Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
Tender Value
₹4.3 L
EMD Value
₹8,694
Closing Date
20 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER CIVIL
NO65, GANGA NAGAR 3RD STREET, KODAMBAKKAM, CHENNAI 600024.
Dismembering modular work stations and maintenance repairs to toilets at 2nd floor for renting out to CPCB in ADMIN building , Guindy, Chennai
2024_BSNL_191312_1
24RC2/BSNL/CD-MMN/CHN/2023-24
Open Tender
Civil Works - Others
Item Rate
30 days
GUINDY
AS PER TENDER DOCUMENT
3 documents required · 3 mandatory
₹590
BSNL,CHENNAI TELEPHONES
₹8,694
Yes
23 Mar 2024
14 Mar 2024
22 Mar 2024
14 Mar 2024
20 Mar 2024
14 Mar 2024
Amount
Making opening ot required size in partition by Dismantling double skin ANG partitions by taking out the particle board on both sides and cutting the Aluminum vertical and horizontal frames and refixing the frames and particle board at the required positions for fixing the door including necessary additional frames,clamps, clips, screws all complete as directed by the Engineer-in-charge(The payment for fixing door shall be paid separetely)
Area:1.80mx3.05
Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs with cement mortar complete, to match existing surface i/c disposal of mulba/rubbish upto a lead of 50m and all lifts and stacking within the compound, all complete as per directions of Engineer-In-Charge.
For door/ window/ clerestory window.
Providing, hoisting and fixing up to floor seven level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor seven level, including the cost of required centering, shuttering but , including the cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand ( crushed stone sand) : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Size:1.5x0.23x0.15 with 6 Nos 10mm dia reinforcement and 8mm stirrups at 150mm c/c.
Providing and fixing the door shutter by taking out the non functioning door shutters or with available door shutter by cutting , jointing and servicing the shutter to true alingnment with required screws and available particle board etc all complete as directed by the E-in-C..
Dismembering the modular work station without damaging the unit and stacking the same at site all complete as directed by the Engineer-in-Charge.
Cubical type/ Bench type SIZE:1.2mX1.2m size and 1.5mX1.5m size
Carriage of dismembered modular work stations cubical or bench type frames and board ,panels etc. from Second Floor to Basement floor of ADMIN BUILDING, GUINDY by head loads and stacking the same at site all complete by the ENGINEER-IN-CHARGE.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Conveyance charges for transporting Modular work stations by mechanical transport from Admin building, Guindy to Stores at GF,St.Thomas mount TE building, Chennai including loading and unloading whatever required at both sites and stacking at GF site all complete as Directed by the Engineer-in-charge.
Deep cleaning of Mosaic flooring to remove off dirt, dust,stains etc by manually or required machines using necessary floor cleaning liquid and with required safety measures to protect exsiting ANG partitions all complete as directed by the Engineer-in-charge.
Carpet area excluding lift and toilets
Providing and fixing cast iron die cast body tubular type universal hydraulic door closer ,hardwyn make (classic queen ) or equivalent with necessary accessories and screws etc. complete
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
250 mmX16mm
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete :-
Twin rubber stopper
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.
Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge.
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :
One or more coats on old work.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
Two or more coats on new work.
Repairing Aluminium sliding window by taking out the shutter panels and removing the bent if any and replacing the PVC lock, wheel, guide channel and neoprene gasket etc. and refixing the shutter panels to its true alignment to facilitate smooth functioning all complete as directed by the Engineer-in-charge.
Dismantling I.W.C. Pan in toilet along with flooring concrete/ Brick jelly concrete upto 45cm depth to an area of toilet room size including disposal of dismantled materials within 50 m lead and all lifts all complete as per directions of Engineer-in- Charge.
Taking out the existing PVC door and refixing the same with new SS hinges and making good the door to facillitate easy opening all complete as directed by the Engineer-in-charge.
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing :
1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources).
Filling available excavated earth/ Brick jelly (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 6.0 m. (at second floor)
Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :
W.C. pan with ISI marked white solid plastic seat and lid
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC pipes conforming to IS : 13592 Type A including jointing conforming to IS :5382 leaving 10 mm gap for thermal expansion.
110 mm bend (Bend 87.5° )
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall
20 mm nominal outer dia. Pipes.
Providing and fixing unplasticised PVC connection pipe with brass unions :
15 mm nominal bore, 30 cm length
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Flexible pipe 32 mm dia
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:
15 mm nominal bore.
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 :
15mm nominal bore
Providing and fixing C.P. brass pillar cock of approved quality :
15 mm nominal bore
Providing and fixing C.P. brass health faucet of standard design and of approved make.
15 mm nominal bore
Providing and fixing PVC floor trap of approved design complete.
Providing and fixing PVC floor grating of approved design complete.
Providing and fixing UPVC ball Valve with handle (New Work) all complete as directed by the Engineer-in-charge.
25mm nominal bore
Deep Cleaning of toilets water closet and wash area wall and floor tiles, urinal panel , wash basins, platform etc. using toilet cleaning acid /chemicals to remove off the stains, dirt etc. to facilitate comfort usage all complete as directed by the Engineer-in-Charge.
Taking out existing wooden door shutter, repair by cutting and refixing of repaired door shutters to existing door frames, excluding hinge all complete as per the direction of the Engineer-in-charge.
Cleaning manhole chamber, removing the stagnated sewage water/ sludge, dust, silt, waste soil etc. and disposal of removed materials within 50m lead by taking earth pit and finally flushing the manhole with plenty of water to prepare the manhole to function properly. Due Care shall be taken while operating/ entering the manholes from direct inhaling of poisonous gases if any etc.all complete as directed .
All types and size of Manhole
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
For pipes 100 to 250 mm diameter
Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :
Old work (one or more coats)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of ISt quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .