Raising of Boundary wall and other miscellaneous Work for safety of Guest House campus at OKHLA NEW DELHI

Amount

Cleaning and disposal of waste upto 2.0 Km by power transport i/c cost of all labour, T&P etc. complete.

CC 1:2:4 i/c cost of all material, labour T&P etc. complete .

Flush cement pointing in 1:2 cement mortar on stone masonry i/c cost of all material, labour T&P etc. complete .

Cut stone masonry in 1:3 CM i/c cost of all material, labour T&P etc. complete

Supplying and fixing of decorative 8 to 16 watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect as per direction of Engineer-In- Charge.

Supplying and laying of 25 sqmm 4 core cabel aluminum conductor PVC insulated armored sheathed cable 1100 volts grout with M.S. clamps of suitable size complete in all respect. Armoring shall be properly connected by clamps for decorative bollard light. as per direction of Engineer-In- Charge.

Supplying and fixing of metal clad T.P.H.R.C. type switch fuse unit of EE / L.T. and L.K. / Havells / Siemens made complete with H.R.C. fuse etc. on angle iron frame complete in all respect ( 32A and 415V ) for 20 decorative bollard light.

Replacing sand stone laid in cement mortar in 1:4 including necessary repairs and cement pointing with same mortar, including disposal of rubbish to dumping ground, all complete as per direction of Engineer-in-Charge. Red/ white / Green sand stone slabs 30 to 50 mm thick.

Providing and fixing steel glazed gates side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). 10.11.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Supplying, Installation, Testing & Commissioning of 34 feet dia Ring make in Jindal B Class grade Complete Holder assembly with Rubber coated paint for dome fountain.

Supplying, Installation, Testing & Commissioning of Clear Stream Jet Nozzle With Ball Joint Make in Brass with shine chrome (CNC Cutting) for dome fountain.

Supplying, Installation, Testing & Commissioning of DCC Programmable Controller for lights for dome fountain.

Supplying, Installation, Testing & Commissioning of Open well submersible pump with dust grill 15HP, pumps should be suitable for dome fountain according deign. Make: Compton / Kirloskar

Supplying, Installation, Testing & Commissioning of Electrical panel 16 Gauge CRC Sheet, powder coated, contactor overload relay with phase and on/off indication, protection circuit. Assembled with L&T or TC. As Suitable for Three Pump Operational Systems as water feature Required. Rating IP 65/65 (With Smart Shock Protection Circuit)

Supplying, Installation, Testing & Commissioning of 32mm to 90mm dia PVC/UPVC pipes (10 Kg/cm2) of make Prince/Supreme/Prakash or equivalent confirming including all UPVC fitring/ jointing with good quality solvent of required sizes and length for dome fountain.

Supplying, Installation, Testing & Commissioning of Manifold made of UPVC/PVC size of 90 mm dia and required Length complete for dome fountain.

Supplying, Installation, Testing & Commissioning of submersible flat/round cables PVC insulated PVC sheathed copper conductor of make Finolex/National/Kalinga complete as per the direction & entire satisfaction of Engineer in charge. Three core flat type 6 Square mm. Four Core 2.5 square mm. for dome fountain.

Supplying, Installation, Testing & Commissioning of Floating pad (3 Feet Dia made of FRP A Class, 4 Layer Resin Coating with wax filler & Water Proofing Coatting) with Complete Holder assembly, structure/Stands/ Holders made in heavy gauge Stainless Steel 304 (Cutting, Threading, Fixing, welding and painting complete.) for floating fountain.

Supplying, Installation, Testing & Commissioning of Flower Effect Jet Nozzle average Height 15- 18 feet With Complete required Materials. Nozzle Specification :- Bronze, Gunmetal, Brass Fine quality materiel Shine chrome made on new technology CNC Cutting for floating fountain.

Supplying and Installation of Programmable Waterproof, shockproof color changing 18Watt LED lights.

Supplying, Installation, Testing & Commissioning of DCC Programmable Controller for lights for floating fountain.

Supplying installation testing and commissioning of Single Phase horizontal mono set submersible Pump Set totally enclosed water filled squirrel cage induction motor water lubricated with oil seals with sleeves and thrust bearing having all rotating parts dynamically balanced for silent operation Suitable for three phase 50 HZ AC Supplying as per direction, instruction and entire satisfaction of Engineer-in- charge. Motor Body : CI Pump Body : CI Make : Kirloskar/Crompton or equivalent Capacity : 5 HP Single Phase Head 10 Mtr Suction & Delivery 65x50mm for floating fountain

Supplying, installation, testing and commissioning of outdoor type control panel suitable for fountain equipment including wiring, cabling, cable tray control wiring and earthing from control panel to motor, starters etc. The control panel shall be compartmentalize for individual outgoing and shall be made out of 16 SWG CRC sheet in grey color and shall be floor mounted with following. All fittings to be done as per direction of Company. for floating fountain.

Supplying, Installation & Testing of Plumbing material pipe fitting Elbow, tee, socket, reducer jointing all necessary plumbing item in water body’s (10kg/cm2 tested pipes) for floating fountain.

Supplying, installation and testing of Electrical material likes conduits pipes bend wire and Submersible wire required size 3core / 4core in water body for operating panel distance to be 15 MTR in water body (All wires are in Copper ) for floating fountain.

Supplying, fixing and testing of Anchor Wire for holding float in pond with required holding materials. For floating fountain.

UMESH CHANDRA MISHRA

M/S SHIV SHAKTI CONSTRUCTION