GE/CHM-80/2021-2022 REPAIR, PAINTING AND POLISHING OF WOODEN FURNITURE UNDER BSO GE CHANDIMANDIR

Amount

REPAIR TO TABLE DINING 6 & 8 PERS (FD-272) Dismantling / taking out carefully existing broken parts of table dining 6/8 pers and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :- (a) Top of table dining 8 pers made out of 18mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 6mm thick teak wood beading alround

(b) Top of table dining 6 pers made out of 18mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 6mm thick teak wood beading alround

(c) Teak wood legs

(d) Teak wood long rail

(e) Teak wood short rail

(f) Teak wood stiffener

(g) Teak wood bracket (triangular) of size 100mm & 30mm thick

REPAIR TO TABLE CENTRE (FD-274) Dismantling / taking out carefully existing broken parts of table centre and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :- (a) Top of table centre made out of 18mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 6mm thick teak wood beading alround

(b) Teak wood legs

(c) Teak wood long rail

(d) Teak wood short rail

(e) Teak wood stiffener

REPAIR TO TABLE BED SIDE (FD-276) Dismantling / taking out carefully existing broken parts of table bed side and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :- (a) Top of table bed side made out of 18mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 6mm thick teak wood beading alround

(b) Side of table bed side made out of 12mm thick particle board, medium density, flat pressed, single layer type or 03 layer type with BWR type adhesive including 6mm thick teak wood beading alround

(c) Shelf and bottom made out of 12mm thick partcle board, medium density, flat pressed, single layer type or 03 layer type with BWR type adhesive including 6mm thick teak wood beading alround

REPAIR TO TABLE WRITING (FD-275) Dismantling / taking out carefully existing broken parts of table writing and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :- (a) Top of table writing made out of 18mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 6mm thick teak wood beading alround

(b) Side of table writing made out of 18mm thick particle board, medium density, flat pressed, single layer type or 03 layer type with BWR type adhesive made to shape

(c) Teak wood top long rail

(d) Drawer made out of 1st class hard wood (teak wood) with knob brass chromium plated 40mm dia

(e) Teak wood leg

(f) Bottom side stiffener made out of 1st class hard wood teak wood

(g) Rubber shoe of white cream shade at the bottom of leg of size and shape

REPAIR TO PEG TABLE (FD-277/384) Dismantling / taking out carefully existing broken parts of peg table and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :- (a) Top of peg table made out of 18mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 6mm thick teak wood beading alround

(b) Teak wood legs

(c) Teak wood long rail

(d) Teak wood short rail

REPAIR TO TABLE 900X600x760MM WITHOUT DRAWER (FD-284) Dismantling / taking out carefully existing broken parts of table without drawer and supply & fixing fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :- (a) Top of able without drawer made out of 18mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 6mm thick teak wood beading alround

(b) Teak wood leg

(c) Teak wood long rail

(d) Teak wood short rail

(e) Bottom centre stiffener made out of 1st class hard wood teak wood

(f) Bottom side stiffener made out of 1st class hard wood teak wood

(g) Teak wood bracket (triangular) of size 100mm & 30mm thick

REPAIR TO TABLE 900x900x760mm (FD-94m) Dismantling / taking out carefully existing broken parts of table and supply & fixing new parts fixed fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :- (a) Top of table without drawer made out of 18mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 6mm thick teak wood beading alround

(b) Teak wood leg

(c) Teak wood front rail / side rail / rear rail

(d) Teak wood stiffener

TEAPOY WOODEN (FD-278) Dismantling / taking out carefully existing broken parts of Teapoy wooden and supply & fixing new parts fixed fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :- (a) Top of teapoy wooden made out of 18mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 6mm thick teak wood beading alround

(b) Teak wood leg

(c) Teak wood front rail / rear rail

(d) Teak wood side rail

(e) Teak wood stiffener

REPAIR TO SIDE BOARD (FD-241) Dismantling / taking out carefully existing broken parts of Side board and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :- (a) Top made out of 18mm thick prelaminated particle board , one side laminated & other side white balancing exterior grade with 6mm thick teak wood beading alround

(b) Bottom made out of 18mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 6mm thick teak wood beading alround

(c) Side made out of 18mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 6mm thick teak wood beading alround

(d) Shelf made out of 12mm thick partcle board, medium density, flat pressed, single layer type or 03 layer type with BWR type adhesive including 6mm thick teak wood beading alround

(e) Partition made out of 18mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 6mm thick teak wood beading alround

(f) Back made out of 6mm thick commercial ply BWR type, made to shape, duly polished

(g) Bottom long stiffener made out of 1st class hard wood teak wood

(h) Bottom short stiffener made out of 1st class hard wood teak wood

(j) Teak wood leg

(k) Brass chromium plated knobs 25mm dia

(l) Brass six lever lock with duplicate key of approved best quality

(m) Piano type hinges mild steel, bright finish, width of flap 30mm

CHAIR EASY (FD-229) Dismantling / taking out carefully existing broken parts of chair easy and supply & fixing new parts fixed in replacement made out of Ist class hard wood (teak wood) all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :- (a) Leg of chair easy (Rear / front)

(b) Side rail

(c) Rear rail of seat

(d) Front rail of seat

(f) Side rail of back

CHAIR WRITING (FD-250/1107) Dismantling / taking out carefully existing broken parts of chair writing and supply & fixing new parts fixed in replacement in position made out of Ist class hard wood (teak wood) all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :- (a) Rear leg

(b) Front leg

(c) Front rail

(d) Rear rail

(e) Side rail

(f) Arm rest

(g) Stiffener

(h) Back rest

CHAIR DINING (FD-279/1105) Dismantling / taking out carefully existing broken parts of chair dining and supply & fixing new parts fixed in replacement in position made out of Ist class hard wood (teak wood) all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :- (a) Rear rail

(b) Front rail

(c) Rear leg

(d) Front leg

(e) Side rail

(f) Stiffener

(g) Back rest

Bin Multipurpose (FD-E6/MAP/09) Dismantling / taking out carefully existing broken parts of Bin Multiporpose and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :- (a) Top made out of 18mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 6mm thick teak wood beading alround

(b) Bottom made out of 18mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 6mm thick teak wood beading alround, duly polished,

(c) Side made out of 18mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 6mm thick teak wood beading alround

(d) Shelf made out of 12mm thick partcle board, medium density, flat pressed, single layer type or 03 layer type with BWR type adhesive including 6mm thick teak wood beading alround

(e) Partition made out of 18mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 6mm thick teak wood beading alround

(f) Back ply made out of 6mm thick commercial ply BWR type, made to shape

(j) Teak wood frame Base

(l) Magnet catcher

(m) Piano type hinges mild steel, bright finish, width of flap 30mm

(n) Handle 75mm (MS powder coated)

Table bed side Map (FD-E6/MAP/15) Dismantling / taking out carefully existing broken parts of Table bed side Map and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :- (a) Top made out of 18mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 5 mm thick teak wood beading alround

(b) Bottom made out of 18mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 5 mm thick teak wood beading alrounded

(c) Side made out of 18mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 6mm thick teak wood beading alround

(d) Shelf made out of 12mm thick partcle board, medium density, flat pressed, single layer type or 03 layer type with BWR type adhesive Mincluding 6mm thick teak wood beading alround

(e) Drawer made out of 12mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 5mm thick teak wood beading alround

(f) Back made out of 6mm thick commercial ply BWR type, made to shape, duly polished

(g) Handle 75mm (MS powder coated)

REPAIR TO TABLE DINING 1200mmx900mmx760mm Four PERS (FD-273 ) Dismantling / taking out carefully existing broken parts of table dining and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :- (a) Table top made out of 18mm thick prelaminated particle board, one side laminated & other side white balancing exterior grade with 6mm thick teak wood beading alround

(b) Teak wood leg

(c) Teak wood long rail

(d) Teak wood short rail

(e) Teak wood stiffener

(f) Teak wood bracket (triangular) of size 100mm & 30mm thick

CHAIR DINING WITH CUSHION (FD-E6/MAP/10) Dismantling / taking out carefully existing broken parts of table dining and supply & fixing new partsfixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :- (a) Cushion cover made out of good quality long cloth tapestry cloth rate not less than Rs. 360/- per mtr and as per sample approved by GE

(b) Cushion made of 75 mm thickness (32density) duly covered with tapestry cloth of worth not less than Rs. 360/- per meter of approved quality and shade including fixing it properly by nailing all the corners.

(c) Perforated seat made of 10,mm ply wood commercial BWR type,

(d) Teak wood Rear rail

(e) Teak wood Front rail

(f) Teak wood Rear leg

(g) Teak wood Front leg

(h Teak wood Side rail

(j) Teak wood Stiffener

(k) Teak woodBack rest

Material and labour for preparation of old polished wooden furniture articles with sand paper and polishing with two coats of french polish as follows:- (a) Chair easy

(b) Chair dining

(c) Chair writing

(d) Hat Stand

(e) Side board

(f) Stool dressing

(g) Sofa sets to seat five persons

(h) Sofa sets to seat four persons

(j) Table centre

(k) Table dining for 6/8 person

(l) Table writing

(m) Table dressing ladies

(n) Table dressing gents

(o) Teapoy wooden

(p) Table bed side

(q) Table peg

(r) Bed ply wood

(s) Table dining 04 Pers

(t) Book case wooden

(u) Chair dinning long with cushion ‘MAP’

(v) Bin multipurpose ‘MAP’

(w) Table 1520x860x760mm

(x) Chair wooden bottom

(y) Chair dining with cushion

(z) Stool dressing with cushion

(aa) Bin Soiled Linen

CHAIR WOODEN BOTTOM (FD-285) Dismantling / taking out carefully existing broken parts of chair bottom and supply & fixing new parts fixed in replacement in position made out of Ist class hard wood (teak wood) all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :- (a) Rear leg

(b) Front leg

(c) Front rail

(d) Rear rail

(e) Side rail

(f) Stiffener

(g) Seat made of 6mm ply wood commercial BWR type

J.D.Builders

M/s R.K.Jain

singh traders

RG Builders

B S FURNITURE