MAINT OF STP AND CONNETED ITEMS AT AF STN UTARLAI

Supply only Sodium Hypo chlorite solution (liquid chlorine) having 10% chlorine content in sealed HDPE container confirmed to IS code all as directed by Engr-in-charge

Supply only Poly Electrolyte (PE) in sealed bag confirmed to IS code all as directed by Engr-in-charge

Supply only Poly Aluminium Chlorite (PAC) 10% content in sealed HDPE container confirmed to IS code all as directed by Engr-in-charge

Supply and installation, testing, commissioning outdoor type cubical type LT Panel made out of 3.0mm thick CRCA sheet , 415 Volt, 3 phase , 50 HZ supply factory made of MS angle section 40 x40x 5mm frame with front and back openable double door with provision of locking arrangement dust & vermin proof , gasket, TPN busbar shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof duly spray painted inside and outside of panel with one coat of red oxide primer and two coat of synthetic enamel paint grey complete all as specified and directed & Consisting of the following accessories:- (A) Incomimg:(i) MCCB 200 Amps,icu-35 Ka,4 pole,415 v-01 Nos(ii) phase indication lamps LEd type RYB including holder with 0.5 A MCB -01 set of three (iii) Voltmeter digital square type 0.500 V with selecter switch.01nos (iv)Ampere meter digital square type 0.250 amps with selecter switch inclu set of diacast Cts of suitable ratio complete-01nos (B) Bus bar Electrolytic high conductivity aluminium busbar of appropriate cross sectional area -04nos (RYB phases-03nos and Black -01 for neutral). (C) Outgoing: (I) 20 HP star deltta starter-02 Nos :(I)10 HP DOL starter - 04 Nos (ii) 5 HP DOL starter-04 Nos complete all as specified and as directed by Engr-in-charge. Note: (i) PCC 1:2:4 for grouting included in the total cost of Panel (ii) Excavation and earth included in total cost (iii) Necessarty lugs for cable fitment included in total cost of panel (iv) FRLS copper conductor cable of suitable size shall be used for Control wiring for LT panel complete for incoming/outgoing.

Rotational moulded polyethylene water storage tanks 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

M&L for complete removal of existing paint of Elect motor with pump including base frame and applying two coats of spray paint using synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge.

Supply and fix in replacement of pressure gauge air water meter of pressure range 0-10 kg/Sqcm complete all as specified and directed by Engineer-in-charge.

M&L for laying as in replacement of MS pipe 80mm bore medium grade including cutting, welding and fabricating to match as per existing shape including necessary flange, bend, tee, reducer, including nuts, bolts, washers inclusive of one primer coat, two coat of synthetic enamel paint over the pipe all as directed by Engr-in-Charge

M&L for laying as in replacement of MS pipe 100mm bore medium grade including cutting, welding and fabricating to match as per existing shape including necessary flange, bend, tee, reducer, including nuts, bolts, washers inclusive of one primer coat, two coat of synthetic enamel paint over the pipe all as directed by Engr-in-Charge

M&L for laying as in replacement of MS pipe 150mm bore medium grade including cutting, welding and fabricating to match as per existing shape including necessary flange, bend, tee, reducer, including nuts, bolts, washers inclusive of one primer coat, two coat of synthetic enamel paint over the pipe all as directed by Engr-in-Charge