Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.2 LAccepted-AOC 114 BARH CHONDI TOWN BARH DISTT PATNA BIHAR PIN 803213 | PATNA | BIHAR | 803213 | L1 | Accepted-AOC Lowest amount quoted | |
| 2 | L2₹39.7 L+₹4.2 L (11.7%)Rejected-Finance 114 BARH CHONDI TOWN BARH DISTT PATNA BIHAR PIN 803213 | PATNA | BIHAR | 803213 | L2 | Rejected-Finance Second Lowest amount quoted | |
| 3 | L3₹40.9 L+₹5.4 L (15.3%)Rejected-Finance 114 BARH CHONDI TOWN BARH DISTT PATNA BIHAR PIN 803213 | PATNA | BIHAR | 803213 | L3 | Rejected-Finance Third Lowest amount quoted | |
| 4 | L4₹41.0 L+₹5.5 L (15.6%)Rejected-Finance | L4 | Rejected-Finance Highest amount quoted |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
15 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col P Aditya Deepak, GE
Garrison Engineer (East), Near COD Estate, Ranjhi, Jabalpur (MP)-482011
CERTAIN PETTY REPAIRS / MAINTENANCE OF DAILY BASIS B/R COMPLAINTS TO MD AND OTM OF JCOs/OR ACCN OF MCMM UNDER AGE B/R-I OF GE (EAST) JABALPUR
2024_MES_675249_1
8687/E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer (East) Jabalpur
Class D Category a (i)
7 documents required · 7 mandatory
₹500
Garrison Engineer (East) Jabalpur
₹98,000
Yes
23 Nov 2024
19 Sept 2024
17 Oct 2024
19 Sept 2024
15 Oct 2024
28 Sept 2024
19 Sept 2024 - 25 Sept 2024
Amount
Dismantling of single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed.
Dismantling battens for tiles of any size including tilting fillets spaced exc 15cm complete all as specified and directed.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
M&L for roof tiles, Manglore pattern, interlocking at side joints laid dry at any height including scaffolding etc complete all as specified and directed.
M&L for ridser or hip tiles to suit Manglore pattern of roofing tile, bedded and jointed in cement mortor 1:6 at any height including scaffolding etc complete all as specified and directed.
S&Ffor second class hardwood battens at 30 cm centres of sectional area 15 sq cm and n exc 25 sq cm complete all as specified and directed.
S&F for 0.63 mm thick galvanised corrugated mild steel sheeting, class-8 with two corrugations side lap, bent to a curve,fixed with L-type or J-type or cranked hook bolts and washers, ISI marked in roofs etc at any height including scaffolding etc., complete all as specified and as directed.
S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.
S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
S&Ffor roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.
S&F for MS steel flat iron as in wind tie for roof sheet including securing bolts (Fe-290 E-165) complete all as specified and directed.
Dismantling of wall & ceiling Boards ( fibre,pulp,insulation etc. ),or insulation board/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
S&Ffor powder coated aluminium snap grid frame work for false ceiling with aluminium angle 25 mm x 25 mm x 1.5 mm fixed to perimeter of wall, main 'T' runner 38 mm x 25 mm x 1.5 mm and secondary/cross 'T' runner 25 mm x 25 mm x 1.5 mm to be interlocked in such a way that the size of grid shall be 605 mm x 605 mm including 6 mm dia GI hangers (upto 1200 mm length) adjusting level fixed to roof by means of ceiling cleats made out of GI flat 40 x 3 mm, 60 mm long and expansion hold fasteners 12.5 mm dia , 40 mm long and 4 mm thick Non asbestos fibre board (E-board or V board) designer tiles (Electra) suitably fixed in false ceiling grid/frame with staples or screws complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for Virified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matc including screed bed of 15mm thick in CM 1:6 complete all as specified and directed.
M&L for Vitrified ceramic tiles 9-10mm thick in dado/skirting etc set and jointed in neat cement slurry and pointed in white cement to match with pigment including backing coat 10mm thick in CM 1:4 complete all as specified and directed.
S&F for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
S&F for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
S&F for Glazed ceramic tiles (450x300)x 8-10 mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 10 mm thick backing coat in CM 1:4 complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed in CM 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for Kota stone slab 20-25mm thickin riser steps, skirting or dadao and pillar laid over 10mm thick backing coat in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding laid over 20 mm thick screed bed in CM 1:4 rates including moulding and rounding complete all as specified and directed.
M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in roof/floors other than ground level beam, stair case, landing, chajjas and similar items including water proofing treatment in any layers and removal of debris to distance exceeding 250m and not exceeding 500m from the site complete all as specified and directed.
M&L for PCC 1:2:4 (Type B1 using 20 mm graded aggregate) levelling course average thick 40 mm, to match the undulations of roof complete all as specified and directed.
M&L for rendering 10 mm thick on fair faces of concrete surface in cement mortar 1:3 for receive the roof finishes with water proofing liquid. (WPL Shall be measured and paid separately) complete all as specified and directed.
M&L for fillet of 75mm size using PCC 1:2:4 type B-1 (using 20 mm graded aggregate) at the junction of all horizontal and vertical surfaces complete all as specified and directed.
M&L for APP based polymeric membrane minimum weighing 3.50 kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 160 gm/sqm) laid over primed surface including bituminous primer conforming to IS-3384-1965 applied @ 0.3 ltr/ Sqm by forced application complete all as speficied. Three course roof treatment consists of as under :- (i) Applying one coat of bituminous primer conforming to IS-3384-1965 @ 0.30 ltr/Sqm. (ii) laying APP based membrane as specififed. (iii) Applying a layer of blown grade bitumen 85/25 @ 1.2 Kg/Sqm conforming to IS : 702
M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( wt not less than 150 gms /sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 ltr/Sqm by forced complete all as specified and directed. Four course roof treatment consists of as under :- (a) Applying one coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr per sqm. (b) Laying of APP based membrane as specified thickness and weight. (c) Applying two coat of aluminium paint @ 100ml/sqm.
M&L for Cement concrete tiles 25 cm x 25 cm x 22 mm thick, machine pressed including provision of 15 mm thick screed bed in CM 1:4 with using water proofing joints shall be filled with grey cement and no pigments compound complete all as specified and directed.
Taking down chowkhat n exc 1.5 sqm each without taking of shutter from frame complete all as specified and directed.
Taking down chowkhat exc 1.5 sqm and n exc 4.00 sqm each without taking of shutter from frame complete all as specified and directed.
Taking down Shutters of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed.
Taking down Shutters of any description exc 2 sqm each complete all as specified and directed.
S&F for Aluminium powder coated ventilators partly fix and partly lowered of aluminium section designed DG-2762 (40 mm x 32 mm x1.5 mm thick) (wt 0.668 kg/mtr) frame and DG-2763 and middle section of designed DG-2763 (40 mm x 32 mm x 1.5 mm thick) (wt 0.654 kg/mtr), middle section DG-2546 (17.27 mm x 17.15 mm x 1.22 mm thick) (wt 0.124 kg/mtr) including 5 mm thick pinheaded figured glass louvers with blades of 100 mm heavy duty including with aluminium lever handle fixed panel shall be provided with 5 mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed with minimum 6 Nos of suitable size galvanised screws with PVC plug etc complete all as specified and directed.
S&F for (factory made) steel windows with side hung shutters including projecting type hinges with lugs steel handles and steel peg stays, with glazing bars, devetailed or welded complete all as specified and directed.
S&Ffor (factory made) steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified.
S&F for 105X60 mm size of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.
S&Ffor 125X60 mm size of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.
M&L for plain cement concrete Type C1, 1:3:6 ( using 20 mm graded aggregate) for filling of hollow pressed steel frame complete all as specified and directed.
S & F for25 x 3mm F1 hold fast conforming to Fe 290, Gde -E-165 complete all as specified and directed.
M&L for plain cement concrete Type B-0 1:2:4 (using 12.5 mm graded stone aggregates) for fixing hold fast including repairing of disturbed plaster (while taking down Door/window,ventilator frame) and matching the repaired surface with existing one complete all as specified and directed.
S&F for 35mm thick second class hardwood factory made flush shutters, solid, core construction with black board core and plywood face panals commercial type on both sides complete all as specified and directed.
S&F for 35 mm thick second class hardwood factory made glazed and skelton shutters open rebated and prepared to receive glass gauge etc. wihout sash bars sizes of the members of the shutters as specified in SSR Part-I section 8 , clause 8.24 (a) complete all as specified and directed.
S & F for Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube as specified & directed.
S&F for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail bottom rail on either side & as gap insert for top rail & bottom rail panel ling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stile & rails with suitable PVC sheet beading & joined together with solvent cement specified and shown on drawing complete all as specified and directed.
S&F for Solid PVC Double door frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing specified & directed.
S&F for 18mm thick Solid PVC Sandwich Panel with lmm plain colour PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing complete all as specified and directed.
S&F for100mm butt hinges extruded aluminum alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed.
S & F for150 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed.
S & F for 300 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and directed.
S&F for 150 mm long aluminum anodized barred tower bolts of extruded section complete all as specified and directed.
S & F for Aluminium door stopper of size 150 mm long double legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with aluminium plate base fixed with door shutter with screws at appropriate height complete all as specified and directed.
S&F for MS 300mm helical door springs including roller and roller plate complete all as specified and directed.
S&F for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repair 150mm brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed
S&F in repair 150mm size extruded alluminium alloy handle fabricated type anodaised
S&F in repair 150mm size extruded brass handle fabricated type polished complete all as specified.
S&F in repair 300mm size Length alluminium alloy anodised sliding door bolt with hasp & staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast alluminium alloy.
S&F in repair 300mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified.
S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.etc., complete all as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified
S&F for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified.
M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
Resecuring or easing and adjusting without taking down Shutters of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed.
Resecuring or easing and adjusting without taking down Shutters of any description exc 2 sqm each complete all as specified and directed.
Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for PCC 1:5:10, type E-2 using 40mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed.
M&L for 15 mm thick renedering on fair faces of brick work or concrete surfaces in cement mortar (1:3) finished even and smooth without using extra cement with using water proofing liquid complete all as specified and directed. (WPL shall be measured and paid separately)
M&L forApplying acrylic cementicious polymer modified elastomeric waterproofing & protective coating like brush bond of Fosroc or Pidifin 2K (Pidilite) as per manufacturer instructions on rendered surfaces of floor and wall of sunken portion complete all as specified and directed.
Demolition of brick work/ stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.
Taking down cement plaster on brick/concrete/stone surfaces including racking out jointing hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for old size bricks with fly ash bricks straight or curved on plan exc. 6m mean radius and setting in cement mortar 1:6 etc. complete all as specified as directed.
M&L for 10 mm thick renedering on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering on fair faces of brick surfaces in CM (1:4), first coat 10 mm thick plaster in CM 1:4 and second coat 5 mm thick in CM 1:4 with using water proofing liquid finished surfaces even and smooth without using extra cement complete all as specified and directed. (WPL shall be measured and paid seperately).
Material & labour for 5 mm thick cement plaster on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete in complete all as specified and directed.
Material & labour for preparation of new plastered surfaces of celling and applying two coat of white lime wash complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified and directed.
M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 20 mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F for 15mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified and directed.
S&F for 20 mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified and directed.
M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall complete all as specified and directed.
Dismantling of water tanks of 500 ltrs capacity and removing to store and S&F of 500 ltrs rotational moulded HDPE water storage tanks ISI marked in three layers (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
Dismantling of water tanks of exc 500 ltrs and n exc 1000ltrs capacity and removing to store and S&F of 500 ltrs and n exc 1000 ltrs rotational moulded HDPE water storage tanks ISI marked in three layers (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
Cleaning and removing all scale and dirt etc from water tanks and from mouths of circulating pipe exc 500 and n.exc 1000 ltr capacity tank. After cleaning write the date of cleaning with paint on tank complete all as specified and directed.
All as item No 88 above but exc 250 and n.exc 500 ltr capacity complete all as specified and directed.
S&F for 20mm bore ball brass valve, high pressure with polythene float & fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.
S&F in repair 20mm bore Gun metal gate valve with iron wheel head screwed both end for iron pipe complete all as specified and directed.
Demolition and breaking up 110/75 mm dia drain pipes (Salt glazed ware, PVC, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
S&F for110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified.
S&F for PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls 75mm bore complete all as specified and directed.
S&F for 110mm bore PVC (S.W.R) bend with access door complete all as specified and directed.
S&F for 110mm bore PVC (SWR) branch piece, single `Y’ equal or un equal with access door complete all as specified and directed.
S&F for 75mm bore PVC (S.W.R) bend with access door complete all as specified and directed.
S&F for 110mm bore PVC vent cowl complete all as specified and directed.
S&F for PVC floor trap 75 mm dia with CP gratings complete all as specified and directed.
S&F for PVC nahani trap 110 mm dia with CP gratings complete all as specified and directed.
S&F in repairs brass chromium plated bottle trap for wash basin/sink with inlet and outlet screwed for pipe or connections including necessary packing, union and cap bore of trap 32mm fixed complete all as specified and directed.
S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover complete all as specified and directed.
S& F in repairs vitreous china water closet squatting pan 'orissa pattern, ivory coloured of size 580 x 440 mm, with integral foot rest and outlet for 'P' or 'S' trap , WC pan shall be set in lean concrete below level of rim of pan to receive the floor finish complete all as specified and directed.
S&F in repair PVC valveless syphonic action type flushing cistern 10 ltrs capacity low lwvel, white with inlet ball valve, float and handle including brackets flush pipe of polythene of low or high density of PVC 32mm dia for low level cistern complete all as specified.
S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm including brackets complete all as specified and directed.
S&F in repairs vitreous china white counter oval shape wash hand basin of size 630x450mm incl brackets complete all as specified.
S&F in repairs sinks made of stainless steel 1 mm thk kitchen with plugs, washers and wastes incl bedding in cement mortar on to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 495mm X 420mm bowl size size 410mm X 330 mm X 160MM complete all as specified and directed.
S&Ffor waste coupling brass CP for glazed ware sink, WHB etc with long screwed shanks and fly nuts complete of 32mm dia.etc. complete all as specified and directed.
S&F in repairs tubular towel rail 20 mm dia 'D' type 600mm long of stainless steel complete all a specified and diredted.
S&F in repairs 15mm bore fancy type long neck chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes complete all as specified and directed.
S&F in repairs angle stop valves 15mm bore, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified
S&F in repairs 15mm bore PVC connection with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repair 15 mm dia brass CP wall mixer unit for mixing hot & cold water screwed down for iron pipe and fixed including all necessary fittings complete all as specified and directed.
Supply and fix in repair 15 mm bore long neck CP pillar taps, fancy type, cast copper alloy with capstan heads screwed down high pressure with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.
Supply and fix in repair 15 mm bore long neck CP pillar taps, fancy type, cast copper alloy with capstan heads screwed down high pressure with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.
S&F in repair brass chromium plated shower rose 125mm size complete all as specified and directed.
S&F in repairs 20 mm dia curtain rod brass chromium plated with fixing fancy bracket stops rollers etc for any size of opening complete all as specified and directed.
S&F in repair kitchen steel plate rack of size 786x914x254 mm stainless steel of standard quality including fittings complete all as specified and directed.
S&F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.
Supply and fix in repair 15 mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed as specified and directed by eng in charge.
S&F in repairs Seat cover ( colour - white ) for Vitreous China wash down water closet pan (pedestal pattern) all as specified and as directed.
S&F in repair CP health faucets including all neceesary fittings specifictions all as specified and directed.
S&F in repair CP Cloth peg set including fittings complete all as specified and directed.
S&F (fixed in repair) CP two way bib cock specifictions all as specified and directed.
S & F in repair PVC waste pipe 32 /40 mm dia x 600 mm long complete all as specified and directed.
S&F in repairs 40mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repairs 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
Supply and fix in repairs 20mm bore ball brass valve, high pressure with polythene float and flynut complete, scrwed for iron pipe or brass ferrule fixed in repair complete all as specified and as directed.
S&F in repairs 15mm bore brass CP wash basin mixture for mixing hot and cold water complete all as specified fixed including all necessary fittings complete all as specified and directed.
M&L for preparing new steel surfaces and applying two coat of syntheitc enameled paint over a red oxide primer exc 10 cm width or girth complete all as specified and directed.
M&L for preparation of new or previously un treated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of priming complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats distmper oil emulsion over a coat of primer and avg 3 mm thick wall care putty complete all as specified and directed.
M&L for prepraring newly plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and as directed.
Schedule of credit amount of Rs. 233140.00to be deducted during AOC.
M/S CHETAN PRAKASH GOYAL (BID ID -3132891)
a k builders (BID ID -3132393)
ISHWAR CONSTRUCTION COMPANY (BID ID -3132942)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .