ReConstruction of Jagannath Dev Mandir, Mouza. Athilagori under Booth no.113

Page No.- 2, Item No.- 4(A).

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) PWD Building Works schedule,

P.W.D, Page No. 47, Item No. 3

supplying and laying polythene Sheet ( 150 gm / sq.m) over damp proof couse or below flooring or roof terracing or in foundation trenches.

Page No.- 15, Item No.- 7(a) (rate analysis)

Brick work with 1st class bricks in cement mortar (1:4) (a) Foundation and plinth groung floor

P.W.D, Page No.- 26, Item no.- 10(i)

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety

P.W.D, Page No.- 43, Item no.- 40 (i)(I).

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m. (i)Tor steel JSW/JSPL/SHYAM/SRMB/BMASL/ELETROSTEEL/ SSL

P.W.D, Page No.- 42, Item no.- 36 (f).

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) i) Steel suttering or 9 to 12 mm thick approved quality ply board suttering in any concrete work.

Page No.- 62, Item no.- 32.

Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete. Area of each Granite slab > 0.6 upto 1.0 square metre. [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m]

Page No.- 189, Item No.-1(i)© (rate analysis)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (c) 15 mm thick plaster

Page No.- 192, Item No.-15 (rate analysis)

Neat cement punning about 1.5 mm thick in wall ,dado, window sills, floors etc .

Page No.- 114, Item No.-01

Wood work in door & window frame fitted and fixed complete including a protective coat of painting at the contact surface of the frame. ( b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. In Ground Floor

Page No.- 117, Item No.-01

Panel shutter for door and windows as per design (each panel consisting of single plank with out jionts) including fittings- 35mm thick shutters with 19mm thick panel. (a) Ordinary Teak wood In Ground Floor

Page No.- 104, Item No.-13

M.S./W.I. ornamental grill of approved design joints contineously welded ….. fitted & fixed with necessary screws & lugs. ( ii ) Weighing above 16 kg/ sqm In Ground Floor

Page No.- 200, Item no.- 1(a).

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Page No.- 200, Item no.- 2(A)(b)(ii).

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. On steel or other metal surface. Two coats ( with any shade exept white)

Page No.- 200, Item no.- 1(b).

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality For timber surface

Page No.- 200, Item no.- 2(iv).

Painting with best quality synthetic enamel paint of approved make and brand with two coats super gloss any shade except white. (a ) On timber surface

Page No.- 196, Item no.- 10.

Acrylic Distemper to interior walls or celling... incl cleaning washing smoothening surface (b) 2 coats

Page No.- 196, Item no.- 08.

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface…. Complete as per manufacturer's specification and as per direction of EIC. (a) One coat In G.F.

Page No.- 197, Item no.- 17.

Protective and Decorative Arcylic exterior emulsion paint of approved quality, ,,, as per direction of EIC to be applied over acrylic primer as required. (a)Normal acrylic emulsion ( Outside wall )

P.W.D (Roads)Page No.- 270/ Item No. - 8.07

Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of section 100 x 13 mm. and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc. complete.)

Add 18% GST (Sl No. 1 to 20)

Add 1% Welfare Cess