Refurbishment of properties at Dr. Rajendra Prasad MDTC KVIC Patna, Dist Patna of Bihar under Ministry of Micro, Small Medium Enterprises, Govt. of

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in

11.41 all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with

grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching

pigments etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,

8.31 black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm sqm 256 1267.95 ₹ 324,595.20

thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg

per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the

manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory,

11.37 Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing sqm 128 1096.55 ₹ 140,358.40

with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching

pigment etc., complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations

of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar

1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss

finish etc. complete at all levels

8.2.1 Granite stone slab of colour black, Cherry/Ruby red

8.2.2.1 Area of slab upto 0.50 sqm sqm 80 5413.5 ₹ 433,080.00

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592

12.41 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal

expansion, (i) Single socketed pipes.

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain

water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,

including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making

good the wall etc. complete.

13.1 12 mm cement plaster of mix :

13.5 15 mm cement plaster on rough side of single or half brick wall of mix :

13.16 6 mm cement plaster of mix :

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50

13.41 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even

shade and colour :

New work (two or more coats) over and including water thinnable priming coat with cement primer

having VOC content less than 50 gram/litre

13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:

New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior

primer applied @ 0.90 litre/10 sqm)

13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

13.61.1 Two or more coats on new work sqm 200 155.9 ₹ 31,180.00

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and

manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Repair of Building

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including

cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls

complete, including disposal of rubbish to the dumping ground, all complete as per direction of

Engineer-in-Charge

14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) sqm 200 547.2 ₹ 109,440.00

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats,

architrave, holdfasts etc. complete and stacking within 50 metres lead

15.12.2 Of area beyond 3 sq. metres sqm 340.4 502.75 ₹ 171,136.10

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within

50 metres lead :

15.13.2 Of area beyond 3 sq. metres Sqm 80 188.9 ₹ 15,112.00

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50

15.23.1 For thickness of tiles 10 mm to 25 mm sqm 628 73.4 ₹ 46,095.20

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded

built up standard tubular sections/ appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including

necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/

neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed

mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling,

C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of

Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

21.1.1 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 200.00 530.9 ₹ 106,180.00

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with

21.3 EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of

engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) sqm 20.00 1176.8 ₹ 23,536.00

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with

seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with

manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures

complete, including cutting and making good the walls and floors wherever required :

17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 8 6515.55 ₹ 52,124.40

roviding and fixing white vitreous china flat back or wall corner type lipped front urinal basin of

430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard

flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of

fittings and brackets, cutting and making good the walls and floors wherever required :

17.4.1 one urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 12.00 6258.75 ₹ 75,105.00

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P.

17.7 brass waste of standard pattern, including painting of fittings and brackets, cutting and making

good the walls wherever require:

17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Each 8 2684.85 ₹ 21,478.80

Digitally signed by PRIYA

Sl no. Description Unit Qty

Item SOR NSOR SOR NSOR

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete

17.31 with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers Each 12 1607.95 ₹ 19,295.40

Providing and fixing P.V.C. Waste pipe for sink or wash basin including P.V.C. waste fittings

17.28.1 Semi rigid pipe

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the

direction of Engineer-in-charge.

DSR-17.34 Providing and fixing toilet paper holder :

Water Supply Work

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &

cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at

1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same including testing of joints complete as per direction of

Engineer in Charge. Concealed work, including cutting chases and making good the walls

18.8.1 15 mm nominal dia pipe Metre 40 497.8 ₹ 19,912.00

18.8.2 20 mm nominal dia pipe Metre 20.00 537.60 ₹ 10,752.00

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making

good the walls etc.

Internal work - Exposed on Wall For Roof

18.10.3 25 mm dia nominal bore Metre 20.00 551.70 ₹ 11,034.00

18.10.4 32 mm dia nominal bore Metre 20.00 667.00 ₹ 13,340.00

18.10.5 40 mm dia nominal bore Metre 20.00 811.90 ₹ 16,238.00

18.10.6 50 mm dia nominal bore Metre 20.00 1048.35 ₹ 20,967.00

18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and

18.50 weighing not less than 690

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality

conforming to IS:8931

18.53.1 15 mm nominal bore Each 10 574.3 ₹ 5,743.00

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable in surface / recessed medium class PVC conduit, with modular

1.1 switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single

core cable etc as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without

independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable

in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated

copper conductor single core cable etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

1.31 recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps Each 30.00 507.19 ₹ 15,215.82

modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

1.32 recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 Each 30.00 623.09 ₹ 18,692.81

amps modular switch, connection etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess

1.57 including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" Each 30 773.0191 ₹ 23,190.57

curve including connections, painting etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

1.24.7 TV antenna socket outlet Each 20 157.3684 ₹ 3,147.37

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for

1.27 modular switches in recess etc. as

Supplying and fixing following Modular base & cover plate on

existing modular metal boxes etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

1.24.6 Telephone socket with shtter outlet Each 15.00 157.37 ₹ 2,360.53

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in

1.21 surface/recess including cutting the wall and making good the same in case of recessed conduit as

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding

modular plate as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar,

earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit

2.1 breaker suitable for inductive load of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

2.10.5 Triple pole and neutral 2.00 1092.00 ₹ 2,184.00

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess i/c

2.14 providing and fixing 25 amp modular socket outlet and 25 Amps modular SP MCB, “C” curve including EACH 12.00 639.00 ₹ 7,668.00

connection, painting etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual

current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB EACH 6.00 2640.00 ₹ 15,840.00

complete with connections, testing and commissioning etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed steel conduit as required

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and

5.4 providing masonry enclosure with cover plate having locking arrangement and watering pipe of Set 10.00 7944.98 ₹ 79,449.78

2.7 meterlong etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including

connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Digitally signed by PRIYA

Sl no. Description Unit Qty

Item SOR NSOR SOR NSOR

5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recessfor connections etc. as required RM 50.00 259.45 ₹ 12,972.26

Providing and fixing 6 SWG dia G.I. wire on surface or in recess

5.18 for loop earthing along with existing surface/ recessed conduit/ RM 50.00 44.66 ₹ 2,232.93

submain wiring/ cable as required.

Providing and fixing health faucet with 8 mm dia and 1.2 m long flexible tube and wall hook

including all fittings

waterproofing with weather coat anti dustand primer including finishing with advance latex plus and

Supplying and fixing Surface mounted of 36 W 2x2ft LED LIGHT complete with electronic driver &

NS item LED directly on ceiling including connection with 1.5 sq.mm FR PVC insulated copper Each 20.00 2052.00 41040.00

conductor cable and earthing the body etc. as required.

Supplying and fixing Surface mounted 20 watt LED Tube light complete with electronic driver & LED

NS item directly on ceiling/wall including connection with 1.5 sq.mm FR PVC insulated copper Each 20 1349.70 26994.00

conductor cable and earthing the body etc. as required.

Supplying and fixing Surface mounted 12 watt LED downlighter complete with integrated driver &

NS item LED directly on ceiling including connection with 1.5 sq.mm FR PVC insulated copper Mtr. 20.00 882.00 17640.00

conductor cable and earthing the body etc. as required.

Supply and installation of ceiling fan of 1200mm sweep including wiring the down rods of

standard length (up to 30cm) with 1.5sq mm FR PVC insulated copper conductor etc.

Supply and installation of 200 mm, 230V A.C exhaust fan in the

existing opening including making good the damage connection testing commissioning etc as required

Supply, following sizes of PVC sheathed XLPE insulated Aluminium conductor multicore

armoured cable of 1.1 KV grade.

NS item 3.5C- 95 sq mm Aluminium RM 40.00 946 37840.00

NS item 4C- 25 sq mm Aluminium RM 40 351 14040.00

NS item 4C- 16 sq mm Aluminium RM 40 278 11120.00

NS item 4C- 10 sq mm Aluminium RM 40.00 235 9400.00

Repair of honey combing area with Epoxy nozzle grout and after grouting traetment of surface with

a Providing and applying epoxy putty sqm 100.00 633.2 63320.00

b Providing and applying low viscous epoxy grout kg 25.00 981.3 24532.50

Providing and applying nozzle fixing and removing nozzle after grouting. Traetment of surface with

Digitally signed by PRIYA

RENOVATION WORK AT MDTC BLOCK -KHADI AND VILLAGE INDUSTRIES COMMISSION (KVIC) IN PATNA

DSR 2023 Rate Amount

Sl no. Description Unit Qty

Item DSR NDSR DSR NDSR

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm

nominal size derived from natural sources)

4.3 Centering and shuttering including strutting, propping etc. And removal of form work for :

4.3.1 Foundations, footings, bases for columns. Sqm 40.75 392.15 15980.11

Reinforced cement concrete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and

binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 500.00 107.85 53925.00

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced

cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland

Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per

5.33 IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without

impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but

excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-

charge; for the following grades of concrete

5.33.2 All works above plinth level upto floor V level. M-25 Cum 10.00 9860.40 98604.00

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 10 7132.25 71322.50

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure

above plinth level up to floor V level in all shapes and sizes in :

6.4.2 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 100 9105.95 910595.00

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level

6.13.2 Cement mortar 1:4 (1 cement : 4 coarse sand) sqm 250 1123.8 280950.00

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half

Wood & PVC Work

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought

9.1 framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast

lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood Cum 1.16 142949.7 165401.74

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) nondecorative type,

9.21 core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and face veneers on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 66.045 2392.65 158022.57

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush

door shutters (over all area of door shutter to be measured)

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded)

(overall area of door shutter to be measured):

9.24.1 Rectangular or Square sqm 66.045 199.15 13152.86

9.26 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). sqm 66.045 106.7 7047.00

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or

round bars etc. including priming coat with approved steel primer all complete.

9.48.1 Fixed to steel windows by welding kg 5000 219.1 1095500.00

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than

9.96 grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC

10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10

as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not

9.101 less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary

screws etc. complete.

9.101.1 Single Rubber stopper each 34 39.6 1346.40

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/

9.127 suede finish with high density protective surface layer and reverse side of adhesive bonding quality

conforming to IS : 2046 Type S, including cost of adhesive of approved quality

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free

uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having

minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4

profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild

steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads,

interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket,

hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching

polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers,

plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be

9.147A mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes

for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent

finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and

quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-

in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved

by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with /

without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231

shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute,

to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3

(ii) Sites with structure height more than 20m for all wind speeds

Digitally signed by PRIYA

Sl no. Description Unit Qty

Item DSR NDSR DSR NDSR

Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium

channel for roller track, wool pile, nylon rollers with SS 304 body.

Using R2 series with frame (70mm & above) x (40mm & above) & both glazed and fly screen sash (25mm

9.147A4.1 & above) x (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto Sqm 232 10993.55 2550503.60

Structural steel work

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including

cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer using structural steel etc. as required

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 500 172.60 86300.00

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows,

all complete with :

10.30.1 4.0 mm thick glass panes sqm 60 1064.65 63879.00

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry

11.26 mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base

of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick

11.27 cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to sqm 25 2354.7 58867.50

match the shade of the slabs, including rubbing and polishing complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)

with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and

shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry

@ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,

8.31 black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm sqm 100 1267.95 126795.00

thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per

sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the

manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory,

11.37 Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with sqm 50 1096.55 54827.50

grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment

etc., complete.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type

12.41 A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)

Single socketed pipes.

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water

pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,

including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good

the wall etc. complete.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of

special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both

side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with

flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash

fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed

with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to

which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each

having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every

junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30

mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,

with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section

and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including

jointing and finishing to a flush finish of tapered and square edges of the board with recommended

jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm

on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification

and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame

of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the

Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS

certification marks)

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false

ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking

metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side)

consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made

from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm

made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre

to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33

mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size

600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of

size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm

centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified

edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for

services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’

runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with

12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of

size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of

all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings

and as directed by Engineer-in-Charge.

Digitally signed by PRIYA

Sl no. Description Unit Qty

Item DSR NDSR DSR NDSR

Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of

alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with

characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss

12.65 members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel

screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and

sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be

paid separately)

0.71 mm, Aluminium Colour coated troughed profile with center to center pitch of 200 mm, depth of 32

mm, overall profile width1092 mm, cover width 1000mm.

Providing and fixing of Pre-coated colour or mill finish Aluminium Roofing Accessories in 0.71 mm

thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)] For color, coating

12.66 shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using

self drilling/tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer

12.66.1 Precoated/mill finish aluminium Ridges plain (500- 600mm) meter 236 1066.2 251623.20

12.66.6 Precoated/mill finish aluminium Gutter (600 mm over all girth) meter 160 1808.65 289384.00

13.1 12 mm cement plaster of mix :

13.5 15 mm cement plaster on rough side of single or half brick wall of mix :

13.16 6 mm cement plaster of mix :

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50

13.41 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even

shade and colour :

New work (two or more coats) over and including water thinnable priming coat with cement primer

having VOC content less than 50 gram/litre

13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:

New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior

primer applied @ 0.90 litre/10 sqm)

13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

13.61.1 Two or more coats on new work sqm 250 155.9 38975.00

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and

manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Repairs of Building

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including

cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls

complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-

14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) sqm 200 547.2 109440.00

14.5 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

14.5.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) sqm 150 1090.65 163597.50

14.9 Renewal of old putty of glass panes (length) meter 1000 56.15 56150.00

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story

height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup

& lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the

scaffolding for working platform etc. and maintaining it in a serviceable condition for the required

14.72 duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, sqm 1760 338.25 595320.00

runners, connection with the building etc wherever required for inspection of work at required locations

with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-

charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will

be made once irrespective of duration of scaffolding.

Dismantling and Demolishing

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50

metres lead as per direction of Engineer - in - charge.

15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) cum 15.75 1503.6 23681.70

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and

disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

15.7.4 In cement Mortar cum 25 2060.2 51505.00

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats,

architrave, holdfasts etc. complete and stacking within 50 metres lead

15.12.2 Of area beyond 3 sq. metres sqm 340.4 502.75 171136.10

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50

15.13.2 Of area beyond 3 sq. metres Sqm 340.4 188.9 64301.56

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50

metres lead of:

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade

made by block making machine with strong vibratory compaction, of approved size, design & shape, laid

in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the

joints with line sand etc. all complete as per the direction of Engineer-in-charge.

LOCATION-ENTRANCE AND OPEN AREA OF MDTC BLOCK

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in

position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse

sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not

to more than 5mm), including making drainage opening wherever required complete etc. as per direction

of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment).

(Precast C.C. kerb stone shall be approved by Engineer-in-charge)

LOCATION-ENTRANCE

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in

16.42 pavements, laid to required slope and camber in panels as required including consolidation finishing and cum 80 7993.8 639504.00

tamping complete.

LOCATION-ENTRANCE

Digitally signed by PRIYA

Sl no. Description Unit Qty

Item DSR NDSR DSR NDSR

Construction of granular sub-base by providing close graded Material conforming to specifications,

mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads

16.78 & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and

compacting with vibratory power roller to achieve the desired density, complete as per specifications and

directions of Engineer-in-Charge

16.78.1 With material conforming to Grade-I (size range 75 mm to 0.075 mm) having C cum 60 2784 167040.00

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built

up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to

IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the

gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.

Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever

required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless

steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.

(Glazing, paneling and dash fasteners to be paid for separately)

21.1.1 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 400.00 530.9 212360.00

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with

21.3 EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of

engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) sqm 50.00 1176.8 58840.00

Waterproofing work

Providing & laying integral cement based water proofing treatment including preparation of surface

as required for treatment of roofs, balconies, terraces etc consisting of following operations:

a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing

compound confirming to IS. 2645 and approved by Engineer-in-charge over the RCC slab

including adjoining walls upto 300mm height including cleaning the surface before treatment. b)

Laying brick bats with mortar using broken bricks/brick bats 25mm to 115mm size with 50% of

cement mortar 1:5 (1 cement : 5 coarse sand ) admixed with water proofing compound

confirming to IS : 2645 and approved by Engineer-in- charge over 20 mm thick layer of cement of 1:5 (

1 cement : 5 coarse sand ) admixed with water proofing compound confirming to IS : 2645 and

approved by Engineer-in-charge to required slope and treating similarly the

adjoining walls upto 300mm height including rounding of junctions of walls and slabs. c) After two

days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement

admixed with water proofing compound confirming to IS : 2645 and approved by Engineer-in-

charge. d) Finishing the surface with 20 mm thick jointless cement mortar 1:4 (1 cement : 4 coarse

sand ) admixed with water proofing compound confirming to IS : 2645 and approved by Engineer-in-

charge including laying glass fibre cloth of approved quality in top layer and finally finishing the

surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep.

e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for

curing and for final test. All above operations to be done in order and as directed and specified by

the Engineer-in-charge:

With average thickness of 120mm and minimum thickness at khurra

LOCATION-MDTC BLOCK AND GUARD ROOM

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat

and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually

controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete,

including cutting and making good the walls and floors wherever required :

17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 2 6515.55 13031.10

LOCATION-MDTC BLOCK, GUARD ROOM AND HOSTEL

roviding and fixing white vitreous china flat back or wall corner type lipped front urinal basin of

430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard

flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of

fittings and brackets, cutting and making good the walls and floors wherever required :

17.4.1 one urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 2.00 6258.75 12517.50

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P.

17.7 brass waste of standard pattern, including painting of fittings and brackets, cutting and making good

the walls wherever require:

17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Each 2 2684.85 5369.70

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete

with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing P.V.C. Waste pipe for sink or wash basin including P.V.C. waste fittings

17.28.1 Semi rigid pipe

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the

direction of Engineer-in-charge.

DSR-17.34 Providing and fixing toilet paper holder :

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &

cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at

1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost

of cutting chases and making good the same including testing of joints complete as per direction of

Engineer in Charge. Concealed work, including cutting chases and making good the walls

18.8.1 15 mm nominal dia pipe Metre 20 497.8 9956.00

18.8.2 20 mm nominal dia pipe Metre 10.00 537.60 5376.00

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making

good the walls etc.

Internal work - Exposed on Wall For Roof

18.10.3 25 mm dia nominal bore Metre 20.00 551.70 11034.00

18.10.4 32 mm dia nominal bore Metre 20.00 667.00 13340.00

18.10.5 40 mm dia nominal bore Metre 20.00 811.90 16238.00

18.10.6 50 mm dia nominal bore Metre 20.00 1048.35 20967.00

Digitally signed by PRIYA

Sl no. Description Unit Qty

Item DSR NDSR DSR NDSR

18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

18.49.1 15 mm nominal bore Each 2.00 506.80 1013.60

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and

18.50 weighing not less than 690

18.50.1 15 mm nominal bore Each 2.00 820.70 1641.40

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality

conforming to IS:8931

18.53.1 15 mm nominal bore Each 2 574.3 1148.60

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked,

18.48 with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow Leter 2000 11 22000.00

pipes but without fittings and the base support for tank.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch,

1.1 modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper

conductor single

core cable etc as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without

independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in

surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper

conductor single core cable etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

1.31 recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps Each 5.00 507.19 2535.97

modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in FRLSont

1.32 on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular Each 5.00 623.09 3115.47

socket outlet and 15/16 amps modular switch, connection etc. as required

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess

1.57 including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" Each 20 773.0191 15460.38

curve including connections, painting etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box

including connections but excluding modular plate etc. as required.

1.24.7 TV antenna socket outlet Each 20 157.3684 3147.37

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular

1.27 switches in recess etc. as

Supplying and fixing following Modular base & cover plate on

existing modular metal boxes etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box

including connections but excluding modular plate etc. as required.

1.24.6 Telephone socket with shtter outlet Each 15.00 157.37 2360.53

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding

modular plate as required.

Providing and fixing health faucet with 8 mm dia and 1.2 m long flexible tube and wall hook 3953.20

NS ITEM each 2.00 1976.6

including all fittings

NS ITEM Supplying and fixing of false ceiling height -OCTANE SQUARE LED PANEL 18 W 4000 K each 100.00 1296 129600.00

waterproofing with weather coat anti dustand primer including finishing with advance latex plus and 464750.00

NS ITEM sqm 500.00 929.50

Repair of honey combing area with Epoxy nozzle grout and after grouting traetment of surface with

a Providing and applying epoxy putty sqm 50.00 633.2 633.2 31660.00

b Providing and applying low viscous epoxy grout kg 10.00 981.3 981.3 9813.00

Providing and applying nozzle fixing and removing nozzle after grouting. Traetment of surface with 30840.00

Digitally signed by PRIYA