Providing and laying of high density polyethylene HDPE Pipeline including all allied works with material as per DNIT from Sewerage treatment Plant Gidderbaha district Sri Muktsar Sahib for Supply of Treated Water for Irrigation

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

Tender No: DSWC/MKS/2026-27/04

Name of the Firm/Bidder

Address of Firm/Bidder

Mobile No of Firm/Bidder Email ID of Firm

Name of work: PROVIDING AND LAYING OF HIGH-DENSITY POLYETHYLENE (HDPE) PIPELINE (DIAMETER 200 MM & 280 MM, PE-80, 4 Kg/cm2 WORKING PRESSURE AS PER 4984-2016 STANDARDS); INCLUDING ALL ALLIED WORKS WITH MATERIAL AS PER DNIT FROM SEWERAGE TREATMENT PLANT,GIDDERBAHA , DISTRICT: SRI MUKTSAR SAHIB FOR SUPPLY OF TREATED WATER FOR IRRIGATION.

Total Estimated Amount of Works Rs. One crore Seventy six lakh Seventy One Thousand Seventy Two only

Quoted by Contractor {- or + to estimated amount, in figure upto 2 dcimal point only} Quote (-/+)

Note: Please quote only figure (upto 2 decimal points) in above blue colour box in minus or plus. Do not put %age sign after this figure. Please check Quoted Rate in Next cell.

Note: Please refer to DNIT for item wise rate and details.

Name of Work :- PROVIDING AND LAYING OF HIGH-DENSITY POLYETHYLENE (HDPE) PIPELINE (DIAMETER 315 mm & 250 mm, PE-80, 4 Kg/cm2 WORKING PRESSURE AS PER 4984-2016 STANDARDS); INCLUDING ALL ALLIED WORKS WITH MATERIAL AS PER DNIT FROM SEWERAGE TREATMENT PLANT, GIDDERBAHA, DISTRICT: SRI MUKTSAR SAHIB FOR SUPPLY OF TREATED WATER FOR IRRIGATION.

Item of Work Quantity Unit Rate in (Rupees) Total in Rupees

Excavation of Trenches (with backfilling) and providing ,laying& jointing of HDPE pipeline (Dia - 280 mm o/d of 4Kg/cm2 = 200 Mtr & Dia - 200 mm o/d of 4Kg/cm2 =7424 Mtr) complete in all respects One Crore Thirty Nine Lakh Seventy Nine thousand Six Hundred forty seven only

Civil Works for Construction of Pump Room (6m×4m) for Motors Seven Lakh Forty two Thousand Eighty four only

Providing and fixing of Pumping System complete Twenty two Lakhs seventeen Thousand five hundred twenty two Only

Electric Fittings for pump house and pumps Six Lakh Twenty Six Thousand Eight Hundred ninteen Only

Digital Water Meter 100000 One lakh only 100000

Sign boards 5000 Five thousand

Grand Total One crore Seventy six lakh Seventy One Thousand Seventy Two only

Only one of the options is to be filled. More than one option shall be rejected.

Rate filled in any form shall be considered only in %age

Rate shall be filled both in figures and in words, otherwise tender shall be rejected

Rate filled at any other place in the document shall not be considered.

No condition shall be accepted.

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

PROJECT NAME : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT 7 MLD, STP GIDDERBAHA, SHRI MUKTSAR SAHIB

PIPELINE SYSTEM

S.No. Description of items Unit Qty Revised Rate Amount (INR)

Sr. No. Description Unit Qty Total Rate Amount (Rs.)

1 Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

(Earth work upto 1.5 m. Depth for All classes of soil except rocky) Cum 7475.26 93.78

2 Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI - 4984- 1995 casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Including Riser Pipe)

HDPE Pipes 280 mm o/d Pipe of 4.0 kg/cm2 PE-80 Mtr. 3889 2261.15

HDPE Pipes 200 mm o/d Pipe of 4.0 kg/cm2 PE-80 Mtr. 3535 1137.72

3 Supplying, fixing and jointing H.D.P.E pipe's specials complete as desired by Engineer-in-Charge.

For 280mm pipe lines laid outside habitation & in the open area/ field 2% Extra will be taken for the respective i/d of pipe.) 2% of 28.15( F )(a) Mtr. 3880 45.22

For 200mm pipe lines laid outside habitation & in the open area/ field 2% Extra will be taken for the respective i/d of pipe.) 2% of 28.15( F )(a) Mtr. 3505 22.76

4 Supply & installation of Alfa-valve HDPE (C.I)

280 mm Dia (Market Rate/ Approved by Department) Each 6 1940

200 mm Dia (Market Rate/ Approved by Department) Each 20 1034

5 Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete.

C.I Single air valve (Size 80mm)(For 280 mm =9 nos) Each 9 4507.11

C.I Single air valve (Size 80mm)(For 200 mm =4 nos) Each 4 4507.11

6 Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.

Supply & Jointing of 80 mm. Dia. G.I. Pipe(Total Nos.-13 with 3mts for each ARV ) Mtr. 39 1152.36

7 Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge) Class PN-1 as per ISI

200 mm i/d Sluice Valves flanged Nos. 3 15241.75

8 Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra.

150 mm i/d Non-return valve Class PN-1.0 as per ISI with gun metal flap Nos. 3 8785.84

Grand Total in (Rs.) including Taxes

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

PROJECT NAME : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT 7 MLD, STP GIDDERBAHA, SHRI MUKTSAR SAHIB

Construction of Pump House (6m X 4m)

S.No. Description of items Unit Qty Revised Rate Amount (INR)

1 Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. Cum 32.03 191.74

2 Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type Cum 5.97 4716.06

3 Earth filling under floors with surplus soil containing more than 40% taking outside the premises in 15 cm layers including ramming watering and consolidated lead upto 1000 m Cum 4.8 344.49 1653.57

4 Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. Cum 10.84 6490.4

5 Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. Cum 13.49 7280.52

0.9 Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded Sqm 3.88 348.71

6 Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete Qtl 22.8 7919.61

7 Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering). Sqm 36.18 221.24

8 Centering and shuttering for columns (Square or rectangular or poly gonal in plain) Sqm 49.36 502.52

9 Centering and shuttering for sides and soffits of beams, launching girders, bressumers, lintels. Sqm 30.84 400.33

10 Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. Sqm 39.45 560.46 198.26

11 First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. Cum 14.5 6145.42

12 Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing Sqm 33.81 743.77

13 12.5 mm thick cement plaster 1:5 Sqm 181.5 200.43

14 12.5 mm thick cement plaster 1:4 Sqm 33.81 208.86

15 Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish Sqm 215.31 84.28

16 Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface Sqm 215.31

17 Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm Sqm 215.31

18 Conglomerate floor 50mm thick cement concrete rete 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material Sqm 24

19 Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material Sqm 10.63 424.56

20 Floating coat of 1:5mm thick neat cement laid in one operation to the topping Sqm 24

21 Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge Mtr 8.3

22 Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge

UPVC 110 mm bend Nos 4 142.22

23 Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 Each 2 100.08

24 Khurra on roof as per item No. 13.43 with C.I. Spouts 100 mm dia fixed in position. Each 2 133.79

25 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt.( Also not to used over footoaths). Sqm 10.63

26 Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect. (a)For single rebate. Kg 26.25 93.76

27 Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with Sqm 2.52 4108.65

28 Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitered and electrically flashwelded, with iron fittings including necessary iron handles, hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire gauge) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire gauge and grill will be paid as per respective items) Kg 140 134.85

29 Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. (b) Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area Sqm 8.82 629.99

30 Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects. Sqm 8.82 954.47

31 Applying priming coat with metal primer on new steel or iron work including preparation of surface. Sqm 2.52 25.28

32 Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade Sqm 2.52 69.53

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

PROJECT NAME : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT 7 MLD, STP GIDDERBAHA, SHRI MUKTSAR SAHIB

SUB DIVISION : GIDDERBAHA DIVISION : SHRI MUKTSAR SAHIB

ESTIMATE FOR COST OF PUMPING SYSTEM INSTALLATION

S.No. Description of items Unit Qty Total Rate Amount (INR)

A Pumping set estimated cost :-

1 Providing, fitting & commesioning of ISI Mark Submersible Non-clog pumpset with Panel Board, Fuse Box, Cable for connection from Pump to Panel within the pump Room for 7 MLD discharge and 35 Meter Head and Flow 40.5 LPS (as calculated in head loss sheet) (Non- Schduled Item, cost considered as per market rate) (excluding the cost of Panel Board, Fuse Box, Cable )self propeller motor Set 3 482924

2 Control panel with MS steel sheet fabricated, dust & vermin proof wall mounted, rubber cord lining to prevent dust & moisture, dully painted with required holes for cables incoming and outgoing of suitable capacity with starter, Cables 35mm, (K.I.) Amp. meter, volt. meter for running of Motor pumpset Set 3 91227

3 Providing, cutting, Jointing and testing of C.I. Double Flanged pipes with casted flanged as per IS:7181, Class-B (ISI marked with the prior approval of Engineer-in- Charge),including cost of nut bolts and rubber insertion complete including all cartage..150 mm i/d (Total 15mts for each pumpset i.e. total of 45 mts for 3 pumpset) for suction pipe from sump to pumping units & for delivery pipe manifold connecting all pumping units to HDPE pipe main line mtr 45 3299.03

4 Extra for fixing of double flanged pipes in vertical position for over head reservoir & stand pipes, scaffolding, derricks, Jim poles, tools and plants, ropes, guys, etc. Complete as desired by Engineer-in-Charge.150mm i/d pipe lines laid complete (for suction pipes) mts 60 187.53

Supplying and laying C.I. specials suction pipe from sump to pumping units as per IS:1538 complete as desired by Engineer-in-Charge conforming to ISI specifications.. C.I. specials upto 300mm i/d .

a Bend on suction pipes (150mm i/d weighing 45 kg each) Total weight for Three (3) pumpsets 45x6=270 kg kg 270 82.16

b Flange (150 mm i/d weighing 26 Kg each) Total weight for Three (3) Pumpsets 26*10*3=780 Kg Kg 780 82.16

c Tee (150*150 mm Weighing 47 Kg Each) Total Weight 3 Tees=47*3=141 Kg kg 141 82.16

d Blank Flange (150 mm i/d weighing 11 Kg each) Total weight for Three (3) Pumpsets 11*6=66 Kg kg 66 82.16

e One taper (150mmx200 mm weighing 51 kg each) 3*51=153 Kg kg 153 82.16

6 Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge).(A)Class PN-1 as per ISI (C) 150mm i/d Sluice Valves flanged

Total for Three (3) pumpsets 1*3= 3 Nos Each 3 8914.18

7 Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete. (e)C.I Single air valve screwed (Size 80mm)

Total for Three (3) pumpsets 1*3= 3 Nos Each 3 4507.12

8 Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra.(B) Class PN-1.0 as per ISI with gun metal flap ( d)150mm i/d Non-return valve

Total for Three (3) pumpsets 1*3= 3 Nos Each 3 9197.42

9 Jointing of C.I. Pipes as per IS:1536, Valves and specials with lead caulked joints ,including cost of lead , yarn and cost of labour fuel and tools etc with testing complete. For 150mm i/d pipe lines

Total for Three (3) pumpsets 1*3= 3 Nos Each 48 1116.21

10 Cutting of C.I. Pipes , specials and chipping or filing the surface to a uniform finish. ( C )250mm i/d pipe lines

Total for Three (3) pumpsets 1*3= 48 Nos Each 48 71.25

11 Providing and fixing of Pressure switch of approved make in MS pipe line suitable for line presure up 15kg/cm2 & including connection with main panel etc. as required complete in all restect

Total for Three (3) pumpsets 1*3= 3 Nos Each 3 3799.26

12 Providing and fixing in position Cast Iron Foot valves flanged ends with rubber sheat as per IS 4038 including cost of Nut Bolt , rubber insertion complete in all respect 150 mm i/d Cast Iron Foot valves nos 3 6530.52

13 Providing and fixing S.S Pressure Gauge complete as required complete in all respect. ( a ) Dial diameter 150mm calibration 0-16 Kg nos 3 1082.59

14 Supplying, Laying, Testing and Commissioning of ISI marked BUTTERFLY VALVE PN 1.6, with Gun metal seal duly ISI marked complete with rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete as per specifications. 250 mm i/d nos 5 5456.25

15 Providing & fixing Fire Hydrants with jointing including all carriages complete. (without Fire Hydrant surface box) Size 80mm complete in all respect. (a)C.I Fire Hydrants 1S-908 nos 3 7133.17

16 Structural steel work in compound girders or Stanchions built up from two or more R.S. joists or channel section or plates & angles etc. including cutting and fixing all lattice bars, stiffeners, gusset plates, bolts, nuts, rivets, welding rod, etc. complete with flange plates, heads, sole plates, angle connections, etc. with hoisting and erecting in position

For Suction Pipe Instaling and dismantling 3 Pumps Qtl 1.25 9394.28

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

PROJECT NAME : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT 7 MLD, STP GIDDERBAHA, SHRI MUKTSAR SAHIB

Electrical Estimate for Pump room

S. No Description of items Unit QTY. Revised Rate Amount (INR)

1 RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring fan point (Without fan box) Each 2 1091.69

Wiring fan point (With fan box) Each 2 1210.21

Wiring light point Each 10

Wiring 6Amp. wall socket point Each 2 618.93

Wiring 16/20Amp. power plug control poin Each 1 478.03

2 PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

Overall size 2.5sq.mm (Un-sheathed) Meter 100 45.51

Overall size 4sq.mm (Un-sheathed) Meter 100 65.73

3 PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring urposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-

Heavy Gauge PVC Conduit Pipe 25mm dia.(Flushed) Meter 50

4 G.I. EARTHING: Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling).

Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 8Metre in length) Each 3 3315.89

5 XLPE INSULATED ARMOURED CABLES (LOOSE):-Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- Meter

Overall size 95sq.mm (4Core) Armoured (Loose) Meter 200 840.21

Overall size 16sq.mm (4Core) Armoured (Loose) Meter 50 246.2

6 MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

MCB Single Pole 6-32amp. (10kA, Curve-C) Each 6 211.75

MCB Single Pole 40amp. (10kA, Curve-C) Each 1 439.3

7 RCCB's:Supply and erection of RCCB (Residual Current Circuit Breaker) for Earth leakage protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61008-1 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs

RCCB Double Pole 16/25amp., Sensitivity 30mA Each 1 1948.13

8 SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:

Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439- 1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-

SP&N Double Door Distribution Board 8 way each 1 1416.27

9 CABLE TRAY: Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-

Cable Tray Size 150mm x 50mm x 50mm (2mm thick) Meter 50

10 Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1/2mtr. below ground level including excavation placing the pipe in position and back filling ith excavated soil etc. of the required size:- Double Walled Corrugated HDPE Pipe 120/103.5mm (Outer/ Inner dia.) Meter 200

LT PANEL: Design, supply, erection& commissioning of following distribution panels made of 2 mm thick CRCA steel sheets, Floor mounted, fully enclosed, compartmentalized, dust & vermin proof with hinged & lockable doors, & complete with earthing, painting as required and mounted with the following : MCC-Panel for 3nos 40 HP pump NO. 1 274058

11 Supply and installation of Hevay Duty Exhaust fan 450 mm with 1400 rpm. Approved MakeCrompton, Havells, Bajaj or equivalent. Each 2 4855

12 Supply and installation of Led Tube light 20-22 watt with make of Phillips, Bajaj and Wipro. Item to include all amterial and lobour complete as per Specification and entire satisfaction of Engineer In Charge. Each 5 450

13 Supply and installation of ceiling fan 1200 mm with Double ball bearing. Approved MakeCrompton, Havells, Bajaj or equivalent. Each 2 2674

TOTAL ELECTRICAL AMOUNT