Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.3 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹45.3 L+₹1.0 L (2.32%)Rejected-Finance | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹45.9 L+₹1.6 L (3.59%)Rejected-Finance | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹46.8 L+₹2.5 L (5.65%)Rejected-Finance | L4 | Rejected-Finance Not lowest | |
| 5 | L5₹47.2 L+₹2.9 L (6.48%)Rejected-Finance | L5 | Rejected-Finance Not lowest |
Tender Value
₹44.5 L
EMD Value
₹89,000
Closing Date
28 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 860 EWS
GE 860 EWS
PROVN OF TECH EQPT STORE AND BATTERY CHARGING ROOM AT UNIFORM FORCE SIG REGT KIARI AND PROVN OF 02 X TOILET AND BATHROOM NEAR ORS LIVING ACCN AT FD HOSP KIARI UNDER GE 860 EWS
2023_MES_608208_1
8163/2023-24/E8
Open Tender
Civil Works
Item Rate
270 days
Kiari
Refer NIT
9 documents required · 9 mandatory
₹500
GE 860 EWS
₹89,000
Yes
23 Sept 2023
7 Jul 2023
31 Jul 2023
7 Jul 2023
28 Jul 2023
21 Jul 2023
Amount
Surface dressing n exc 15 cm deep in soft /loose soil complete all as specified and as directed.
Excavating in post holes (or similar holes)each n. exc 0.5 cum, getting out, returning, filling in and ramming earth broken rubble mixed with eart around, in layers not exc 25 cm complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard /dense soil complete all as specified and as directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.
M & L for Cement concrete type D-2 1:4:8 (40 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.
M &L Cement Concrete Type-B1 (1:2:4) ( 20 mm graded crushed stone aggregate) as in foundations,including rafts, footings complete all as specified and as directed.
M&L for reinforced cement concrete M-30 (Design Mix) using 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
M & L for Reinforced cement concrete (nominal mix) 1:2:4 ( 20 mm graded crushed stone aggregate) in chajjas complete all as specified and as directed.
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete complete all as specified and as directed.
Use and waste of formwork to Rough finished surfaces concrete chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed.
S & F Mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
M &L mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed.
S & F Mild steel work in roof trusses (framed ) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle,channel or flat sections) including distance pieces cleats etc complete all as specified and as directed.
M & L for Pre-cast cement concrete block masonry type C-1 1:3:6 (20 mm graded crushed stone aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:6, complete all as specified and as directed.
M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface broken stones or boulders complete all as specified and as directed.
Plinth protection 75 mm thick in PCC type C-1 1:3:6 (using 20 mm graded aggregate crushed stone aggregate) laid in alternate bays (not exc 2 Sqm each) finishing even smooth at top without using extra cement and providing joints throughout the thickness of plinth protectio, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.
M & L for Plain cement concrete 100 mm thick 1:2:4 type B-2 (40 mm graded crushed stone aggregate) as in floor finishes with smooth surfaces complete all as specified and as directed.
S & F for 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
S & F for Factory made shutter 35 mm thick 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
S & F 30mm thick Second class hard wood Glazed and skeleton windows,ventilators open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.sizes of members of shutters as specified in SSR Part I, Section 8 Clause 8.24(a) complete all as specified and as directed.
S & F 3.00 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and as directed.
M & L PCC type B-1 1:2:4 (20 mm graded crushed stone aggregate) for fixing hold fast complete all as specified and as directed.
S & F MS flat iron of size 25x3 mm as in hold fast conforimg to Fe 410-0 or Fe-310-0 complete all as specified and as directed.
15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even smooth without using extra cement, complete all as specified and as directed.
Rendering 15 mm thick on fair faces of brick wall or cement concrete surface in cement mortsr 1 :4 finished even smooth without using extra cement, complete all as specified and as directed.
S & F of 100 mm size extruded alluminium alloy with galvanised mild steel hinge pin type C-21 complete all as specified and as directed.
S & F Aluminium anodised, barrel tower bolts of extruded section with 150 mm long bolt and fixed complete all as specified and as directed.
S & F Aluminium handles, cast type, anodised 125 mm size complete all as specified
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250 mm long complete all as specified and as directed.
Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, 150 mm long complete all as specified and as directed.
S&F for 0.50 mm thick Pre- painted galvatume aluminum zinc coating GI based corrugated in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts complete all as specified and as directed.
M&L Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes etc. with riveted, bolted or welded attachment conforming to Fe 410-W (Gde E-250), complete all as specified and as directed.
Mild steel bolts neck exc 10 mm dia and n exc 15 mm dia, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each scre-wed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and treating with two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and as directed.
Preparing plastered new surfaces of wall and applying two coats of cement base paint with one coat of primer complete all as specified and as directed.
Preparing of new surface of wall of any description and applying two coats of distemper oil emulion, with one coat of primer complete all as specified and as directed.
Prepration of new wooden or wood based Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.
Surface dressing n.exc 15 cm deep in soft/loose soil complete all as specified and as directed.
M&L for Cement Concrete type D-2, 1:4:8 (20 mm graded crushed stone aggregate) 100mm thick as in Sub base complete all as specified and directed.
M&L for 40mm thick Cement Concrete type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in floor Sub base complete all as specified and directed.
M & L for coloured non-skid ceramic tiles 7 to 8 mm(square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc over and including 15 mm thick cement mortar screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.
M&L for colour glazed ceramic tiles in vertical surface 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat of cement mortar 1:4 complete all as specified and as directed.
S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified.
M&L 4 mm thick glass panes ordinary quality and glazing with oil putty in square n .exc 0.50 Sqm in each Pane etc complete all as specified and as directed.
M&L for preparing newly plastered surface and applying two coat of white wash on walls complete all as specified and directed.
S&F Rotational moulded water tank 500 liter capacity polyethylene water storage tanks (cylindrical vertical with closed top) triple layered, hoisted and fixed in position complete all as specified and as directed.
S&F 20 mm bore ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.
S&F in vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete including P/S traps complete all as specified and as directed.
S & F of PVC (Plastic polymer Cistern) low level white flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle etc and S & F of 32 mm dia PVC flush pipe of suitable length and making all connection complete all as specified and as directed.
S&F 15 mm dia bib tap chromium plated with cruth butterfly handle, screw down , screwed for iron pipe or brass ferrule complete all as specified and as directed.
S&F 75 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints, laid in trenches or fixed to wall complete all as specified and as directed.
S&F 75 mm dia PVC (SWR) bends any radius complete all as specified and as directed.
S&F 75 mm dia PVC floor trap , plain with grating including jointing with solvent. complete all as specified and as directed.
S&F 32 mm bore waste pipeLow density polyet-hylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls,or in floors, complete all as specified and as directed.
S&F Stop valves 15 mm chromium plated fancy type caste copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed ,complete all as specified and as directed.
S &F 16 mm dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) UN stablized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threated polypropylene random fittings laid in trenches etc. complete all as specified and as directed.
S&F15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
Excavation over areas n.exc 1.5m deep and and getting out in hard/dense soil complete all as specified and as directed.
Excavation over areas exc 1.5m deep and n.exc 3.00 m deep and getting out in hard/dense soil complete all as specified and as directed.
M & L for PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in foundation filling mass concrete and similar work complete all as specified and as directed.
M & L for Walling of random rubble uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed
M & L for Walling of random rubble stone masonary, uncoursed, well bonded, bedded and solidly hearted, laid dry complete all as specified and directed
M & L for providing RCC type B-1 1:2:4 using 20 mm graded crushed aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.
Use and waste of rough finished Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20 cm wide complete all as specified and as directed.
M & L Mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M & L for precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in cover slab for manhole set in cement mortar 1:4 including necessary form work complete all as specified and as directed.
M&L for Plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in coping, benching bed plates and the line including necessary form work and finishing all exposed surface of concrete as per clause 4.11.16.2(a) of SSR Part-I (2009) complete all as specified and as directed.
M & L for loose filling with broken bricks aggregates of gauge 80 to 150 mm in soakage pit, soakage wells complete all as specified and as directed.
S&F 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floors complete all as specified and as directed.
M&L Concrete bed 1:4:8 type D-2 to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested bore of pipe in 110 mm complete all as specified and as directed.
Supply only Integral Water proofing compound.
Supply, laying, testing and commissioning of LT UG cable XLPE insulated PVC sheathed galvanized steel strip armoured electric power cable with stranded aluminium conductor 1100 volts grade 10 sq mm 2 core confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it. 2. Excavation, earth work, sand cushioning and brick protection will be measured and paid separately under respective items.
Supply, laying, testing and commissioning of LT UG cable XLPE insulated PVC sheathed galvanized steel strip armoured electric power cable with stranded aluminium conductor 1100 volts grade 16 sq mm 4 core confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it. 2. Excavation, earth work, sand cushioning and brick protection will be measured and paid separately under respective items.
Material and labour for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40mm thick complete all as specified.
Sand cushioning to under ground electric cable all as per clause No 19.75 of MES SSR Part-I (2009)
M&L point wiring complete for one light / bell / exhaust fan point controlled by one no, 1-way, 5 Amps switch. with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casing and capping of 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl concealed MS sunken box of suitable size flush with wall surface, covered with & incl 3 mm thick bakelite, laminated hylem sheet / Gang box for top cover suitable for fixing of piano type switches / sockets etc, complete all as specified and directed for the following :- (Note : The cost of MS sunken box with 3 mm thick bakelite, laminated hylem sheet top cover is deemed to be included in quoted rate.)
All as per Srl item no 79.00 here-in-before but one socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch.
All as per srl item no. 79.00 here-in-before but for one socket outlet 3 pin, 5 Amps on same board.
All as per Srl item no 79.00 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for independent 15 Amp point.
Supply and fixing switch piano flush button single pole one way 5 Amps complete
Supply and fixing socket 2 in 1, 5 Amp, flush type complete all as specified and as directed by Engr-in-charge.
Supply and fixing switch socket combination multi purpose 2 in 1, 3 pin 5A/16A, 5 in 1 flush type complete all as specified and as directed by Engr-in-charge.
Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge.
Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all specified and as directed by the Engineer-in-Charge.
Supply and fixing angular lamp holder, PVC/Polycaronate type with back plate suitable for 12 watt LED bulb for batten fittings complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete
Supplying and fixing LED 12 Watt with 6500 K complete all as specified and directed by Engr-in-Charge
S&F DB, Single Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.
S&F DB, Single Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.
Supply and fixing MCB single pole and neutral 32 to 40 Amps , 240 volt, 10 KA, complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing MCB single pole 5 to 30 Amps, 240 volts, 10 KA complete all as specified and as directed by the Engineer-in-Charge.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed
Supply and fixing new energy saving LED Bulk head fitting 10 watt made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK07 as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed by Eng-In-Charge
Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 5 of SSR 2009 Part-I and connecting to CBDB’s as specified or indicated including testing on completion .
M/s Koul & Sons
M/S LOBZANG NORBOO
Rampal Singh Contractor
SHANTI ENTERPRISES
M/S LIBE & CO
osho traders
SHUBHAM ENGINEERS & BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .