REPAIR / REPLACEMENT OF JOINERY, PLUMBING FITTINGS ETC AND ALLIED B AND R MAINT WORKS IN ACCN OF MES AND STN AMINITIES AT DHANA MILITARY STN

Amount

Taking down wooden chowkhats or frame area exc 1.5 Sqm and not exc 4 Sqm Each with shutter (without taking off shutter from frame), complete all as specified and directed.

All as per item No 1 above but not exc 1.5 Sqm Each, complete all as specified and directed.

Taking down wooden shutter of any description exc 1 Sqm and not exc 2 Sqm Each complete all as specified and directed.

Supply & fixing 2nd class hard wood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete including treating the ends of chowkhats with coal tar/black paint etc, complete all as specified and directed.

Supply & fixing 105 x 60 mm size Pressed steel frames 1.25mm thick for doors with one rebate including necessary fixing lugs, hinges, lock strike plate, and making good with plastering in CM 1:4 including distempering as required at site etc, complete all as specified and directed.

Supply & fixing 165 x 60 mm size Pressed steel frames 1.25mm thick for doors with two rebate including necessary fixing lugs, hinges, lock strike plate, and making good with plastering in CM 1:4 including distempering as required at site etc, complete as specified and directed.

Supply & fixing 35mm thick factory made second class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive gauze with sash bars, edges of framing plain fitted with cut and mitred beads (all around of 1st class soft wood) for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(b) fitted to chowkhats, complete as specified and directed.

Supply and fixing 35 mm thick 2nd class HW plain, framed, factory made paneled shutters (two panels), with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), cleaned seasoned and chemically pressure treated, complete all as specified and directed.

Supply and fixing factory made flush shutters, solid core construction 30 mm thick with block board core and plywood face panels, commercial type on both side conforming to IS-2202 (Part -I) 1983, complete all as specified and directed.

Material & labour in repair 18/19 mm thick prelaminated particle board, interior graded, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in Shutter of Cupboards/Kitchen cupboard with teak beading of all sides, complete all as specified and directed.

Supply & fixing solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet as reinforced with M.S. square tube and fixing in opening as per specification & drawing, complete all as specified and as directed by the Engineer-in-Charge.

Supply & fixing factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing, complete all as specified and as directed by the Engineer-in-Charge.

Supply & fixing 2nd class hard wood 30mm thick (Factory made) Glazed and skeleton shutters for window / ventilator etc. are provided with stiles and rails, divided into square, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkats, complete all as specified and directed.

Supply & fixing steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded, complete as specified and directed.

All as per item No 14 above but without glazing bars complete all specified and directed.

Supply & fixing Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

Material & labour for mild steel work in framed work such as grills, gratings, guard bars etc., including angle frame and hinges where required with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290.Gde-E-165, complete all as specified and directed.

Material & labour for mild steel 0.63 mm thick, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joint with riveted or welded seams, including bending or turning up mitred angles etc as requires, complete all as specified and directed.

Material and labour for framed work Fe 410-W (Grade - E-250) as in door or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings etc, complete all as specified and directed.

Supply & fixing in repairs sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in Each panel 3 mm thick complete all as per specified and directed.

Supply & fixing sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in Each panel 3 mm thick complete all as per specified and directed.

Supply & fixing galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed.

Supply & fixing in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed.

Supply and Fixing of Stainless steel Drapery Rods (curtain rods) of 25 mm dia along with all accessories as per requirements such as Holding Bracket, Finials (End capping), screws, fissures etc. Including fixing of same on the desired door windows locations on all floors and in any length, complete all as specified and directed.

Supply and fixing 100 mm butt hinges medium weight cold rolled mild steel ISI marked fixed with screws complete all as specified and directed.

Supply & fixing 150mm extruded aluminium alloy handles, fabricated type anodized, complete all as specified and directed.

Supply & fixing 150mm long aluminium anodized barrel tower bolt of extruded section, complete all as specified and directed.

Supply & fixing 300mm long aluminium anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast of extruded sections and fixing bolt and sliding bolts of extruded sections of cast aluminium alloy, complete all as specified and directed.

Supply & fixing 500 ltr capacity rotational mounded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 15mm bore PVC float valve high pressure with epoxy coated aluminium rod and high density plastic valve screwed for iron pipe complete and disconnecting unserviceable PVC/Cement water storage tank of 500 Ltr capacity and removing outside MD land all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Supply & fixing steel water tubing medium grade galvanizes fixed to walls, floors, roof ceiling etc including all tube fittings of 15mm bore complete all as specified and directed.

Supply & fixing in repair 15mm bore ball valve, high pressure with epoxy coated aluminium rod and high density plastic valve screwed for iron pipe and fixed of 20mm dia (min wt 210 gram) complete all as specified and directed.

Supply & fixing in repair vitreous china wash basin white flat back size 550x400mm excluding 15mm dia fancy type PVC pillar taps, PVC waste pipe, PVC waste coupling brackets, PVC connections 15mm dia 450mm long complete all as specified and directed.

Supply & fixing in repair Bib tap 15mm standard of cast copper alloy with crutch or butterfly handle screwed down for iron pipe and fixed complete all as specified and directed.

Supply & Fix Tumbler Holder standard of Cast copper alloy complete all as specified and directed. Make:- Jaquar Cat part No ACN-1141N.

Supply & Fix Soap Dish Holder standard of Cast copper alloy complete all as specified and directed. Make:- Jaquar Cat part No ACN-1131N.

Supply & Fix Towel Rack 600 mm Long with lower Hangers chromium plated complete all as specified and directed. Make:- Jaquar Cat Part No ACN-1181N

Supply & Fix overhead Shower 200 x 200 mm Square shape single flow (ABS Bode Chrome plated with Gray Face plate) with Rubit cleaning system, complete all as specified and directed. Make:- Jaquar Cat Part No OHS-35497

Supply & Fix Hand Shower 80x40mm Rectangular Shape Single Flow (ABS Body Chrome plated with Black Face plate), complete all as specified and directed. Make:- Jaquar Cat Part No HSH-1783

Supply & Fix 15mm Angular Stop Cock With wall Flange Chrome plated, complete all as specified and directed. Make:- Jaquar Cat Part NO FLR-5053N

Supply & Fix 15 mm Single lever Basin Mixer without popup waste system with 450 mm long Braided hoses, complete all as specified and directed. Make:- Jaquar Cat Part No FLR-5001B

Supply & fixing in repair 15mm stop valve standard of cast copper alloy with crutch or butterfly handle high pressure screwed for iron pipe and fixed complete all as specified and directed.

Supply & fixing in repair 15mm dia shower rose of PTMT any colour high pressure screwed for iron pipe and fixed (min wt 40 gram ) complete all as specified and directed.

Supply & Fixing in repair PVC tank cover suitable for PVC tank of 500ltrs capacity including 2 x PVC brackets etc, complete all as specified and directed.

Supply & Fixing HDPE pipes of pressure rating 6kgf/sqcm of 40 mm dia fixed/concealed on walls or floors complete all as specified and directed.

Supply & fixing in repairs vitreous China squatting pan, 'Orrissa' pattern, size 580 mm x 440 mm white, with integral foot rests (excluding flushing cistern, flush pipe and waste pipe) and ‘P’ or ‘S’ trap front or back inlet including concrete bedding, complete all as specified and directed.

Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet seat, black, closed pattern with flat bottom and cover with mild steel chromium plated hinging devices and chromium plated Jet arrangement with 1.00 mtr long flexible pipe for fixed with suitable system complete all as specified and directed.

Supply & fixing as in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets, and PVC connection 15mm dia complete all as specified and directed.

Material & labour for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of Pink primer complete all as specified and directed.

Material & labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.

Demolition of brick / stone masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

Material & labour for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6, complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

Material & labour for rendering 15mm thick in CM (1:4) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement), including preparing new plastered surface of wall and applying two coats of white wash, complete all as specified and directed.

Material & labour for rendering 15mm thick in CM (1:6) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement) including preparing new plastered surface of wall and applying two coats of white wash, complete all as specified and directed.

Material & Labour for complete removal of old finishes i.e white wash, pili matti etc. and applying two coats of Oil bound distemper over a coat of 1.5mm thick (average layer) wall care putty etc, complete all as specified and directed.

Material & Labour for preparation of plastered or unplastered old surface and applying two coats of white wash on ceiling, complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and paving’s not exceeding 15 cm thickness. (Below or above ground level), complete all as specified and directed.

Material & labour for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in floorings including finishing the surface even and smooth with using extra cement, complete all as specified and directed.

Supply & fixing glass dividing strips, 38 x 3 mm thick and inserted in position, confirm to design, complete all as specified and directed.

Material & labour for 50mm thick cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate finished even & smooth without using extra cement as in plinth protection including forming joint to full depth at every 3.0m in forming and at every change of direction and filled mixture of bitumen and sand (1:3) by weight, complete all as specified and directed.

Dismantling of tiles of any descriptions in floors or dados etc. including cement mortar bedding (but not backing), complete all as specified and directed.

Material & labour machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in cooking platform etc. and other similar situation etc, complete all as specified and directed.

Material & labour for non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed

Material & Labour for Glazed ceramic colour tiles of size 300 x 450 x 7mm thick in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:6, complete all as specified and directed.

Material & Labour for Non-skid ceramic colour tiles 7 to 8 mm thick, (square/rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4, complete all as specified and as directed.

All as per Item No.68 above but as in vertical surfaces such as wall, skirting and dado etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4, complete as specified and directed.

Supply & Fix Bathroom Cabinet of hard thermosetting plastic of size 600x450 mm, fitted with superior quality distortion free 4 mm thick mirror, complete all as specified and as directed.

Supply & fixing in repair brass chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges, complete all as specified and directed.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 10865.00 /- ]

siddhant construction

Pandey Construction and Engrs