External Electrification Work for 24 And 96 Qtrs Phase II At 6th Bn Rajhi Jabalpur

Amount

Supplying and erection single length support for 33KV/11KV line complete with aligning and keeping it in truly vertical position, including digging pit of required size in all type of soil/rocks, filling with 1:3:6 cement concrete of0.50 mtr. dia. around the pole up to ground level includingmuffing of 0.45 mtr. dia. from ground level to 0.45 mtr. high as per specifications with 20 cm. thick base foundation in1:4:8 cement concrete as required, refilling the pit withboulder and soil as required, including painting of pole withbitumen paint below GL and two coats of red oxide and two coats of aluminium paint or synthetic enamel paintas directed etc as per specification complete The depth of burying of pole shall be 1/6th of the length of pole.H beam 152x152mm or 150x150mm 37.1 Kg./M. weight (A) 13 Mtr.long

STAY SET :Supplying and erection of GI/MS stay set complete with stay rod, anchor plate of size 300x300x5mm, thimble,stay rod, anchor plate of size 300x300x5mm, thimble,stay clamp, turn buckle, bow tightener etc. with stay wire, strain insulator, nut bolts as per specifications including excavation in all type of soil / rocks and foundation in cement concrete 1:3:6 of required size and other necessary materials complete as required as per specifications. GI Stay Rod 20mm dia 1.8 m long with 7/4mm stay wire for HT line

AAAC CONDUCTOR:-Supplying and drawing AAAC conductor of approved make with stringing making off complete with binding at existing insulator, jointing, jumpering, teeing off connecting etc. as required and clearing of obstacles (if any). (A) AAAC Conductor 55 sqmm aluminum or Equivalent (Rabbit) (0.05sqinch)

AAAC CONDUCTOR:-Supplying and drawing AAAC conductor of approved make with stringing making off complete with binding at existing insulator, jointing, jumpering, teeing off connecting etc. as required and clearing of obstacles (if any). (B) AAAC Conductor 100 sqmm aluminum or Equivalent (Dog) (0.10 sqinch)

11 KV A.B.SWITCH-Supplying, Fixing, Testing and Commissioning of Gang operated air break off load disconnecting switch complete with self aligning type spring loaded fixed contact and knife type moving contact made of hard drawn electrolytic copper, GI phase coupling shaft, GI operating rod with handle, post insulator, contact gun, GI base channel, 7/8mm dia GI rod for arching horn etc. having verticle break and horizontal mounting type complete as required. (A)11KV 200Amps AB Switch (Single stack & two insulator Padestals per phase)

Supplying and erection of steel tubular pole swaged type as per IS:2713 1980 Complete with baseplate and top Canopy (with G.I. pipe bracket as required), supports complete with digging and keeping it in truly vertical position i/c digging pit of required size filling with 1:3:6 cement concrete of 0.60 meter dia. of required length around the pole i/c muffing of 0.45meter from ground level as per specification with 20cm.thick base foundation providing and busying 15mm.dia.G.I.pipe from bottom to 1.5meter above ground level on pole, refilling the pit i/c. painting of pole with bitumen paint in bottom and one coat of red oxide and two coat of aluminum paints etc. complete as per specification. The depth of foundation shall be1/6th of the length of pole. (A) 410 SP-29 - 9 meter long.

Supplying and fixing of Angle/ channel/flat iron, V cross Arms reinforcement of RSJ jolt/ flat iron fittings for overhead lines and poles such as cross arms/ bracket/ clamps/ stiffness for poles etc. all required steel work including' cutting to size making proper shapes drilling scan welding etc. including nuts & bolts plan & spring wisher and other necessary material including one coat of red oxide and two coat of aluminum paint etc. as required. Chequre plate/ Tenstion plate atc.

Supplying and fixing Polymer type 11 K.V. pin insulator with G.I. pin of approved make on existing pole or bracket with necessary materials and hardware complete as required.

Supplying and fixing polymer type 11 K.V. disc (strain) insulator of approved make on existing pole or bracket with necessary materials and hardware complete as required.

Providing and fixing earthing arrangement for H.T./L.T. poles with G.I. wire of 115 turn of 50mm dia. connection with bracket/ cross arm/ pole with 4mm dia. G.I. lead through 20 mm dia. G.!. Protection pipe of length from bottom of pole to 2 meter above ground level, packing of charcoal powder and salt as per specification including excavation of pit in all type of soil / rock etc. complete.

DANGER CAUTION PLATES :Providing and fixing enamelled danger caution plate/board on existing electric poles or wherever required of size 250x200 mm, made of 1.6mm thick mild steel sheet and vitreous enamelled white, with latest, figures and the conventional skull and cross-bones in signal red colour (as per IS-5-1978 with latest amendment) on the front side.The rear side of the plate shall also be enamelled. The corner of the plate shall be rounded off with required material such as screws, wires clamps, nut bolts etc. complete 33 KV/11 KV

Supplying and fixing 12x16 gauge barbed wire antidumping device (900 mm and3.5kg wire on pole) around the existing H.T. pole and sub station poles for safety measures as per IE rules including all staples and all other necessary materials complete as per mpseb specification.

Supplying, installing, connecting, testing and commissioning of approved make distribution transformer 5 star rating of accepted standard specification oil filled, core type aluminum wound out door type 11/ 0.4: KV step down with drain and filler . Value with locking arrangement two ear thing terminals, lifting arrangements and first filling of oil, conventional unit, including installation on existing D.P. structure. (B) 200KVA 11 / 0.433 KV (Conventional) BIS LEVEL III 5 Star Rated.

Providing and fixing outdoor type pole mounting weather, dust and vermin proof LT distribution box made of 14 gauge MS sheet with clamping arrangements, lockable hinged door duly painted on all sides with red oxide after antirust and corrosion treatment, two coats of synthetic enamel paints of approved make and shade, consisting of following fittings: For 200 KVA Transformer (a) 315 Amps 35 KA breaking capacity TP MCCB with neutral link for incoming - 1No. (b) 4 strip aluminium bus bar 400Amps supported on epoxy insulators - 1 Set (c) 160/200 Amps, 415Volts DMC cutout with base for outgoing feeder with 160/200 amp HRC - 9 Nos. (d) GI earth terminals- 2 Nos. (e) 6 Lever Godrej Padlock with 3 keys - 1 No. (f) Light point with switch and lamp holder with lamp - 1 No. Distribution box complete as above (a to F) as per MPKVVCL norms & specifications complete.

Commissioning of D P structure over existing support with panting in an approved manner consisting of following (A) D. C. cross arm with clamp, nuts & bolts (100 x 50 mm only ) - 1 set (B) 11 KV D. O. fuse unit, lightings arrangement and AB swich mounting channel with nuts and bolts (75 x 40 mm channel) of require - 1 set (C) 11 KV Polymer AB swich as required - 1 set (D) Transformer mounting cross arms / channels with clamps nuts and bolts (100 x 50 mm channel ) - 1 set (E) 11KV Polymer Do fuse unit ( set of 3 no.) - 1 set (F) Transformer clamping set (50x50x6 mm angle ) with nuts and bolts etc. complete - 1 set (G) Transformer belting set (50x50x6 mm angle) with nuts and bolts etc. complete - 1 set (H) 11 kv polymer lightning arrestor ( 9 kv gapless type ( 5 kA ) for DTR ) ( set of 3 No.) - 1 set (I) supplying , fixing, testing and connecting of complete earling set of 7 No. as per MPMKVVC.Ltd. circular No DS CO M/EZ/ WS/1516/DT 17-03-2008 and approved dwring for transformer sub - station including all materials GI Strips, GI wires, Charcoal power salt excavation of pits in all types of soils/rocks etc. as required complete .( 1 set of 7 Nos.) -1 set (J) Distribution panel mounting channel and clamp with nuts & bolts etc. (75 x 40 mm channel ) 1 – set (K) Supplying , fixing, testing and Commissioning of DTR Meter LT. 3 phase 4 wire 3X240 volts I 3 A. LTCT operated 3 phase 4 wire 3x63, 5 volts , LB = 5 amps lmax 10 amp trivector meter glass of accuracy 0.5s DLMS complaint category a meter along with GSM ( GPRS compactable ) modems with box i/c all accessories and formalities as per MPMKVVCL as required. or 3P 4w - 5A LTCT class 5s DLMS compliant type c. rs - 232. Port box MRI LTCT 100/5A i/c meter box with TTB etc as required. (L) SF & T and HT tape for covering LT bushing i/c windings and blower hitting complete minimum 30 meter or as required. D.P. Structure Complete as above (A to L)

Supplying ,laying ,testing, and commissioning of P V C insulated PVC heavy duty power cable confirming to lS 1554­1964 with upto date ammnandentment,1100 volt grade cable Of approved make in trench ,G I pipe Air (laying on pole) trench, i/c cost of excavation in any type of soil/rock etc. including connection through lugs by cramping method glands etc as required as per specification. (A) Supplying laying testing and commissioning.UnArmoured single core XLPE insulated aluminum conductor cable. (b) 150 sq mm.

(c) 300 sq mm.

(B) Armoured 4 core XLPE insulated aluminum conductor cable. (A) 4 CORE 16 sqmm. (For street light)

(B) 2 CORE 110 sqmm. (For street light)

Supplying and erection of G.I. guarding of required size on existing HT/LT lines as required as per specifications. (A) Carpet/Cradle type 8 SWG (4 mm. dia.)

Supplying and erection of guards for existing overhead lines as required as per specification: 42.11.1 Cradle type

Providing and fixing chain link fencing sourriding existing DTR S/S finical (total 37 running meter maximum) of 6 Feet height with chain ling fencing on MS Angle (50X50X6) mm support 7 nos. 9feet height with following feature. (A) Upper & lower frame of fencing will be of MS angle (25X25X4) mm size. (B) MS strip of (25X5) mm flat shall be used fro cross bracing of fencing (C) SINGLE Gate of MS angle (50X50X6)mm. bracing of 25X5 mm flat with mesh & locking arrangement.Complete as above( A to C) – one job.

Supplying and fixing street light with high power LED of 1 to 3 W each assembled on single MCPCB, system lumens output with efficacy>90 lm/W. luminiare having color temp 6500K & 50000 burning hrs life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF 0.95 & surge protection 3KV. Housing made of pressure die cast aluminium with heat resistant flat glass / Lens type, IP65 protection. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory i/c 50mm.dia G.I. Pipe bracket upto 2 mtr. long in required angle/shape, connection lead, testing etc to complete the job. 2 Yrs Guarantee certificate from manufacturer. (Make Bajaj, Crompton, Havells, Syska, Philips, ) (A)90 watt

Supply and laying rigid PVC single socket and, nonmetallic pipe ISI Marked (IS-4985-2000) 10 Kg/sq.cm class 5 for protection of under ground cable/or for water pump delivery side, for water supply complete with necessary clamp coupler, band, Tee, Elbow etc. in an approved manner including cost of excavation etc. (A) 75.00mm O.D

Supply and laying rigid PVC single socket and, nonmetallic pipe ISI Marked (IS-4985-2000) 10 Kg/sq.cm class 5 for protection of under ground cable/or for water pump delivery side, for water supply complete with necessary clamp coupler, band, Tee, Elbow etc. in an approved manner including cost of excavation etc. (B) 50.00mm O.D

Supplying fixing testing and commissioning of metallic Strret Light Box of required size With MCB,Bus Bar & connecter etc as required.

Supplying & installation of suitable class G.I.(’B’ class) protective pipe including cutting making thred providing sockets bend, elbow, nuts & bolds of approved manner as required to complete the job fixed on wall, poll or laying in ground trench i/c excavation in all type of solid/rock in an approved to manner as required. (A)G.I. Pipe ‘B’ class 40 mm dia.

Supplying & installation of suitable class G.I.(’B’ class) protective pipe including cutting making thred providing sockets bend, elbow, nuts & bolds of approved manner as required to complete the job fixed on wall, poll or laying in ground trench i/c excavation in all type of solid/rock in an approved to manner as required. (B)G.I. Pipe ‘B’ class 32 mm dia.

(1) The contractor is responsible for approval of Transformer Sub Station, H.T./L.T. lines/testing of L.T.C.T. meter from competent authority of Electrical Inspector and energisation/ commissioning of sub-station H.T./L.T. lines and necessary shut down from MPPKVVCL. No extra payment will be done for this job. (2) Quantities/items may increase/decrease as per site conditions. (3) Ready to carryout maintenance work if failure of any equipment i.e. transformer, Line in colony 5%amount of total work done withheld for maintenance work within 5 year period from the date handing over.