GE(S)/M-58/2022-23

Amount

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

Taking down existing cement plaster at any height on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Dismantling fencing wire mesh of any type complete all as specified and directed.

Dismantling stone slabs and tiles, paver block or chequered tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

Dismantling RCC posts or struts any section, including taking out embedded portion and making good disturbed surfaces of ground including removing rubbish off the premises complete all as specified and directed.

M&L for Providing precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) as in manhole cover slabs and similar articles placed in position and set in CM (1:4) all as specified.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F MS Round bars 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & securing with clips for holding chain link fencing, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in surface channel and drains complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L brick work with flyash bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) complete all as specified and directed.

All as per srl item No 13.00 above but (EXCEPT BRICKS) complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on other than fair faces of brick work or concrete surfaces in patches finished even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in sub base finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and directed.

M&L for precast designer coloured chequered cement concrete tiles with glossy finish (factory made rectified) of size 300mmx300mmx10mm, top layer glazed made in any type of cement and pigment, in required patterns in floor etc set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and directed.

M&L for 60mm thick, M-35 Grade coloured machine pressed precast rubber moulded concrete interlocking (red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 , laid dry over and including 50 mm thick screened river washed sand cushion, and dismantling existing interlocking paver block of any shape and size complete all as specified and directed.

All as per item No.19 here in before but except paver blocks complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching etc slightly rounded or chamferred angles and throating, complete all as specified and directed.

S&F in repair of Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

S&F for mild steel fencing posts/struts including embeding in concrete and screwing etc. including securing bolts; including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only 4mm dia chain link MS galvanisd medium coated as per IS 4826 fencing 75mmx75mm mesh and 3mm dia of wire, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type and standards, rails, straining bolts etc, including provision of binding wire, complete all as specified and directed.

M&L for mild steel screw bolts 5mm to 10mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

M&L for preparation of newly untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of newly plastered surface of external wall and applying two coats of cement base paint over a coat of alkali resistant primer including curing, complete all as specified and directed.

M&L for preparation of old plastered surface and applying one coats of cement base paint including curing, complete all as specified and directed.

kewal builders

M/S NARESH KUMAR SHARMA

Bidder Name

surjit enterprises

kewal builders

M/S NARESH KUMAR SHARMA