHEDULE "A"
SCHEDULE "A" PART-I (Building Work) Lump sum price worked out by the contractor for 'Building Work' as listed in Schedule 'A' Part-I against the lump sum price inserted by the MES.
Sch 'A' Part-II ( Internal Water supply, Hot water Supply and Solar Water Heater) Lump sum price worked out by the contractor for Internal Water Supply, Hot water Supply and Solar Water Heater) as listed in Schedule 'A' Part-II against the lump sum price inserted by the MES.
Sch 'A' Part-III ( Internal Electrification) Lump sum price worked out by the contractor for 'Internal Electrification ' as listed in Schedule 'A' Part-III against the lump sum price inserted by the MES.
Sch 'A' Part-IV (External Water supply) Lump sum price worked out by the contractor for ' External Water Supply' as listed in Schedule 'A' Part-IV against the lump sum price inserted by the MES.
Sch 'A' Part-V (External Electric Supply) Lump sum price worked out by the contractor for'External Electrification ' as listed in Schedule 'A' Part-V against the lump sum price inserted by the MES.
Sch 'A' Part-VI (Road, Path and Culvert) Lump sum price worked out by the contractor for 'Road Path and Culvert ' as listed in Schedule 'A' Part-VI against the lump sum price inserted by the MES.
Sch 'A' Part-VII (Sewage Disposal) Lump sum price worked out by the contractor for 'Sewage Disposal ' as listed in Schedule 'A' Part-VII against the lump sum price inserted by the MES.
Sch 'A' Part-VIII (Area Drainage) Lump sum price worked out by the contractor for 'Area Drainage ' as listed in Schedule 'A' Part-VIII against the lump sum price inserted by the MES.
Sch 'A' Part-IX (Fencing & Gate) Lump sum price worked out by the contractor for 'Fencing & Gate ' as listed in Schedule 'A' Part-IX against the lump sum price inserted by the MES.
Sch 'A' Part-X (Lightening Protection) Lump sum price worked out by the contractor for 'Lightening Protection' as listed in Schedule 'A' Part-X against the lump sum price inserted by the MES.
Sch 'A' Part-XI (Site clearance, excavation & earth works) Lump sum price worked out by the contractor for 'Site clearance, excavation & earth works' as listed in Schedule 'A' Part-XI against the lump sum price inserted by the MES.
Sch 'A' Part-XII (Demoltion & Dismantling) Lump sum price worked out by the contractor for 'Demolition & Dismantling' as listed in Schedule 'A' Part-XII against the lump sum price inserted by the MES.
Note for Srl No 2 to 13 The percentage above / below the SSR -2020 (part-II) rates shall be derived from the amount quoted by the contractor against Srl No. 2 to 13 by comparing it with the amount inserted / pre- priced by the department and the same shall be applicable for the items of respective schedule
Schedule 'A' Part-XIII (Miscellaneous works)
Internal Water Supply
Item No 01 : S&F angle stop valves, 15 mm bore fancy type chromium plated as per Griha norms complete, with crutch or butterfly handle, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and as directed. Make: Jaguar or equivalent in Hindware/Parryware / Somany/Cera
Item No 02 : S&F low-flow two way bib taps fancy type chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore as per GRIHA norms complete Make Jaguar cat part No G0634A1 or equivalent of Hindware/Somany / Parryware/ Cera all as specified and as directed.
Item No 03 : S&F low-flow Kitchen Faucet, fancy type, chromium with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore as per GRIHA norms complete Make Hindware Cat Part NO F280020GRPC or equivalent of Jaquar/Parryware/Somany / Cera all as specified and as directed.
Item No 04 : S&F CPVC Male Brass Treaded Adopter (MBTA)/ Female Brass Threaded Adopter (FBTA) of approved makes as per GRIHA norms 3 star rating complete all as specified and as directed
(i) Male Brass Treaded Adopter (MBTA) / Female Brass Threaded Adopter (FBTA) of 16 mm internal dia
(ii) Male Brass Treaded Adopter (MBTA) / Female Brass Threaded Adopter (FBTA) of 20 mm internal dia
(iii) Male Brass Treaded Adopter (MBTA) / Female Brass Threaded Adopter (FBTA) of 25 mm internal dia
(ii) Male Brass Treaded Adopter (MBTA) / Female Brass Threaded Adopter (FBTA) of 40 mm internal dia
Item No 05 : S&F low flow chromium plated shower rose 120x120 mm size with CP arm 300mm long with swivel joint fixed to pipe etc as per GRIHA 3 star rating norms complete all as specified and directed. Make: Jaguar (Roca) Cat part No T9901A1GF or equivalent in Hindware/Parryware/Somany/Cera
Item No 06 :S&F low flow chromium plated health faucet with 8mm dia and 1.5 m long flexible tubes and wall hook suitable for EWC including nut/washer as per GRIHA norms 3 star rating complete all as specified and as directed. Make : Jaguar Cat Part No G573 or equivalent in Hindware/Parryware/Somany/Cera
Item No 07 : S&F CP WHB single lever basin mixture elbow operated 15 mm bore dia chromium plated fancy type screw down high pressure with crutch or butterfly handle, screwed both ends for iron pipes for unions complete all as specified and as directed. Make: Jaguar G4114A1GJ or equivalent in Hindware/Parryware/Cera/Somany
Item No 08 : S&F low flow chromium plated 3 hole wall mixer 15 mm dia including provision of over head shower as per 3 star griha rating complete all as specified and directed. Make: Jaguar cat Part NO G3154A1GF or equivalent in Hindware/Parryware/Cera/Somany
Item No 09 : S&F of UPVC Waste pipe of 40 mm dia suitable for wash basin/sink etc complete all as specified and as directed.
Item No 10 : S& F CP brass tubular towel rail 60 cm long, 20 mm dia fixed with PVC rawl plug with steel screws as per GRIHA norms 3 star rating complete all as specified and as directed. Make: Jaguar or equivalent in Hindware/Parryware/ Cera/Somany
Item No 11 : S&F 125 mm long soap dish brass chromium plated as per GRIHA norms 3 star rating complete all as specified and as directed. Make: Jaguar or equivalent in Hindware/Parryware/ Somany/Cera
Item No 12: S&F corner self complete all as specified and as directed. Make: Jaguar or equivalent in Hindware/Parryware/ Somany/Cera
Item No 13 : S&F glass self complete all as specified and as directed. Make: Jaguar or equivalent in Hindware/Parryware/ Somany/Cera
Item No 14 : S&F toilet paper holder brass chromium plated complete all as specified and as directed. Make: Jaguar or equivalent in Hindware/Parryware/ Somany/Cera
Item No 14(A) : S& F 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors as per GRIHA norms complete all as specified.
Item No 14(B) : S& F 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors as per GRIHA norms complete all as specified.
Item No 14(C) : S& F 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors as per GRIHA norms complete all as specified.
Item No 14(D) : S& F 40mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors as per GRIHA norms complete all as specified.
Item No 14(E) : S & F Gun metal globe or gate valve(ISI Marked, Class-150), with iron wheel head, screwed both ends for iron pipe/ for unions of 20 mm bore, as per GRIHA norms complete all as specified and directed.
Item No 14(F) : S & F Gun metal globe or gate valve(ISI Marked, Class-150), with iron wheel head, screwed both ends for iron pipe/ for unions of 25 mm bore, as per GRIHA norms complete all as specified and directed.
Item No 14(G) : S & F Gun metal globe or gate valve(ISI Marked, Class-150), with iron wheel head, screwed both ends for iron pipe/ for unions of 40 mm bore, as per GRIHA norms complete all as specified and directed.
Item No 14(H) : S & F Bottle trap 32mm of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms), as per GRIHA norms complete all as specified and directed.
Item No 14(I) : S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 25 mm bore iron pipe as per GRIHA norms complete all as specified and directed.
Item No 14(J) : S&F Galvanised steel water tubing medium grade with & including all fittings (ISI marked), 25 mm bore, fixed on/ concealed in walls, laid in floor, ceiling, as per GRIHA norms etc, complete all as specified and directed.
Item No 14(K) : Supply & Fix Hot water pipe duly insulated with glass wool and aluminium cladding 15 mm bore, as per GRIHA norms complete all as specified and directed.
Item No 14(L) : Supply & Fix Hot water pipe duly insulated with glass wool and aluminium cladding 20 mm bore, as per GRIHA norms complete all as specified and directed.
Internal Electrification
Item No 15 : M&L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories. heavy duty ISI marked after chasing in wall / ceiling etc, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed for the following:-
(a) one light point controlled by one way switch 5 amps
(b) one fan point controlled by one way switch 5 amps
(c) one light point controlled by two way switch 5 amps
(d) one 3 pin 5 Amps switch socket outlet controlled by one switch on independent board.
(e) one bell point controlled by one bell switch 5 amps
(f) one 3 pin 5 Amps switch socket outlet controlled by one switch on same board
Item No 16 : M&L for Point wiring for one 5/15 Amps Switch socket combination using approved colour coding as per IS, with multistranded copper conductor 2.5 Sq mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade IS-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories. heavy duty ISI marked after chasing in wall / ceiling etc, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed.
Item No 17 : All as per item No. 15 but using multistranded copper conductor 4 Sq mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade IS-694 marked for AC point including PVC insulated multistranded copper conductor 4.0 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed.
Item No 17(A) : S & F Modular Switch piano flush type, single pole, one way, 5/6 Amp single module as per GRIHA norms complete all as specified and directed.
Item No 17(B) : S & F Modular Switch piano flush type, single pole, one way, 15/16 Amp single module as per GRIHA norms complete all as specified and directed.
Item No 17(C) : S & F Bell push modular 6 Amps single module as per GRIHA norms complete all as specified and directed.
Item No 17(D) : S & F Modular Switch piano flush type, single pole, two way, 5/6 Amp single module as per GRIHA norms complete all as specified and directed.
Item No 17(E) : S & F Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type as per GRIHA norms complete all as specified and directed.
Item No 17(F) : S & F Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type as per GRIHA norms complete all as specified and directed.
Item No 17(G) : S & F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply as per GRIHA norms complete all as specified and directed.
Item No 17(H) : S & F Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply as per GRIHA norms complete all as specified and as directed.
Item No 17(I) : S&F Sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system as per GRIHA norms complete all as specified and directed.
Item No 17(J) : S&F Sheet metal enclosure MCB DB SPN 12 way with 200 amps rated bus bar 240 volts double door with magnetic locking system as per GRIHA norms complete all as specified and directed.
Item No 17(K) : S&F Sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with magnetic locking system as per GRIHA norms complete all as specified and directed.
Item No 17(L) : S&F sheet metal enclosures single pole and neutral 2 way, 240 volt with 200 Amp rated bus bar for DBs as per GRIHA norms complete all as specified and directed.
Item No 17(M) : S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20/32 Amps as per GRIHA norms complete all as specified and directed.
Item No 17(N) : S & F Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. heavy duty of size 20mm dia for LAN, Telephone and TV connections as per GRIHA norms complete all as specified and directed.
Item No 17(O) : S & F Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. heavy duty of size 25mm dia for LAN, Telephone and TV connections as per GRIHA norms complete all as specified and directed.
Item No 18 : M&L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with stranded copper conductor of size 10 Sq mm nominal area and draing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Four runs of conductor cable, one runs of earth cable and one run of PVC conduit will be measured as one unit.
Item No 19 : M&L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and draing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Four runs of conductor cable, one runs of earth cable and one run of PVC conduit will be measured as one unit.
Item No 20 : M&L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and draing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of conductor cable, one run of earth cable and one run of PVC conduit will be measured as one unit.
Item No 21 : M&L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4 Sq mm nominal area and draing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 4.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of conductor cable, one run of earth cable and one run of PVC conduit will be measured as one unit.
Item No 22 : M&L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 2.5 Sq mm nominal area and draing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 2.5 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of conductor cable, one run of earth cable and one run of PVC conduit will be measured as one unit.
Item No 23 : MCB 'C' series 240/415 volts, 50 HZ, 10 KA breaking capacity, ISI marked (IS 8828), complete of following capacities ;-
(a) MCB SP 5 to 32 Amps.
(b) MCB SPN 5 to 32 Amps.
(c) MCB SPN 40 Amps.
(d) MCB TPN 63 Amps.
Item No 24 : S&F ceiling fan 1200 mm sweep, heavy duty, single phase, AC, 230 volts, 50 Hz, BEE 5 star rating, ISI Marked complete with down rod, canopy, blades, BLDC motor etc incl electrical connections from ceiling rose to fan with 3 core 1.5 sqmm multi stranded copper conductor cable & writing MES No. with synthetic enamel paint complete all as specified and directed.
Item No 25 : S&F energy efficient exhaust fan of 300 mm sweep made of metal body ventil Air - DS type complete with louver with bolts nuts and washers size of the bots 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base complete all as specified and directed.
Item No 26 : S & F 1 x 10 W LED light fittings mirror type with high diffurser, 2 feet, 10 watt 220 voit AC decorative typr with driver holder and LED lamp including complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and as directed.
Item No 27 : S & F wall mounted LED tube light fitting 20 Watts batten for surface mounted, anodized extruded aluminium housing, high tranmissitvity diffuser,high lumen out put box type fitting,230 volts and integrated electronic driver connector block etc with warrnty option of 5 years from date of installation and necessary mounting arrangement and connected with 3 core multistrnded flexible copper cable PVC insulated of size 23/0.193 mm from ceiling rose to fitting complete all as specified and as directed.
Item No 28: S&F integral post top lanters complete with black ABC plastic spigot, spun aluminium funnel shape with clear acrylic cover light opening on canopy with baffles and accessories with 15 watt LED lamp, GI pipe as requied to fix in gate piller complete all as specfied and directed. Make : Havells cat part No. RUBYMINIPT15WLED757PSYMTOPC or eqv in philips complete all as specified and directed.
Item No 29 : S & F for LED luminiaire 600 mm x 600mm square LED panel 35/36 watts, 220V recessed type with high efficieny PMMA diffuser soft glare free light complete with drovers, holders, LED lamp suitable for roof ceilling, including up with driver there core flexible copperr conductor cases of suitable size complete all as specified and as directed.
Item No 30 : S & F for water heater storage type (Geyser) vertical/ Horizental type as per site requirement with inner container of capacity 25 itrs, electrically operated, AC 230 Volts, BEE 5 star rated, ISI marked including 04 Nos of hold fashner nuts required suitable size fixed in brick wall, PVC connection pipe hot & cold for Officers JOC's and OR Md Accn complete all as specified and as directed.
Item No 31 : S & F round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holder, LED lamp suitable for roof ceiling including connecting up with three core flexible copper cable of suitable size complete all as specified and directed.
Item No 32 : S & F decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 10 watts complete all as specified and directed. Make Habells Cat No LKDLO6160099 or its equvalent in Philips, Bajaj.
Item No 33 : S&F Energy saving new generation environmental friendly long life versatile pressure die cast aluminum IP 65 for security light fitting luminaries with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed.
Item No 34 : M&L for Earthing with Galvanised iron earth plate electrode 600 mm x 600 mm & 6 mm thick burried directly in ground (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below GL connected to main earthing lead 4mm dia GI wire by means of GI nuts, bolts & washers all as shown in electrial plate No 3 MES Schedule Part I protected by 15 mm bore GI pipe light grade, with & including; PCC 1:3:6 type C1 pit with cover of RCC 1:1.5:3 A1 40mm thick reinforced with 3Nos 6mm dia bars both way, watering arangements with 20 mm GI medium grade pipe ISI marked , GI funnel with GI mesh, filling with common salt & charcoal in alternate layers, necesary excavation and earth works in any type of soil, including test point, testing & commissioning, complete.(Note;- earth lead & protection pipe up to and including 7.5 m length is deemed to included in unit rate quoted by the contractor).
External Water Supply
Item No 35: Construction of brick masonry valve pit chamber of size 600mm x 600mm x 600mm (internal dimensions) including necessary excavation and earth work in any type of soil, angle iron frame MS sheet cover with locking arrangements including painting two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and shown on drawing.
Item No 36 : Supply, Laying, jointing & testing of Ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast, class K-9, with cement mortar lining in inner side as per IS:8329/2000 (latest revision) and other relevant standards and metallic zinc coating followed by a finishing layer of epoxy paint on outer side, suitable for push on joint (rubber gasket joint) including rubber gasket, in any length laid in trenches/ over masonry pillar and connection to old or new position complete all as specified and directed of following sizes:-
(a) 150 mm bore
(b) 100 mm bore
Item No 37 : M&L for Ductile iron fitting for spigot socket pipe such as bends (any type, radius and angle) tapers any type (straight, bend increasing, decreasing or double socket etc.) Tee pieces single branch "Y" junction, double branch, cross (All socket or socket and spigot) collars, restrained joint, mechanical joint, caps & plugs 100 mm to 250 mm dia bore including cutting and jointing old/new positions as specified and as directed.
Item No 38 : Supply, installation & testing End suction Top discharge type centrifugal pump set of capacity 7.5 HP IE-3 motor/2000 RPM/3 Ph-415 Vac. Pump casing CI with CED coated, impeller- stainless steel fabricated, base plate MS with CED coated with mechanical seal. The flow will be 500 LPM and working head of 41 meter. Including A1 smart starter 7.5 HP-3Phase/460V / 50HZ/ 60HZ. Automatic romote moitoring system (RMS) panel having features such as Dry Run and Under load protection. inbuilt energy meter facility to measure the energyconsumption, low voltage and high boltage cut off over ampere and under ampere controllers including providing suitable foundation and mounting arrangements to the pumpsets & starters for smoth and noise free operation. All as directed by engineer in charge. Make Shakti/Kirloskar/ Jyoti.
Item No 39 : Supply and fix cast iron non return valve, swing Horizontal type with rubberised steel ball and CI body flanged fixed between exit of the pump and delivery pipe line of size 80 mm bore of model B-02 including suitable nut, bolts washers made of GI: (Make: NORMEX or equvalent make as approved).
Item No 40 : Supply and fix cast iron foot valve, valve, swing Horizontal type with rubberised steel ball and CI body flanged fixed at bottom of suction pipe of size 65 mm bore of model B-04 including suitable nut, bolts washers made of GI: (Make: NORMEX or equvalent make as approved).
Item No 41 : M&L for MS pipes with double flanged including bends and fittings of size heavy class complete including making necessary cutting, welding/forging to connect with suction and deliery line of pumpsets in and including prosion of suitable MS flange of following size complete all as specified and directed: Make: Jindal/ TATA
(a) 80 mm bore
(b) 65 mm bore
(c) 50 mm bore
External Electric Supply
Item No 42: Supply and fixing cable path indicator made of MS sheet of size 200 mm x 150 mm x 3 mm thick and spot welding with angle iron of size 40 x 40 x 5 mm thick, 750 mm long embedded in PCC (1:2:4) type B-1 (using 12.5 mm graded granite stone aggregate) including providing one coat of synthetic enamlled black paint over one coat of red oxide primer and sign writing with white paint showing size of cable HT / LT complete all as directed & specified.
Item No 43: Supply and fix switch air break gang operated HT 11 KV Volt grade triple pole with 12 insulators, 200 amps rating mounted on Polymer based insulator and fitted on steel frame horizontally operated mechanism from ground level consisting of operating rod of 25 mm bore Heavy grade GI pipe of suitable length worked from ground level and with locking arrangement flat iron clamp 50 mm x 6 mm including MS channel of suitable size and length for fixing GOD including bolts, nuts, and washers complete all as specified and directed.
Item No 44 : S & F LED light fitting for street /security light, energy saving & environmental friendly with long life versatile pressure die-cast housing with toughened glass and high power LEDs with secondary optics of capacity 35/36 watts 240 volts AC 50 Hz, IP 66 protection with warranty option of 5 years from date of installation complete all as specified and directed.
Item No 45 : Supply, installation, commissioning and testing of 16 M high mast system with its accessories. Mast shaft shall be in tow sections, made out of MS hot dip galvanised and suitable for wind velocity as per BS 729 or equivalent. It shall also include accessories for hgh mast including head frame, steel wire rope 6 mm dia (7/19 construction), traling cable, double drum winch, galvanised lantern carriage suitable for 06 Nos LED flood light tuminaire of high mast symmetrically & its control gear boxes and lighting final. The mast shall have an integral powertool installed inside the base compartment for its operation including necessary excavation and earth work, PCC foundation, reinforcement PCC and form work etc complete all as per manufacturer's recommendation, bolts manufactured from special steel along with nuts, washers, anchor plates and templates and including aviation obstruction luminaires die cast aluminium alloy housing red coloured poly carbonate high dome, lamp and accessories and connected to electrical system of high mast along with panel and 06 Nos of Havells/Bajaj/CG make luminaires suitable for 1 x 120 W LED flood light with control Gear box and with LED fitting all as specified and shown in technical data specification complete. Make for light fitting - Baja/Wipro or equivalent Philips/CG. Note: (i)High mast technical data specification and foundation all as manufacturer instructions. (ii) LED flood light fitting 120 Watts - 06 Nos shall be measured and paid separetely under relevant item.
Item No 46: Supply and fixing LT panel board suitable for 16 Mtr High mast light fitting including all necessary 40 Amps TPN-01 No, 32 Amps MNX power contactor-01 No, MNX 16 Amps power contactor 02 Nos, Motor lower upper switch - 01 No, MCB SP - 06 Amps-01 No and all other accessories & fixing arrangement & PCC foundation complete all as specified and directed.
Item No 47: Supply and fixing LED flood light fitting for High mast lighting of energy saving & environmental friendlylong life versatile pressure die-cast housing with toughened glass and individual high power LED with secondary optics of capacity 120 Watt 240 volts AC 50 Hz, IP 65 protection including necessary electrical connection and five years on site warranty from manufacturer complete all as specified and directed.
Item No 48 : Supplying, fabrication, installation and testing of LT panel out door type factory made CPRI approved water and vermin proof, protection of size 2500 mm x 1500 mm x 800 mm (over all dimension) made out of 3.00 mm thick CRCA sheet duly supported with mild steel angle iron of size 50X50X6mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizonatal sides of the frame with front and back side openable, single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one following fitment accessories and also including removing old exisisting one complete all complete as specified and as directed. NOTE : Rate of earthwork and PCC work are deemed to be inclusive in this item. (Tranformer LT Panel No 01)
OUTGOING (a) MCCB 400 Amps, adjustable thermal magnetic release type, 4 pole, 415 volts, ICs = 100% Icu, 25 KA breaking capacity, rating 250 Amps including all fixing accessories with both ends spreader links - 01 No (b) MCCB 250 Amps, adjustable thermal magnetic release type, 4 pole, 415 volts, ICs = 100% Icu, 25 KA breaking capacity, rating 100 Amps including all fixing accessories with both ends spreader links - 01 Nos (c) MCCB, 160 Amps adjustable thermal magnetic release type, 4 pole, 415 volts, ICs = 100% Icu, 25 KA breaking capacity, rating 63 Amps including all fixing accessories with both ends spreader links - 01 Nos (d) MCCB, 100 Amps adjustable thermal magnetic release type, 4 pole, 415 volts, ICs = 100% Icu, 25 KA breaking capacity, rating 63 Amps including all fixing accessories with both ends spreader links - 01 Nos (e) MCCB, 63 Amps adjustable thermal magnetic release type, 4 pole, 415 volts, ICs = 100% Icu, 25 KA breaking capacity, rating 63 Amps including all fixing accessories with both ends spreader links - 01 Nos (f) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150 mm, white with letters, flgures and conventional skull and bones in signal red and fixed with nuts and bolts on door/ shutter of JB for LT -01 No.
Item No 49 : Supplying, fabrication, installation and testing of LT panel out door type factory made CPRI approved water and vermin proof, protection of size 2500 mm x 1500 mm x 800 mm (over all dimension) made out of 3.00 mm thick CRCA sheet duly supported with mild steel angle iron of size 50X50X6mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizonatal sides of the frame with front and back side openable, single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one following fitment accessories and also including removing old exisisting one complete all complete as specified and as directed. NOTE : Rate of earthwork and PCC work are deemed to be inclusive in this item. (Tranformer LT Panel No 02 to LT Panel No 02 for Lighting supply)
OUTGOING (a) 4 Pole MCCB 315 Amps rotary handle, adjustable thermal magnetic release type, 4 pole, 415 volts, Ics + 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -01 No (b) 4 Pole MCCB 200 Amps rotary handle, adjustable thermal magnetic release type, 4 pole, 415 volts, Ics + 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -01 No (c) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150 mm, white with letters, flgures and conventional skull and bones in signal red and fixed with nuts and bolts on door/ shutter of JB for LT -01 No.
Item No 50 : Supplying, fabrication, installation and testing of LT panel out door type factory made CPRI approved water and vermin proof, protection of size 2500 mm x 1500 mm x 800 mm (over all dimension) made out of 3.00 mm thick CRCA sheet duly supported with mild steel angle iron of size 50X50X6mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizonatal sides of the frame with front and back side openable, single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one following fitment accessories and also including removing old exisisting one complete all complete as specified and as directed. NOTE : Rate of earthwork and PCC work are deemed to be inclusive in this item. (Tranformer LT Panel to LT Panel No 03 for Light load for Bldg No 01, 02 & 03)
OUTGOING (a) 4 Pole MCCB 63 Amps rotary handle, adjustable thermal magnetic release type, 4 pole, 415 volts, Ics + 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -06 No (b) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150 mm, white with letters, flgures and conventional skull and bones in signal red and fixed with nuts and bolts on door/ shutter of JB for LT -01 No.
Item No 51 : Supplying, fabrication, installation and testing of LT panel out door type factory made CPRI approved water and vermin proof, protection of size 1500 mm x 1400 mm x 500 mm (over all dimension) made out of 3.00 mm thick CRCA sheet duly supported with mild steel angle iron of size 50X50X6mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizonatal sides of the frame with front and back side openable, single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one following fitment accessories and also including removing old exisisting one complete all complete as specified and as directed. NOTE : Rate of earthwork and PCC work are deemed to be inclusive in this item. (LT sub Panel No 04 for Light load for Bldg No 04, 05)
OUTGOING (a) 4 Pole MCCB 63 Amps rotary handle, adjustable thermal magnetic release type, 4 pole, 415 volts, Ics + 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -04 No (b) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150 mm, white with letters, flgures and conventional skull and bones in signal red and fixed with nuts and bolts on door/ shutter of JB for LT -01 No.
Item No 52 : Supplying, fabrication, installation and testing of LT panel out door type factory made CPRI approved water and vermin proof, protection of size 2500 mm x 1500 mm x 800 mm (over all dimension) made out of 3.00 mm thick CRCA sheet duly supported with mild steel angle iron of size 50X50X6mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizonatal sides of the frame with front and back side openable, single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one following fitment accessories and also including removing old exisisting one complete all complete as specified and as directed. NOTE : Rate of earthwork and PCC work are deemed to be inclusive in this item. (LT Panel No 05 for Powerload for Bldg No 01, 02 & 03)
OUTGOING (a) 4 Pole MCCB 63 Amps rotary handle, adjustable thermal magnetic release type, 4 pole, 415 volts, Ics + 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -06 No (b) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150 mm, white with letters, flgures and conventional skull and bones in signal red and fixed with nuts and bolts on door/ shutter of JB for LT -01 No.
Item No 53 : Supplying, fabrication, installation and testing of LT panel out door type factory made CPRI approved water and vermin proof, protection of size 1500 mm x 1400 mm x 500 mm (over all dimension) made out of 3.00 mm thick CRCA sheet duly supported with mild steel angle iron of size 50X50X6mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizonatal sides of the frame with front and back side openable, single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one following fitment accessories and also including removing old exisisting one complete all complete as specified and as directed. NOTE : Rate of earthwork and PCC work are deemed to be inclusive in this item. (LT Panel No 06 for Powerload for Bldg No 04 & 05)
OUTGOING (a) 4 Pole MCCB 63 Amps rotary handle, adjustable thermal magnetic release type, 4 pole, 415 volts, Ics + 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -04 No (b) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150 mm, white with letters, flgures and conventional skull and bones in signal red and fixed with nuts and bolts on door/ shutter of JB for LT -01 No.
Item No 54 : Supplying, fabrication, installation and testing of LT panel out door type factory made CPRI approved water and vermin proof, protection of size 1500 mm x 1400 mm x 500 mm (over all dimension) made out of 3.00 mm thick CRCA sheet duly supported with mild steel angle iron of size 50X50X6mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizonatal sides of the frame with front and back side openable, single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one following fitment accessories and also including removing old exisisting one complete all complete as specified and as directed. NOTE : Rate of earthwork and PCC work are deemed to be inclusive in this item. (Pump house LT Panel No 07)
OUTGOING (a) 4 Pole MCCB 40 Amps rotary handle, adjustable thermal magnetic release type, 4 pole, 415 volts, Ics + 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -01 No (spare) (b) 4 Pole MCCB 32 Amps rotary handle, adjustable thermal magnetic release type, 4 pole, 415 volts, Ics + 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -02 No (for pumps) (c) Multifunctional Digial type timer switch (Astro type having longitude and latitude of Indian cities memory) 240 volts AC Single Phase - 01 No (d) Power contractor 4 pole, 40 Amps 415 volts, 50 Hz - 01 No (e) 4 Pole MCCB 20 Amps with rotary handle, adjustable thermal magnetic release type, 4 pole, 415 volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links - 02 Nos (for security feeder - 02 Nos (f) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150 mm, white with letters, flgures and conventional skull and bones in signal red and fixed with nuts and bolts on door/ shutter of JB for LT -01 No.
Item No 55 : Supply and fix LED Post top lantern light fitting 40 watt, IP65 complete with all accessories complete all as specified and directed.
Item No 56 : S & F integral decorative LED bollard with polycarbonate diffuser square shaped with IP 65 protection suitable for 9 watts LED bulb with necessary MS base box made out of MS sheet of 2 mm thick of suitable size embedded in PCC 1:2:4 base, electrical connections with adequate size complete all as specified and directed.
Item No 57 : S & F LED Aviation obstruction light fitting 2x6 watt, IP65, complete all as specified and directed.
Item No 58 : M&L for Earthing with Galvanised iron earth plate electrode 600 mm x 600 mm & 6 mm thick burried directly in ground (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below GL connected to Galvanised steel strip 32x6 mm by means of GI nuts, bolts & washers protected by 40 mm bore GI pipe light grade all as shown in electrial plate No 3 MES Schedule Part I, with & including; PCC 1:3:6 type C1 pit with cover of RCC 1:1.5:3 A1, 40mm thick reinforced with 3Nos 6mm dia bars both way, watering arangements with 20 mm GI medium grade pipe ISI marked , GI funnel with GI mesh, filling with common salt & charcoal in alternate layers, necesary excavation and earth works in any type of soil, including test point, testing & commissioning, complete.(Note;-Earth protection pipe & earth strip up to and including 7.5 m length is deemed to included in unit rate quoted by the contractor).
Item No 59 : M&L for Earthing with copper earth plate electrode 600 mm x 600 mm & 3.15 mm thick burried directly in ground (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below GL connected to copper strip 30 x 3 mm by means of GI nuts, bolts & washers protected by 40 mm bore GI pipe light grade all as shown in electrial plate No 3 MES Schedule Part I, with & including; PCC 1:3:6 type C1 pit with cover of RCC 1:1.5:3 A1, 40mm thick reinforced with 3Nos 6mm dia bars both way, watering arangements with 20 mm GI medium grade pipe ISI marked , GI funnel with GI mesh, filling with common salt & charcoal in alternate layers, necesary excavation and earth works in any type of soil, including test point, testing & commissioning, complete.(Note;-Earth protection pipe & earth strip up to and including 7.5 m length is deemed to included in unit rate quoted by the contractor).
Item No 60 : M&L for Earthing with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4 mm dia galvanised iron or steel wire all as shown in plate No. 2 to the earthing test point all as specified and indicated including testing on completion.
Item No 61 : Disconnecting of 11 KV/ 433 Volts transformer out door including all necessary HT/LT connections of bothside, earth teriminals and taking down carefully from platform mounted on PCC foundation etc, shifting to prop 212 single living accn substation at mhow with necessary fixing/Installation 11 KV/433 Volts tranformer with all necessary HT/LT electrical connections of following capacity complete all as specified and directed.
(a) 160 KVA capacity
(b) 400 KVA capacity
(c) 750 KVA capacity
Item No 62 : Construction of Plinth of size 2.0 m x 2.0m x 1.5 m for transformer, using 100 mm thick PCC 1:4:8 type D-2 as in lean concrete, flyash brick masonry in CM 1:6, the top of the plinth shall consist of 100mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) over 75 mm thick PCC 1:4:8 type D-2 over compacted moorum filling, 10 mm thick rendering in CM 1:4 on brick surface with and including 25 cm thick stone aggregates of size 12.5 mm all aroud upto and including 1.5 m from the edge of the plinth including the RCC gate and fencing with angle iron post in lieu of RCC post complete all as specified, directed by the Engineer - in - Charge and as shown on TD drawing No CEPZ/98/TD/6, sheet No 2/2
Item No 63 : Disconnecting of 11 KV RMU out door including all necessary HT connections of bothside, earth teriminals and taking down carefully from Platform mounted on PCC foundation etc, shifting to prop 212 single living accn substation at Mhow with necessary required PCC foundation with fixing / installation with all necessary HT electrical connections complete all as specified and as directed of following capacity
Item No 64 : Taking down existing serviceable HT/LT UG cable of any description and size from trenches including shifiting for relaying at another route complete all as specified and directed. Note: excavation and earthwork shall be measured and paid seperately.
Item No 65 : S&F Juction Box for street Lights of size 250 x 200 x 105 mm complete with shock and rust proof, termite resistant, tamper proof, front openable type and including suitable provision for three phase, 4 wire cable (size upto 2.5 sqmm 3 core) incoming & out going loop-in-loop connetion and accomodate with one MCB SP 6 Amps including non metallic clamps and GI nut bolts and washers size and fixed on RCC pole/steel tubular poles complete all as specified and directed.
DG SET
Item No 66 : Supply, install , commisioning and testing of diesel engine driven Gen with sound proof acousri enciosure (canopy CRCA sheet of 2 mm thickness and noise level below 75 decible/M) and provision of exhaust fan insise the canopy to control the noise level as per limit of central pollution control board and including AMF panel 25 KVA 3 phase 415 volt 4 wire 50 cycle and power factor 0.8 complete all as specified and comprising of the following with set of tools and two years maintaince spares as recommended by the manufacturer with and including retrofit emission device with all connected accessories complete all as specifed and directed: (Make:Kirlosker / Cummins India Ltd/crompton greavese)
(a) Prime mover: suitable for driving 25 KVA alternator, water cooled, battery start diesel engine of adequate BHP conforming to BSS frame pedestal support with anti vibration pad rated for continous running capable of taking 10% over load for ine hour in any 12 hrs operation with the following standard activities: (i) Fly wheel to match with the flexible coupling (ii) flexible coupling with guard (iii) Air cleaner oil bath type / dry type (iv) Lubricating oil filter paper element type (v) Fuel pump (vi) Blower type fan and rediator (vii) Governor for class 'A' governing as per IS - 1601 of ELEC/G3 (viii) Starter, motor for electric start complete with dynamic alternate lead acid batterie of 01 nos heavy duty of capacity 12 V 88 AH or adeqaute size and length of cable not less than 2m long including battery box all as directed
(ix) Hour meter and RPM indicator (x) Exhaust pipe brought outside the bud and lagging of entire exhaust pipe with 12 mm dia arrestor rope (xi) Instrument panel duly wired compromising of the following (a) Lub oil temp gauge (b) Lube oil pressure gauge (c) High/Low temp gauge (d) Starting switch with key (e) Fuel tank (b) Alternator: 25 KVA at 0.8 PF brush less self ecited, self regulated 3 phaser, 50 HZ 415 V 4 wire screen protected drip proof enclosure free from stimulation problem continuous rating conforming to BS 2613 IS 4722 complete with automatic voltage regulator between +5% of set voltage from no load to full load.
Item No 67 : Design, Supply, install, testing & commissioning goods lift, speed 1.25 metre/sec with single speed motor, 415 volts, 3 phase AC 50 Hz supply, for 500 kg to 544 kg and suitable for 8 pasenger conforming to IS-14665 and as amended, suitable to serve G+04 upper floors with AC Variable voltage & variable Frequency Drive (VVVF) drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with / without attendant, centre opening doors, number of stop opening 6/6 with door drive (electric motor driven mechanism), sliding stainless steel doors, over speed governer and automatic rescure device (ARD) system, 3D infra red sensor in full height of door and cross flow fan and ceiling light inside the car with emergency light and built in announcing system without hand set (03 Nos, one each in car, near Ground floor landing door) complete all as specified and directed Make: Johnson/Thyseenkrupp Technical specification of lift are as under.
Landing ooperating panel location - Landing disply on wall LOP face plate material - stainless stell Floor designation - G+5 MACHINE AND CONTROLLER DETAILS Machne location - Machine roomless - Gearless Drive system - Micro processor based VVVF Main Power Supply - AC 3 Phase 415 Volts for Lift Operation and 220 volts for light and cross flow Fan SHAFT DETAILS Shaft type - Reinforcedcement concrete with red bricks Shaft width mm x shaft depth mm - 2150 x 1500 Overhead mm - 4200 Pit depth mm - 1600 CABIN DETAIL Car width mm x Car depth mm - 1300 x 1100 Car clear height mm - 2200 Car door type - Power operated center opening sliding door No of door panel - 2 Panel Car door (W x H) mm - 800 x 2000 Design of Lift Cabin - stainless steel Fan - Cross flow fan
Item No 68: Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire rmoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 3.5 core x 50 sqmm complete all as specified and directed.(for lift supply)
Item No 69 : S&F for MCCB adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu rating 40 Amps and including sheet steel. The enclosure shall be wall mounted with and including all fixing accessories complete all as specified and directed.
Road Path and Culvert
Item No 70 : M&L for 225 mm thick (compacted thickness) Wet mix macadam in three layers 75mm(compacted thickness) each with coarse aggregate of broken stones(granite/basalt/black trap) of grading II (63 mm to 40mm size) spread, rolled and consolidated to gradient and camber required spread and rolled to gradient and camber required with 8 to 10 tonne power roller complete all as specified and directed.
Item No 71 : M & L for 2mm thick painting to road surfaces as in lines, cashes, arrows, letters, zebra crossing etc on roads, pavements and the like etc. with thermoplastic road marking paint incl applying type-II glass beads dispensed from the in built while the painting surfaces are hot by mechanical mean including cleaning surfaces complete all as specified and direceted. Make: STP/ASIAN PAINTS/BERGER) NOTE: Application shall be carried out through mechanical appliances by the approved applicator of the manufacturer of paint.
Item No 72 : S&F aluminium roads studs of size 100x100x20 mm with shank reflective microprismatic (red/yellow/white) with MS Zinc coated nails of size 12 mm dia and 120 mm long having both as sides (Dual direction) high impact ABC 3 Nos containing 7 heads each i.e. 42 heads in retro-reflector etc complete aluminium coated of approved quality all as specified.
Item No 73 : S&F solar studs aluminium alloy and polcarbonate stud aluminium decast body with MS zinc coated nails of size 12 mm dia and 120 mm long , complete all as specified and directed
Item No 74 : M&L for Construction of RCC hume pipe culvert(single pipe), 600mm bore, class NP-2 for 3600mm wide road in non expansive soil incl necessary excavation & earth work complete all as specified and shown on drg.
Sewage Disposal
Item No 75 : S&F of precast factory made SFRC (Heavy duty) 600 mm dia cover having 6 mm MS plate embedded in all round alongwith RCC Rim including reinforcement confirming to IS 12592 : 2002 and set in cement mortar 1:4 complete all as specified and directed.
Item No 76 : M & L for DWCPE (SN 8) 180 mm outer dia / 163 mm iner dia confirming to IS 16098 (Part- II) laid on 150 mm thick compacted earth including necessary all fittings/items and activies to execute and make sewer line functional complete all as specified and directed.
Fencing and Gate
Item No 77 : Steel Gate 5.5m wide with wicket agte 1.5 wide and granite cladding on column including all earthwork, RCC, Form work, Mild steel work in gate and painting work complete all as specified and directed.
SCHEDULE "A" (Schedule of credit) Schedule of Credit Rs 950570 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net bid amount)
NITYA NAND AND SONS CONTRACTORS PVT LTD
SHRE GURMUKHDAS CONTRACTOR PVT. LTD.
Mahaveer Engineering Co.
SHREE GURUKRUPA CONSTRUCTION CO.
M/s Gujarat Construction Company
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid