WBIW/EE/MED/e-NIT-4/25-26 sl 01

Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar

(c) 15 mm thick plaster

(b) 20 mm thick plaster

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary: (a) on Timber or platered surface: With super gloss (hi-gloss) (iv) Two coats (with any shade except white)

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per Mnufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rates includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (two coat) b) Premium 100% Acrylic Emulsion. Two Coats

Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc. and stacking the material at site as directed. (Payment to be made on measurement of portion of roof or wall removed.)

Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work) (GCI sheet to be supplied by contractor.

(i) In Roof:- a) With 0.60 mm thick sheet

(ii) In wall:- a) With 0.60 mm thick sheet

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes including cost and carriage of all materials complete. (i) Pakur Variety.

Red oxide wash of approved shade including cleaning and smoothening surface thoroughly (without specific permission from the Engineer-in-charge this item of work must not be done on an old painted surface which has not received such red oxide wash before) : External surface (Ground floor) (b) Two coats (on new works only).

Please Enable Macros to View BoQ information