WBPWD/EE/KNHED/e-NIQ-64/24-25

Amount

S&F 415 V, Horizontal type, TPN MCB DB (4-way) with SS enclosure double-door with IP-42/43 protection, with Four Pole Isolators as incomer and SPMCBs ('C' Curve, 10 KA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment as per GS. INCOMING-63 A FP Isolator -1 No. OUTGOING-6-32A SPMCB-12 Nos. [Make - Legrand/Siemens/Schneider/ABB]

S&F 250V, SPN MCBDB (2+12) way with SS enclosure double-door (Ivory White with IP-42/43 protection with DP Isolators as incomer and SPMCBs ('C' Curve, 10kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment as per GS. INCOMING-40 A DP Isolator OUTGOING-12 Nos. 6-10A SPMCB [Make - Legrand/Siemens/Schneider/ABB]

Supply & delivery of 4C 16 Sq mm AL, XLPE Armoured cable (Brand Approved by EIC)

Laying of 4C 16 Sq mm AL, XLPE Armoured cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting, as per GS

S&F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 4C 16 Sq mm AL, XLPE Armoured cable, as per GS.

Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection, as per GS.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required as per GS. [Make-Finolex/KEI/Havells/Polycab] 2x6sqmm + 1x4sqmm [HTPNDB to SPNDB]

Do - Do - Do - 2x4sqmm + 1x2.5sqmm [for AC]

Do - Do - Do - 2x2.5sqmm + 1x1.5sqmm [Power plug, Comp. board]

Do - Do - Do - 3x1.5sqmm

Finising the end of above PVC insulated & unsheathed copper wire as per GS. 2x6sqmm + 1x4sqmm

Do - Do - Do - 2x4sqmm + 1x2.5sqmm

Do - Do - Do - 2x2.5sqmm + 1x1.5sqmm

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish, as per GS. [Average run 9 mtr]

Do - do - do - [Average run 8 mtr]

Do - Do - Do - with to 240 V 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish, as per GS. (On board )

Do - Do - Do - [Average run 4.5 mtr]

S&F Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc., as per GS.

Supply & Fixing 240 V, 20A, plug socket with separate 20A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required, as per GS.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), incl. S&F 1no 240 V, 25A, 3 pin Modular type plug top (Brand approved by EIC) and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire as per GS.

S/F 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. as per GS.

Supply & delivery of Double LED tube light fittings. (Make :- Philips -TMC 502 2xT-LED 22W). incl S&F 2x 18/20 watts 4 ft LED tube lamp (Make:- Philips, Cat - Essential LEDTube 1200mm 20W865 T8 IND I)

Supply & delivery of Single LED tube light fittings. (Make :- Philips -TMC 502 1xT-LED 22W). incl S&F 1x 18/20 watts 4 ft LED tube lamp (Make:- Philips, Cat - Essential LEDTube 1200mm 20W865 T8 IND I)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length, as per GS.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length., as per GS.

Supplying & Fixing MS fan clamp of two piece type for RC ceiling as per approved specification, fabricated from 40x9 mm MS flat including making good damages to building roof with satisfactory finishing and painting, as per GS

Supply & Fixing 1200mm celling Fan incl safety steel wire of minimum 18 SWG with its accessories with necessary interconnection as per EIC(Make : Crompton- Rivera 1Star/Usha Striker Plus 1star)

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire, as per GS.

Supply and fixing of 240V, 9" ,1370 rpm AC exhaust fan(EPC Make) after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of given diameter. (Make-- USHA/Crompton/EPC)

S&F angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling, incl. S&F of 9W LED lamp, as directed by EIC.

S&F earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as reqd., as per GS.

Connecting the equipments to earth busbar including S&F 2x8SWG GI (Hot Dip) wire on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as reqd. & mending good damages as per GS.

S&F 1-phase AC Timer with temperature Controller (Manual Start & Auto Stop suitable for 1.5/2 TR 1-phase double AC Operation) in MS Enclosure duly phosphatised powder coated with din rail with IP-43 protection embeded in wall with following electrical accessories & front door locking arrangement with all necessary wiring and making connection as directed by EIC. a) 25A DPMCB (10kA, C curve) - 1 no, MCB housing should be thermostat materials (fire retardant). b) 22A 3 Pole Power Contactor - 2 no,

c) Daily & weekly programmable basis digital time switch, 6 yrs. Battery backup, settable DST & key pad lock features. d) MS Enclosure of suitable size, duly Powder coated Paint & inbuilt locking facility - 1No. e) Temp. Controller, with Sensor incl. 2 mtr wire - 1Set f) Auxiliary Relay - 1 No. g) Start/Stop Push Button - 1 Set h) ON/OFF LED Panel Lamp - 2 Set i) 2 way Bypass Toggle Switch - 1 No. [Make - L-K / ABB / Crabtree]

(Rate should be quotated including all taxes and duties and GST)

Messrs HI- Q - ENTERPRISE (BID ID -5626912)

BANERJEE CONSTRUCTION AND CO (BID ID -5602410)