Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹29.2 L
EMD Value
₹58,400
Closing Date
22 Nov 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Repair and Refurbishing of Toilets at various Shops and Manhole repair of Sewage Line near FTC with the Allied Civil Works in RWRDC Division, HAL DC
9387
TENDER NOTICE/NCP/23/24-25/1
Works
Contract Section Civil-FMD-Bangalore
₹0
₹58,400
22 Nov 2024
17 Aug 2024
17 Aug 2024
22 Nov 2024
HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION
NAME OF THE WORK: Repair and Refurbishing of Toilets at various Shops and Manhole repair of Sewage Line near FTC with the Allied Civil Works in RWRDC Division, HAL [DC]. CONTRACT NO. HAL/FMD/R-40/24-25
Name of the Contractor :
Sl. No. Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount
Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with detailed technical specification and tender drawings if any.
DISMANTLING AND DEMOLITION
1 Dismantling 15 to 40mm dia G.I./cpvc pipe concealed or exposed with all GI Specials including stacking of dismantled pipes (within 50 metres lead) including making temporary arrangements for continuing ongoing services to toilets, etc., all complete as directed by Engineer-in-Charge. 156.00 R m 2.98 Rupees Two and Ninety Eight Paise Only 464.88
2 Removing carefully existing damaged wash hand basin of any size and description including all accessories such as waste pipe, waste coupling, pillar taps, angle cock etc., including returning all the serviceable materials to HAL stores/maintenance department etc., including disposal of rubbish off the premises as and where directed, etc., complete all as directed by Engineer-in-Charge. 11.00 Nos 381.36 Rupees Three Hundred Eighty One and Thirty Six Paise Only 4194.96
3 Removing carefully the existing damaged urinals of any description including its accessories such as high level tanks etc handing over serviceable ones to HAL stores and damaged items out of premises of RWR&DC, etc., complete all as directed by Engineer-in-Charge. 18.00 Nos 402.54 Rupees Four Hundred Two and Fifty Four Paise Only 7245.72
4 Removing and refixing existing granite slab of approx size [1.50 X 0.60]m including cement mortar bedding, necessary clamps, fasteners and finishing the same and aligning to levels, etc., complete all as directed by Engineer-in-Charge. 16.00 Nos 805.08 Rupees Eight Hundred Five and Eight Paise Only 12881.28
5 Demolishing cement concrete of any description / brick bat surkhi manually / by mechanical means including disposal of material, etc., complete all as directed by Engineer-in-Charge. 11.50 Cu m 1381.40 Rupees One Thousand Three Hundred Eighty One and Forty Paise Only 15886.10
6 Dismantling existing damaged Indian Water Closet/EWC along with CI / PVC high level flush tank of any description and size including complete demolition of existing cement concrete flooring of any description and thickness, handing over all serviceable items to HAL stores / maintenence department and removing out the debris to distance exceeding 500mtr but not exceeding 1500mtr and depositing spreading and levelling outside the premises of RWR&DC, etc., complete all as directed by Engineer-in-Charge. 19.00 Nos 423.73 Rupees Four Hundred Twenty Three and Seventy Three Paise Only 8050.87
7 Cutting holes through brick work built in cement mortar exceeding one brick thick but not exceeding two brick thick for fixing GI pipe including making the walls in Cement Mortar (1:4) after fixing pipe, removing out the debris & depositing as and where directed, etc., complete all as directed by Engineer-in-Charge. 40.00 Nos 382.92 Rupees Three Hundred Eighty Two and Ninety Two Paise Only 15316.80
8 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts, etc., complete and stacking within 50metres lead, etc., complete all as directed by Engineer-in-Charge. 19.00 Nos 337.36 Rupees Three Hundred Thirty Seven and Thirty Six Paise Only 6409.84
9 Dismantling tile work in floors, walls and roofs laid in cement mortar including stacking material within 50metres lead. For thickness of tiles above 25mm and up to 40mm, etc., complete all as directed by Engineer-in-Charge. 447.00 Sq m 104.14 Rupees One Hundred Four and Fourteen Paise Only 46550.58
10 Repair to door: Removing and refixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size [15 x 10 x 10]cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, etc., complete all as directed by Engineer-in-Charge. 8.00 Nos 1637.68 Rupees One Thousand Six Hundred Thirty Seven and Sixty Eight Paise Only 13101.44
11 Providing 18mm cement plaster in two coats under layer 12mm thick cement plaster (1:5) finished with a top layer 6mm thick cement plaster (1:6).including finishing curing, etc., complete all as directed by Engineer-in-Charge. 98.00 Sq m 476.41 Rupees Four Hundred Seventy Six and Forty One Paise Only 46688.18
WATER SUPPLY & DRAINAGE WORK
12 Providing and fixing Single socketed pipes on wall face unplasticised Rigid PVC drainage pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, bends, collars, with required accessories, etc., complete all as directed by Engineer-in-Charge.
a) 75mm diameter 48.00 R m 228.58 Rupees Two Hundred Twenty Eight and Fifty Eight Paise Only 10971.84
b) 110mm diameter 115.00 R m 346.73 Rupees Three Hundred Forty Six and Seventy Three Paise Only 39873.95
13 Providing and laying R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of (1:2) (1 cement : 2 fine sand) including testing of joints, etc., complete for 150 mm dia. R.C.C. pipe, etc., complete all as directed by Engineer-in-Charge. 60.00 R m 511.23 Rupees Five Hundred Eleven and Twenty Three Paise Only 30673.80
14 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures such as angle cock, two in one tap with health faucet gun all complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid, etc., complete all as directed by Engineer-in-Charge. 10.00 Nos 5986.03 Rupees Five Thousand Nine Hundred Eighty Six and Three Paise Only 59860.30
15 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size [580 x 440]mm with integral type foot rests, etc., complete all as directed by Engineer-in-Charge. 14.00 Nos 6217.41 Rupees Six Thousand Two Hundred Seventeen and Forty One Paise Only 87043.74
16 Providing and laying cement concrete (1:2:4) (1Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), etc., complete all as directed by Engineer-in-Charge. 13.00 Cu m 9091.01 Rupees Nine Thousand Ninety One and One Paise Only 118183.13
17 Providing and fixing G.I. pipes 20mm dia complete with G.I. fittings such as T 's, bends, unions, collars, nipples, reducers and clamps, i/c cutting and making good the walls in CM (1:4), laid in trenches and by clamps on walls with necessary cutting, threading, etc., complete all as directed by Engineer-in-Charge. 152.00 R m 401.76 Rupees Four Hundred One and Seventy Six Paise Only 61067.52
18 Providing and fixing G.I. pipes 25mm dia complete with G.I. fittings such as T 's , bends, unions, collars, nipples, reducers and clamps, i/c cutting and making good the walls in CM (1:4), laid in trenches and by clamps on walls with necessary cutting, threading, etc., complete all as directed by Engineer-in-Charge. 84.00 R m 506.86 Rupees Five Hundred Six and Eighty Six Paise Only 42576.24
19 Providing and laying anti skid Ceramic glazed floor tiles of size [300 x 300]mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make and shade laid on 20mm thick cement mortar (1:4), jointing with grey cement slurry @ 3.3kg/Sq m including pointing the joints with white cement and matching pigment, etc., complete all as directed by Engineer-in-Charge. 85.00 Sq m 1007.43 Rupees One Thousand Seven and Forty Three Paise Only 85631.55
20 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar (1:3) and jointing with grey cement slurry @ 3.3kg per Sq m, including pointing in white cement mixed with pigment of matching shade, curing, etc., complete all as directed by Engineer-in-Charge. 360.00 Sq m 1164.90 Rupees One Thousand One Hundred Sixty Four and Ninety Paise Only 419364.00
21 Providing and fixing wash basin with Pedestal, C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size [550 x 400]mm with single 15mm C.P. brass pillar tap, etc., complete all as directed by Engineer-in-Charge. 15.00 Nos 3273.02 Rupees Three Thousand Two Hundred Seventy Three and Two Paise Only 49095.30
22 Providing and fixing white vitreous china flat back half stall urinal of size [580 x 380 x 350]mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern, etc., complete all as directed by Engineer-in-Charge. 24.00 Nos 11090.66 Rupees Eleven Thousand Ninety and Sixty Six Paise Only 266175.84
23 Providing, fixing, testing and commissioning trap (floor trap) of approved make with 100mm inlet and 75mm outlet of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors , connection with PVC soil / waste pipe, necessary 150mm thick cement concrete (1:2:4) for embedding the trap, etc., complete all as directed by Engineer-in-Charge. 45.00 Nos 543.34 Rupees Five Hundred Forty Three and Thirty Four Paise Only 24450.30
24 Providing and fixing [600 x 450]mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers, etc., complete all as directed by Engineer-in-Charge. 20.00 Nos 1477.27 Rupees One Thousand Four Hundred Seventy Seven and Twenty Seven Paise Only 29545.40
25 Providing and applying internal wall and ceiling painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50grams / litre after applying white cement based putty of average thickness 1mm over the plastered wall surface including preparation of the surfces, with a coat of low VOC primer with emery paper to bring to smooth and even including applying additional coats wherever required to achieve even shade and colour of approved brand, etc., complete all as directed by Engineer-in-Charge. 350.00 Sq m 342.50 Rupees Three Hundred Forty Two and Fifty Paise Only 119875.00
26 Providing and fixing C.P. brass toilet paper holder of standard size and brand on wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88gms, etc., complete all as directed by Engineer-in-Charge. 11.00 Nos 738.38 Rupees Seven Hundred Thirty Eight and Thirty Eight Paise Only 8122.18
27 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105gms, etc., complete all as directed by Engineer-in-Charge. 14.00 Nos 154.67 Rupees One Hundred Fifty Four and Sixty Seven Paise Only 2165.38
28 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms, etc., complete all as directed by Engineer-in-Charge. 14.00 Nos 651.33 Rupees Six Hundred Fifty One and Thirty Three Paise Only 9118.62
29 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690gms, 15mm nominal bore, etc., complete all as directed by Engineer-in-Charge. 32.00 Nos 734.02 Rupees Seven Hundred Thirty Four and Two Paise Only 23488.64
30 Supplying and fixing CP wall Flange of approved manufacture for angle cock bibtap, urinals, washbasin, etc., complete all as directed by Engineer-in-Charge. 110.00 Nos 63.56 Rupees Sixty Three and Fifty Six Paise Only 6991.60
31 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20mm nominal bore, etc., complete all as directed by Engineer-in-Charge. 17.00 Nos 496.07 Rupees Four Hundred Ninety Six and Seven Paise Only 8433.19
32 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading beyond 50m initial lead, for all leads upto 10Kms including all lifts involved, etc., complete all as directed by Engineer-in-Charge. 37.00 Cu m 673.75 Rupees Six Hundred Seventy Three and Seventy Five Paise Only 24928.75
33 Providing and fixing factory made P.V.C. door frame of size [50 x 47]mm with awall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150mm long brackets of [15 x 15]mm M.S. square tube, the vertical door frame profiles to be reinforced with [19 x 19]mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturer’s specification, etc., complete all as directed by Engineer-in-Charge. 121.00 R m 452.66 Rupees Four Hundred Fifty Two and Sixty Six Paise Only 54771.86
34 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of [19 x 19]mm for styles and [15 x 15]mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on both side forming styles and 5mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10mm (5 mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm + 2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive, as per direction of Engineer-in-charge, manufacturer's specification & drawing 30mm thick plain PVC door shutters, etc., complete all as directed by Engineer-in-Charge. 42.00 Sq m 2924.27 Rupees Two Thousand Nine Hundred Twenty Four and Twenty Seven Paise Only 122819.34
35 Cement mortar (1:4) plastering 15mm thick for brick/concrete surfaces, finished smooth with trowel including lime rendering for walls surfaces including scaffolding, curing, etc., all complete as directed by Engineer-in-Charge. 410.00 Sq m 366.98 Rupees Three Hundred Sixty Six and Ninety Eight Paise Only 150461.80
36 Providing and fixing granite stone slab of approved shade with table rubbed, edges rounded and polished both sides, of size [1500 x 600]mm deep and 18mm thick, fixed in urinalpartitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete (1:2:4) (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) and finished smooth, etc., complete all as directed by Engineer-in-Charge. 15.00 Sq m 3722.55 Rupees Three Thousand Seven Hundred Twenty Two and Fifty Five Paise Only 55838.25
37 Burnt Brick masonry in CM (1:6) with, table moulded bricks of class designation 7.5 in all shapes and sizes for chambers, drains, wall partitions, etc., complete all as directed by Engineer-in-Charge. 19.50 Cu m 8365.90 Rupees Eight Thousand Three Hundred Sixty Five and Ninety Paise Only 163135.05
38 Polishing on wood work with French polish, One or more coats on old work, including preparation of surface, cleaning and applying the polish to give a glossy finish, etc., complete all as directed by Engineer-in-Charge. 20.00 Sq m 206.53 Rupees Two Hundred Six and Fifty Three Paise Only 4130.60
39 Supplying and fixing Sign board / Name board using unbreakable plastic acrylic with vinyl or other mixed colour of letters of size 50mm along with logos of GENTS / LADIES of size 150mm for toilets, etc., complete all as directed by Engineer-in-Charge. 9.00 Nos 1016.95 Rupees One Thousand Sixteen and Ninety Five Paise Only 9152.55
40 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.50m in width as well as 10Sq m on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.50m in all kinds of soil, etc., complete all as directed by Engineer-in-Charge. 56.00 Cu m 163.08 Rupees One Hundred Sixty Three and Eight Paise Only 9132.48
41 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations, etc., in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and lift up to 1.50m, etc., complete all as directed by Engineer-in-Charge. 45.00 Cu m 180.07 Rupees One Hundred Eighty and Seven Paise Only 8103.15
42 Providing and laying (1:4:8) (1 Cement : 4 coarse sand (zone-III) 8 graded stone aggregate 40mm nominal size for bed concrete in manholes, chambers, etc., complete all as directed by Engineer-in-Charge. 1.00 Cu m 6258.38 Rupees Six Thousand Two Hundred Fifty Eight and Thirty Eight Paise Only 6258.38
43 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more, etc., complete all as directed by Engineer-in-Charge. 300.00 Kgs 99.08 Rupees Ninety Nine and Eight Paise Only 29724.00
44 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, 30mm thick including ISI marked Stainless Steel butt hinges with necessary screws, etc., complete all as directed by Engineer-in-Charge. 10.00 Sq m 2910.48 Rupees Two Thousand Nine Hundred Ten and Forty Eight Paise Only 29104.80
45 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with : 4mm thick glass panes including removal of old broken glasses, etc., complete all as directed by Engineer-in-Charge. 21.00 Sq m 978.13 Rupees Nine Hundred Seventy Eight and Thirteen Paise Only 20540.73
46 Painting with synthetic enamel Paint of required shade. Two or more coat applied @ 0.90 ltr /10Sq m over an under coat of primer applied @ 0.75 ltr / 10Sq m of approved brand or manufacture, etc., complete all as directed by Engineer-in-Charge. 150.00 Sq m 161.92 Rupees One Hundred Sixty One and Ninety Two Paise Only 24288.00
47 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, etc., complete all as directed by Engineer-in-Charge. 2000.00 Ltr 10.11 Rupees Ten and Eleven Paise Only 20220.00
48 Providing and laying cement concrete (1:5:10) (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all-round drainage pipes including bed concrete as per standard design : 150mm diameter S.W. pipe, etc., complete all as directed by Engineer-in-Charge. 57.00 R m 1083.97 Rupees One Thousand Eighty Three and Ninety Seven Paise Only 61786.29
Sub Total Rupees Twenty Four Lakh Seventy Three Thousand Eight Hundred Ninety Four and Twenty Paise Only 2473894.20
The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount
Tenderer's Quote (Excluding GST) 2473894.20 BELOW % 2473894.20
Add 18% GST Rupees Four Lakh Forty Five Thousand Three Hundred and Ninety Five Paise Only 445300.96
Grand Total (Including GST) Rupees Twenty Nine Lakh Nineteen Thousand One Hundred Ninety Five and Fifteen Paise Only 2919195.16
Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.
WARNING: PLEASE ENTER PERCENTAGE QUOTE
HINDUSTAN AERONAUTICS LIMITED
Facilities Management Division
Pre-Qulification Profile (To Be uploaded along with Part A)
Tender Ref No. or Contract No.: HAL/FMD/R-40/24-25
Name of Work: Repair and Refurbishing of Toilets at various Shops and Manhole repair of Sewage Line near FTC with the Allied Civil Works in RWRDC Division, HAL [DC].
Estimated Amount in Rs.: 2920000
Tender Notice Date : 10.08.2024
PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3
Sl.No Description Details Enclosed / Not Enclosed Remarks
1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual/firm/company
2 Type of ownership PlsEnter Type of Ownership
If Other, please specify
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc., Pls enter Details of Constitution
4 Address for correspondence: Pls Enter Address
5 (a) PAN No.: Pls Enter Pan NO
5 (b) Service Tax Registration No
5 (c ) Goods and Service Tax ID No.
6 Contact details
Contact person name Please Enter Contact person Name
Mobile No. Pls Enter Mobile No
Ph. No. with STD code
FAX No. with STD code 3 #N/A
7 Registered Contractor
If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1
Registration No. 199999 7 F 2
Category 200000 6 G 3
PEMD Amount ( If paid ) 499999 6 H 4
8 I.T Returns for past 03 years 999999 5 J 6
2023-24 Pls Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7
9 Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3
YEAR TURN OVER IN Rs. Enclosed / Not Enclosed REMARKS 5000000 2
2022- 2023 Rs. Pls Enter Turn over in Rupees for all the 3 years 7499999 2
Average annual Financial turn over 0.00 876000.00
Avg Annual Turnover criteria is not met 10000000 1
10 ESI & PF Nos with proof Nos Enclosed / Not Enclosed
ESI Registration No/. with proof if any Remarks if any
PF Registration No. with proof if any
11 Bank(s) details: [Copy of the cheque leaf to be uploaded]
Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Name of the Bank
Type of Account
12 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission solvency cal
Name of Bank & Branch Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs #REF! 28-Jun 0 40000
Date of Issue 200000 40000
Value in Rs. 200001 150000
Solvency value is NOT as per NIT
13 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender. 1168000 500001 250000
Completed similar works during last 7 years Pls Select %of similar works completed during last 7 years 1000000 250000
Work NoI Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000
Brief Description of Work: Please enter Details for Work No 1 2000000 500000
Completed value of Work in Rs. 2000001 1000000
Date of Commencement of Work 4000000 1000000
Date of Actual Completion of Work: 4000001 2000000
Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000
Brief Description of Work: Pls Enter Details for Work No II
Completed value of Work in Rs.
Date of Commencement of Work:
Date of Actual Completion of Work: work done
Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal #REF! 2555
Brief Description of Work: Pls Enter Details for Work No III #REF!
Completed value of Work in Rs.
Date of Commencement of Work:
Date of Actual Completion of Work:
14 Details of person holding the power of Attorney (If different from contact person)
Name Related Document to be Uploaded to eProcurement Portal
Mobile No. Pls Enter Details for Person holding Power of Attorney
Ph. No. with STD code
FAX No. with STD code
15 DECLARATION I
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.
16 DECLARATION II
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Pls Accept the Delaration II
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN23.pdf
TENDER_DOCUMENT • 2.26 MB
40PB.pdf
TENDER_DOCUMENT • 0.36 MB
40PQ.pdf
TENDER_DOCUMENT • 0.21 MB
40PBF.xlsm
TENDER_DOCUMENT • 0.05 MB
40TB.pdf
TENDER_DOCUMENT • 2.59 MB
40PQF.xlsm
TENDER_DOCUMENT • 0.03 MB
40ECSForm.pdf
TENDER_DOCUMENT • 0.46 MB
40amd.pdf
TENDER_DOCUMENT • 0.09 MB
40Undertaking.pdf
TENDER_DOCUMENT • 0.55 MB
40Checklist.pdf
TENDER_DOCUMENT • 0.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .