procurement of physiotherapy materials for CRC Rajnandgaon

Supply of Materials for Physiotherapy Unit

UNWEIGHING SYSTEM (MOBILITY TRAINER) • Can Lift Patient Weight Upto 200 Kg with Remote • Control and noiseless motor. • Digital Display of Patient Weight During Treatment. • Can Lift Patient from Wheel Chair to Attain Maximum Height with remote control. • It reduces supporting weight of lower limb and waist. • Castors • Fully Chrome Adjustable Handrails • Harness 360 Degree free Rotation (Without Treadmill)

Parallel Bar electric ( platform mounted hi lo) • Hi-Lo parallel bars • -Height and width adjustable; • -Hand rails and uprights are made of painted iron tubing. • -Mounted on long wooden platform with inclination on both the sides and covered with non-slip matting

Hi-Lo Bobath table (This electrical bobath table is designed for the rehabilitation of patients diagnosed with various neurological conditions) • Height adjustable via remote control International standards

Standing Frame (standing position with tray) • Basic standing frame (standing position with tray); • Frame is of best quality teak wood with a laminated top tray. Three straps for heel, ankle and pelvic support. Natural wood polish Finish

Tilt table (Motorised) • three straps to hold the patient • Heavy duty motor • Range of tilt from 0-85 degree • Table top is 61 cms wide x 198 cms long x 80 cms high • heavy duty tubular steel with locking castors for easy mobility

Therapy Mattress • 6ft x3ft (Length 6 ft and breadth 3ft • made up of Rubberized foam • vinyl coated cover thickness 4 cm, can be wiped clean with a damp cloth

Parallel Bar with mirror • Hand Rails made of PVC sheathed iron tubing. • Mounted on a 3-meter-long wooden platform with inclination on both ends & covered with non-slip matting. • Height & width adjustable. with detachable polished wooden abduction board

Bolster • 2ft long, diameter- 8 inch 2ft long, diameter- 10-inch Sponge cover on wooden shaft, outer side is covered with Rexene, Rexene is fixed to the wooden shaft with thick pins

Small roll 13-inch-long, Diameter-3 inch with sponge roll covered with Rexene

Prone Wedge Big- Height-14 inch; Length- 31 inch, Breadth- 17 inches Small- Height-10 inch; Length- 26 inch

Wooden Benches with cushion and Rexene cover (3ft long and 4, 6, and 8 inches height)

Looking mirror fixed all around the wall adjacent to the floor at a height of 4 feet and 3 inches above the ground

Six Station Multi Gym Apparatus • GI Material • 6mm Cable • 7.5 ft height • 12 ft length 12 ft width

Training Stairs With Side Guards, Child Size • Steps and Platform Made of the commercial board of 12mm thickness are covered with non-slip matting. • Sides and supporting frame of steps is made of Tubular Pipe (25mm square) with reinforcement. • Side-Guards: Wooden side guards with multi-colour finish. • Hand Rails: Inside Width of Hand-rails 60 cm.: Hand-Rails are made of P.V.C. sheathed iron tubing of 30mm Dia.: Height adjusting Arms are made of Chrome-Plated. : Outer uprights are of square steel tubing. : Height of Handrails are adjustable from 60cm to 82cm to accommodate Children.. • Steps arrangement, Side-1: Four, 15cm high steps on one side leading to a platform of 60cm x 60cm. • Steps arrangement, Side-2: Six, 10cm high steps on the other side. • Steps: Steps are 60cm wide & 22cm deep & covered with non-slip matting. Finish: Working Parts are Chrome-Plated and Uprights & Base with powder coated finish.

Training Curbs And Ramp • Ply-board with Hardwood constructed training set consists of ONE Ramp and THREE Nested Curbs stored below the Ramp. • Ramp: Measures 212cm x 110cm. & Tapers in height from 20mm to 200mm. • Curbs: Three. Measures (1). 100 x 100 x 15cm high. (2). 90 x 90 x 10cm high. (3). 80 x 80 x 5cm high. Finish; Natural wood finish with anti-slip safety mats on ramp and curbs

Nesting Climbing Stool • Constructed of strong Ply-wood board, Top with Non-slip matting. • Sizes are: (1). 16" x 20" x 8" High. (2). 14" x 18" x 6" High. (3). 12" x 14" x 4" High. (4). 10" x 12" x 2" High. Finish: Natural wood polish finish.

Quadriceps Exercise Table with Backrest • Torque Units: ONE set, (for Left OR Right Leg). Resistance Arms is calibrated so that resistance can be varied from Minimum, 1/2, 3/4 & Maximum without adding weights, the unit consists two lever arms, one of which hold the Weights while the other arm with shin foam roller provides contact with the patient''s leg. • Goniometry: A degree scale on the torque unit to measure and record the range of motion from either Direction. • Seat & Armrests: Fixed height, Foam padded Seat is fitted with adjustable Arm-rests. • Backrest: Foam padded back vertically to horizontally for more exercise options. • Stabilizing Straps: with torso & thigh straps for patient safety. • Resistance: By changing angle between the two arms, maximum or minimum resistance can be given without adding Weight. • Weight Plates: 2 of 0.5kg each, & 5 of 1kg each. Total weight 06 kgs. • Size: 70cm x 80cm x 135cm high. Finish: Frame, with Powder coated finished,Torque Unit & working parts with Chrome plated finish.

Exercise Bike with Adjustable Seat, Magnetic Resistance, Pulse Monitor and LCD Display

Rowing Machine Indoor Rower Exercise Machine with 12 Gear Adjustable Resistance | Digital Monitor

Hubbard Hydrotherapy Tank Tank Length 106" (2,690 mm) Tank Width 77" (1,955 mm) Tank Depth 22" (560 mm) Tank Height 34" (865 mm) Tank Capacity 1,609 liters Shipping Weight 1,400 lbs (635 kg) Full body Immersion Tank With adjustable Headrest Turbine Voltage 220V

Therapy Ball stand Wall Mounted

Weighing Machine Digital with capacity up to 200 Kgs

Weighted cuffs (pair) 1kg, 2 kg, 3kg, 4 kg 5 kg

Goniometer Steel (180 and 360 Degrees)

Knee Hammer Steel made with Sensory testing Brush

Inch Tape Standard

Digital BP Meter Battery Powered; Corded Electric with high accuracy

Stethoscope Machined stainless steel chest piece Dimensions: 29L x 16W cms Diaphragm Diameter 4.5 cm (1.75 Inch approx) & Bell Diameter 3.2 cm (1.25 Inch approx.) Spare diaphragm & soft ear tips

LASER (Pain relief equipment) Laser output: Red 655nm40Mw+IR808 nm 200mW Total out put: 240mW Input: 180~240VAC Infrared probe: 808nm200mW Pulse frequency: 0-5000Hz Treat ment Programmed indications: 0-99min 61-70 Accessorie: Protective goggles -2 Meridian point detection kit Infrared red probe

HOSCO PRIVATE LIMITED

ISHA SURGICAL

HOSCO PRIVATE LIMITED

ISHA SURGICAL