Services/Supply/SITC/Item of works on urgent basis for the works

Amount

Providing position cement concrete of specified grade All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing position cement concrete of specified grade All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)

Providing cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level 1:5:10 (1 cement : 5 coarse sand (zone-III) : 10 graded stone aggregate 40 mm nominal size

Providing synthetic Polyester triangular fibre of length 12mm, effective diameter 10-40 microns

Centering and shuttering including strutting, propping etc. for : Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. for : Suspended floors, roofs, landings, balconies and access platform

Supply of Steel reinforcement for R.C.C. work Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.(Note :- Cement content considered in this item is @ 330 kg/cum).

Providing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture Area of Slab over 0.50 Sq.M

Providing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, in urinal partitions by cutting a chase of appropriate width with chase cutter

Providing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados,

Providing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. Fixed to openings /wooden frames with rawl plugs screws etc

Providing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 250x10 mm

Providing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 150x20 mm

Providing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 100 mm

Providing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete Single rubber stopper

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges Extruded section profile size 48x40 mm

24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness.

Providing PVC Door Frame of size 50X47 mm with a thickness of 5mm(+0.2 mm),made out of single piece extruded pvc profile ,with mitred cut joint with 2 nos of PVC braket of size 190mmx100mm long arms of cross section size 35x15mm &self driven self taping screws, including providing EPDM rubber gasket weather seal throughout the frame ,including jointing 5mm PVC frame strip profile using 8x100 mm long anchor fasteners complete,all as per manufacturer specification

35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded PVC profiles 5mm(=+0.2mm) thick having styles &rails (except lock rail)of size 95 mmX35mmX5mm ,out of which 75mm shall be flat and 20 mm shall be tapered (on both side)having one side thickness of 15 mm integrally extruded on hinge side of the profile for better screw holding power including reinforcing with ms tube of size 40 mm x20mmX1mm joints of styles &rails to be mitered cut and joint with the help of PVC solvent cement ,self driven self tapping screws & M.S rectangle pipes braket of size 190mmX 100 mm of cross section size 35mm X17mmX1mm at each corner single piece extruded 5mm thick solid PVC lock rail of size 115 mmX 35mm out of which 75 mm to be flat and 20 mm to be tapered at both ends having 15mm solid core in middle of rail section integrally extruded and self driven self tapping screws of 125mmX11mm including providing 5 mm single piece solid PVC extruded sheet insertyed in the door as panel all complete as per manufacturer's specification and direction of engineerin-charge Decorative finish(wood grained finish)

Providing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealant shall be paid separately) Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm)

Providing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete

Providing angle iron frames for doors, windows and ventilators of mild steel Angle section of size 35x35x5 mm ,joints mitred and welded by angle iron 35x35x5 mm or 35x5mm flat pieces to the existing T iron frame or to the wall with dash fastener,including fixing of necessary butt hinges and screws.

Providing Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown

Providing vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS:15622, of approved make in all colours and shades Size of Tile 600x600 mm

Providing Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps Size of Tile 600x600 mm

Providing wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382 (i) Single socketed pipes 110 mm diameter

Providing wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382110 mm bend

Providing wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382 110 mm shoe

Providing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length 110 mm

Providing plaster of paris putty

Providing water thinnable cement primer of approved brand and manufacture Water thinnable cement primer

Providing Acrylic Sinooth exterior paint of required shades: Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm.

Providing Decorative Architectural base plaster/Texture finish of 'Off white" colour. The composition of base plaster/Texture material shall be the manufacturer with required proportion of marble poweder, silica sand particles and quartz materials mixed with exterior surface with 'altek" (M/s NCL Altex & Seccolar Ltd)or equavalent make /brand.

Providing acrylic emulsion paint of approved brand and manfacture Two or more coats on new work(Ceiling And internal Walls)

Providing synthetic enamel paint of approved brand and manufacture two or more coats on new work

Providing Acrylic Weather proof Emulsion paint having anti algal and anti fungus properties like weather shield" of M/s Dulux/Apex" (M/s Asian Paints Ltd) or equivalent make. brandof approved colour applied over a coat of exterior wall primer "X2"(M/s Asian Paints ltd) or equivalent make/brand complete as per the manufacturers specifications French Spirit Polishing

Providing white cement based putty of average thickness 1 mm, of approved brand and manufacturer.

Providing acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour Two coats

Providing premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two Coats

Provding priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Providing synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

French spirit polishing : One or more coats on old work

Providing Premium Acrylic Smooth exterior paint with Silicone additives of required shade : Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

Providing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc.

Floor Mounted white vitrous china double trap syphonic WC with 10 litre cistern and all fitting & fixtures ,seat cover etc

Providing graded stone aggregate (size range 53 mm to 0.075 mm )

Providing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete. W.C. pan with ISI marked white solid plastic seat and lid

Providing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern. White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete : Semi rigid Pipe : 32 mm dia

Providing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing soil, waste and vent pipes : Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 : 100mm dia

Providing soil, waste and vent pipes : Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 : 75 mm dia

Providing M.S. holder-bat clamps of approved design : For 100 mm dia pipe

Providing M.S. holder-bat clamps of approved design : for 75 mm dia pipe

Providing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 : 100 mm dia

Providing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 : 75mm Dia

Providing plain bend of required degree Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905: 100mm dia

Providing plain bend of required degree Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905: 75mm dia

Providing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 : 100x100x100 mm

Providing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 : 75x75x75 mm

Providing terminal guard Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 100mm

Providing terminal guard Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 75mm

Providing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 : 100 mm inlet and 75 mm outlet

Providing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. 32 mm nominal outer dia pipes

Providing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. 40 mm nominal outer dia pipes

Providing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. 50 mm nominal outer dia pipes

Providing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. 20 mm nominal outer dia pipes

Providing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings 25 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. 32 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. 40 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. 50 mm nominal outer dia Pipes

Providind G.I pipes complete with G.I fitting and clamps 20mm dia nominal bore

Providing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

Providing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore

Providing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore

Providing brass ferrule with C.I. mouth cover including boring and tapping the main : 20 mm nominal bore

Providing C.P.brass shower rose with 15 or 20 mm inlet 150mm diameter

Providing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : Class II 100mm Dia

Providing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : Class II 150mm dia

Providing G.I. Union in G.I. pipe and making long screws etc. complete (New work) : 25 mm nominal bore

Providing G.I. Union in G.I. pipe and making long screws etc. complete (New work) : 32 mm nominal bore

Providing G.I. Union in G.I. pipe and making long screws etc. complete (New work) : 40 mm nominal bore

Providing G.I. Union and threading the pipe and making long screws25 mm nominal bore

Providing G.I. Union and threading the pipe and making long screws32 mm nominal bore

Providing G.I. Union and threading the pipe and making long screws 40 mm nominal bore

Providing C.p.brass bib cock of approved quality conforming to IS:8931: 15mm nominal bore

Providing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms 15 mm nominal bore

Providing C.p.brass long body bib clock of approved quality conforming to IS standards and weighing not less than 690 gms 15mm nominal bore

Providing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 15 mm nominal bore

Providing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : 100 mm Diameter

Providing D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523 : Up to 600 mm dia

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including the cost of rubber gasket : 100 mm Dia Pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including the cost of rubber gasket : 150 mm Dia Pipes

Providing S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : 100 mm dia Ductile Iron Class K-9 pipes

Providing S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : 150 mm dia Ductile Iron Class K-9 pipes

Providing CP towel rail 600 mm long made of JAGUAR model no. CAN-1101N or equivalent etc., complete with brackets fixed with CP brass screws with concealed fitting

Providing CP brass Health Facut of JAQUAR make or equivalent as per the direction of Engineer-in-charge complete.

Providing glazed stoneware pipes class SP 1. 300mm diameter

Providing square-mouth S.W. gully trap class SP-1 complete with water tight C.I cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design. 100x100 mm size P type

Providing water proofing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrance, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrance manufacture of density at 25°C, 0.87 - 0.89 kg/ litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc., and preparing the surface complete.

Providing fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/ system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge

Supplying vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150mm nominal size dia

Providing bonding coat of approved adhesiv as per specifications and direction of Engineer-In-charge complete in all respect. Epoxy bonding adhesive having coverage2.20 Sq.m/Kg of approved make

Providing SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. 50 mm average thickness in 3 layers

Providing approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineerin-Charge.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m Hard rock (blasting prohibited) Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil

Extra for every additional lift of 1.5 m or part thereof for disposal of available earth. All kinds of soil

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

carriage of material-upto 5km

carriage of material-beyond 5km upto 10 km per km

carriage of material-beyond 10km upto 20 km per km

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth

Extra for laying rcc in or under water and or liquid mud including cost of pumping or bailing out water & removing slush, etc..,

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work

Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement moxed with pigment of matching shade complete, (Tiles will be issued departmentally) Ceramic Tiles.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground with in 50 Mts lead. With cement mortar 1:4 ( 1 Cement : 4 Fine sand)

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under ,including cutting the patch in proper shape ,raking out joints and preparing plastering the wall surface with white cement based polmer modified seft curing mortar,including disposal of rubbish,all complete as per as the direction of Engineer-in charge-charge

Dismantling W.C. pan of all sizes including dispasal of dismantled materials i/c malba all complete as per direction of \Engineer in charge

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix

Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres leadFor thickness of tiles 10 mm to 25 mm

Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in-charge

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead 100 mm dia pipe

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: Up to 150 mm diameter

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in-charge

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

Dismantling of taps/Stop cock/bib cock including stacking of useful materials near the site and disposal of unserviceable materials with in 50 metres lead.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore

Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Fixing square mouth S.W.gully trap class SP 1 complete with C.I .grating brick masonry chamber with water tight c.I.cover with frame of 300x300 mm size (inside)the weight of cover to be not less than 4.50kg and frame to be not less than 2.70 kg as per standard design with common burnt clay F.P.S(non modular)bricks of class designation 7.5 180x150mm size P type

Constructing brick masonry circular manhole 1.52m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1cement :4 coarse sand)inside cament plaster 12 mm thick with cement mortar 1:3 (1 cement:3 coarse sand)finished with a floating coat of neat cement, foudation concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 40 mm normal size)and making necessary channel in cement concreate 1:2:4(1:cement:2 coarse sand: graded stone aggredate 20mm nomonal size)finished with Floating coat of neat cement all complete as per standard design 2.30m deep with SFRC Cover and frame (heavy duty HD20 grade designation)560 mm internal diameter conforming to I.S.12592, total weight of cover and frame to be not less than 182 kg.fixed in cement concreate 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20 mm nominal size)including centering,shuttering all complete .(Excavation ,foot rest and 12 mm thick cement plaster at the external surface shall ba paid for separately): with common burnt clay F.p.s(non moduler)bricks of class designation

Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m with common burnt clay F.p.s(non moduler)bricks of class designation 7.5

Grading roof for water proffing treatment with: Cement concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded stone aggregate 20 mm nominal size) i/c mixing with synthetic polyster triangular fibre cost of which shall be paid seperately vide the relevant item. Note: Mother roof slab shall be made rough (broom finish) before setting to receive the grading concrete.

Groove cutting to form a grid of 1.5 x 1.5 m with grooves of size 3mm wide 10mm deep with 24 to 48 hours after laying the grade of concrete over roofs and filling the grooves after poper curing of the grading concrete with cold PU sealant( appropriate type) all complete as per the directions of the engineer-in-charge.

Assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150mm nominal size dia

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 75 mm average thickness

Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars up to 12 mm diameter

Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars above to 12 mm diameter

Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge

Hire charges for Tractor with trolley

Hydraulic Excavator (3D) with driver and fuel

Water Tanker 5 to 6 KL capacity

Generator 100 KVA/125 KVA

Hire charges of TATA 407 or equivalent for local shifting

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit with modular switch modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. Group - B

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit with modular switch modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. Group - C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. Group A

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. Group B

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3x1.5 sq.mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required 6x1.5 sq.mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required 3x4.0 sq.mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required 6x4.0 sq.mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required 3 x 6 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required 6x6 sq.mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required 4x10 sq.mm + 2x6 sq.mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required 4x16 sq.mm + 2x6 sq.mm

Supplying and fixing of PVC cable management system not less than following size on surface complee with all necessary accessories etc as required 50 x 50 mm

Supplying and fixing of PVC cable management system not less than following size on surface complee with all necessary accessories etc as required 100 x 50 mm

Supplying and fixing call bell/ buzzer suitable for DC/AC single phase, 230 V, complete as required

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required 1 run of cable

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required 2 run of cable

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 32 mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm)

Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 6 Module ( 200 mm x 75 mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 5/6 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 15/16 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 6pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supply, Installation, Testing and commissioning of electric ceiling fan 5 star rated of 1200 mm sweep with double ball bearing complete with capacitor, 300 mm down rod, canopies, three number blades made of aluminium alloy but without speed regulator, suitable for operation on single phase AC, 230 Volts, 50 HZ supply i/c connections etc as required.

Supply, Installation, Testing and Commissioning of Surface mounted Batten type high efficiency performance decorative LED luminaire including LED lamp withlumens not less than 3500 lumens and wattage not more than 40 watts, colour temperature not less than 5700 K, complete with LED module, driver unit, built in 2KV surge protector duly wired directly on ceiling/wall, including connections with 1.5 sq.mm FRLS PVC insulated copper conductor, single core cable and earthing etc., as required.

Supply, Installation, Testing and commissioning of surface mounted round/square type high efficiency performance decorative LED luminaire with lumens output not less than 1000 lumens, colour temperature not less than 5700K, and wattage not more than 12 watts, complete with LED module, driver unit, duly wired directly on ceiling/wall, including connections with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc., as required.

Supply, Installation, Testing and commissioning of surface mounted batten type mirror LED luminaire including LED lamp with lumens not less than 1200 lumens and wattage not more than 15 watts, , colour temperature not less than 5700K, non-yellowing diffuser, complete with LED module, driver unit, built in 2KV surge protector duly wired, directly on ceiling/wall including connections with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc., as required.

Supply, Installation, testing and commissioning of medium duty Exhaust fan of 225 mm dia, speed not less than 1370 RPM body made of metal, metal blades in the existing opening along with fixing of GI grill on the existing wall on existing hole to suit to the size of the above fan, connections etc., as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required. For 4 way, Double door TPN MCBDB

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required. For 6 way, Double door TPN MCBDB

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Tripple pole

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole and Neutral

Supplying and fixing following rating, four pole, 415 V, in the existing MCB DB complete with connections, testing and commissioning etc. as required 63 A

Supplying and fixing following rating, tripple pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required 63A

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A

Supply and fixing of following ways surface/recess mounting, vertical type, 415 V, TPN MCCB distribution board sheet steel dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but with out MCB,s and incomer) as required. (NOte: Vertical type MCB TPDB is normally used where 3 phase outlets are required). 6 way (6+18), Double door

Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required 100 A, 16 KA, TPMCCB

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Fabrication, Supplying, Installation, testing and commissioning of in door type wall/floor mounted weather & vermin proof finish compartmentalized, modular, totally enclosed type Meter Panel Board.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm

Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade is required. 3½ X 95 sq. mm (45mm)

Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade is required. 3½ X 120 sq. mm (45mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm (28mm

Fabrication, Supplying, Installation, Testing and commissioning of out door type MV panel with required i/c of out going switches.

Supply of XLPE insulated PVC outer sheathed aluminium conductor armoured 1.1 KV grade UG cable confirming to IS: 7098 Part-I, 1998 of 4 X 16 Sq.mm

Supply, Installation, Testing and commissioning of electric ceiling fan 5 star rated of 1200 mm sweep with double ball bearing complete with capacitor, 300 mm down rod, canopies, three number blades made aluminium alloy, but without speed regulator, suitable for operation single phase AC, 230 Volts, 50 Hz supply and Low voltage operation etc., as required.

Supply, Installation, Testing and commissioning of surface mounted LED batten fitting having system output not lessthan 2000 lumens and wattage not more than 20 W and latest LED technology of consistent light out put, stable color performance and colour temperature not less than 5700K and energy saving, suitable for use on 230 V, 50 Hz, A.C. supply as required.

Supply, Installation, Testing and commissioning of surface mounted round/square type high efficiency performance decorative LED luminaire with lumens out put not less than 1000 lumens, colour temperature not less than 5700K and wattage not more than 12 Watts, complete with LED module, driver unit, duty wired directly on ceiling/wall, including connections with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc., as required.

Supply, Installation, Testing and commissioning of decorative wall mounted fancy wall bracket including retrofit 9 watts LED lamp, other required accessories suitable for operation on 230 volts, single phase, 50 Hz, AC supply complete as required.

Supply, Installation, Testing and Commissioning of 450 mm sweep HEAVY duty exhaust fan complete with all accessories including metal louvers/shutters and capable of operation on 230 volts single phase 50 hz AC supply including cartage etc., as required.

Panel Board for D, E, F, Floors including copper conductor submain cable etc.,

Supply, Installation, Testing and Commissioning of outdoor type FACTORY FABRICATED MV Compartmentalized, completely bolted system, as per IEC 61439-1, modular design INDOOR TYPE with single door arrangement, electrical panel, suitable for 415V, 3-Phase, 50HZ, 4 wire system with following ratings copper bus bars, free standing, totally enclosed, suitable for 3 phase and neutral, with following incoming and outgoing switches, meters, inter connections with suitable size cables/bars, complete with terminating arrangements with lugs, powder coating the panel, earthing with cable chamber suitable for incoming cable termination. Aluminium busbar chamber etc., Generally confirming to IEC 61439-1 amended up to date as per below description and in conjunction with techinical specifications/Single Line Diagram etc., complete as required i/c providing and fixing the following switch gear complete as required. (i) Incomings a) 200 Amps - 1 no. (ii) Outgoings a) 100 Amps - 3 Nos

Supply, installation, testing, Commissioning of grid interactive roof-top solar photo-voltaic power generation system including space frame and AMC for 5 year etc. as required

in adition to 10 years AMC Provided AMC fpr the POWER Plant ( 330 KWP) including inverter

Proving extra elevation for solar power plant by using G.I/M.S structure

Supply, Installation, Testing and commissioning of Passaenger Lift in the existing lift shaft. Lift - 8 Passenger (G+5) @1.0 m/s (Basheer Hostel)

Supply, Installation, Testing and commissioning of Passaenger Lift in the existing lift shaft. Lift - 13 Passenger (G+5) @1.5 m/s (MBC - Right wing)

Supply, Installation, Testing and commissioning of Passaenger Lift in the existing lift shaft. Lift - 13 Passenger (G+5) @1.5 m/s (Akka Mahadevi Hostel)

Supply, Installation, Testing and commissioning of Passaenger Lift in the existing lift shaft. Lift - 16 Passenger (G+5) @1.5 m/s (MBC - Left wing)

Lift - 20 Passenger (G+4) @1.5 m/s (Foreign Language Building)

Providing electrical cabling from the existing LT Panel, including earthing MCB DB's, shaft ligting etc as required per each lift.

Earth Works For Lift Pits

Concrete Work for Lift Pits & Lift Shaft

Reinforced Cement Concrete Work for Lift Pit & Shafts

Brick Work for Lift pit and Shafts

Marble and Granite Work for Lift Cladding

Finishing for Lift Shaft & Pit

Dismantling and Demolishing Lift service works

MS Work for Motor Fixing

Supply, Installation, Testing and commissioning of 13 Passaenger Capacity (884 Kgs), machine room less type, Electric traction Lift suitable for G+2 floors with all accessories and control equipment with Micro processor based V V V F with speed encoder drive including providing all safety features and one year free comprehensive vice from the date of installation etc., complete as required.

Provision for service connection cable including modification of existing MV Panel board etc., complete as required.

Civil component for providing Lift structure for G+2 Floor building including the structural frame work with RCC beams, Columns, Slabs including lift pit, Machine room, Brick walls, Finishing with Plastering and external finishing etc., complete as required.

RANA AND SONI ENTERPRISES PRIVATE LIMITED

SAFEBHARAT ENTERPRISES PVT LTD

buildskill projects Private limited